Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.
Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.
EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.
Steyr Mannlicher, a renowned company that produces firearms, was founded in 1864 by Josef Werndl. It soon grew into a big company with great production capacity. In 1882, they faced a small crisis because of lack of large orders (they have supplied the European armies with breech loading rifles – demand has declined). This is when Werndl used the company's production capacity to manufacture all sorts of products along with firearms: dynamos, electric motors, light bulbs, bicycles, cars, trucks. The company's most active years were without doubt during World War I when more than 4000 firarms were made daily by its 15.000 employees. The company's name was changed to Steyr-Daimler-Puch AG in 1987.
Model M is a bolt-action rifle that was first introduced in 1973. It was based on Model L but is equipped with a larger and heavier receiver for longer cartridges. They chambered it for 6.5x57mm, .270 Win., 7x57 mm, 7x64 mm, .30-06 Sprg., 8x57 mm and 9.3x62 mm. Later, they added the 6.5x55 mm and 7.5x55 mm versions. Model M has a five-round rotating magazine and was developed specifically for hunting deer. Stutzen, Mountain and Professional versions were also introduced. The standard M model is 110 cm long and weighs 3.15 kg. There are four holes drilled and tapped on the receiver for mounting purposes.
Steyr Luxus' barrel with mounted optics can be easily removed from the rifle and replaced – Luxus is a flexible bolt-action rifle appropriate for all sorts of hunting situations. The barrel comes with a Picatinny rail. The Standard model and the Mountain model are both chambered for the following calibers: .243 Win., .308 Win., 7mm-08 Rem., 7x64, .270 Win., .30-06 Spr., 6.5x55 SE, 8x57 JS, 9.3x62. The Magnum version is chambered for: 7mm Rem. Mag., .300 Win. Mag., 8x68 S, .270 WSM, *.300 WSM, *.375 H&H.
A: 10 mm
B: 99.9 mm
C: 10 mm
BHU: 0 mm
Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.
The product has a warranty period of 30 years.
|Mount series||EAW Picatinny Rails|
|Suitable for||Steyr L - Luxus, Steyr Luxus, Steyr M - Luxus, Steyr S - Luxus, Steyr-Mannlicher M|
|BH height||6.5 mm|