INNOmount Fixed Mount for Tikka T3, 35 mm

• Fixed two-screw attachment: The mount secures to the rifle base with two clamping screws for a firm, tool-fastened connection that stays in place under recoil and hard field use.
• 35 mm ring interface: Built for 35 mm scope tubes, it gives a direct fit for larger optics that often offer more elevation travel and stronger low-light performance.
• 0 MOA inclination: The straight, non-canted setup keeps the optic aligned for conventional zeroing distances and suits hunting rifles that do not need added long-range pre-tilt.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity needed for a stable riflescope mounting platform.
• Rifle-specific Tikka fit: Designed for the Tikka T3 and T3x platform, it provides a dedicated interface that simplifies installation and helps maintain consistent optic positioning.

About the INNOmount Fixed Mounts Series

INNOmount Fixed Mounts are the non-quick-detach branch of the INNOmount lineup, built for shooters who want a permanent, tool-fastened scope mounting solution rather than a mount that is removed in the field. The series uses two clamping screws to secure the mount to the rifle base, and the screws are intended to be tightened with a torque wrench in line with the assembly instructions. In practical use, that gives the mount a simple mechanical layout with little to distract from its main job: holding the optic in place with repeatable alignment.

The series covers a broad range of rifle-specific bases, including Tikka T3/T3x, and is offered for several optic interfaces such as ring mounts and rail-based designs. This makes the family relevant to both classic hunting rifles and more specialized setups. Compared with quick-clamping designs, the fixed versions suit users who prefer a mount that cannot be released without tools, which is often an advantage on rifles that keep one optic installed full time. One-piece and two-piece variants are available across the range, depending on the rifle and sight interface.

About the INNOmount Fixed Mount for Tikka T3, 35 mm

The INNOmount Fixed Mount for Tikka T3, 35 mm is a rifle-specific scope mount made for shooters who want a stable, low-complexity setup on the Tikka T3 and T3x action. Its defining feature is the 35 mm ring size, which matches larger main-tube riflescopes often chosen for hunting optics with generous adjustment range or large-objective, low-light configurations. By using a direct ring mount rather than an adapter-heavy arrangement, the system keeps the installation straightforward and purpose-built.

This version uses a fixed attachment system with no quick-release function and no adjustable windage. In practice, that means fewer moving parts and a mounting concept centered on consistent alignment rather than frequent optic changes. The 0 MOA inclination also points to a conventional zeroing role, making it well suited to general hunting and sporting rifle use where a neutral mounting angle is preferred over added elevation bias for extended-range dialing.

The mount is made from aluminium and finished in black, giving it a combination of corrosion-resistant practicality and a subdued appearance that fits modern rifle builds. With KR 0.0 mm extension and 0° offset angle, it keeps the layout simple and centered around a standard optic position. For a Tikka owner running a 35 mm scope tube, this mount is aimed at a clean, dedicated installation that prioritizes secure fit and everyday reliability.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts, and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of sporting and hunting firearm accessories rather than general outdoor hardware. Within the INNOmount range, the company offers both quick-clamping and fixed rifle mounts as well as tactical, swing, and tilt-up designs.

The brand covers a wide spread of rifle and optic interfaces, including mounts for Weaver/Picatinny rails and several rifle-specific bases. Ring sizes include 25.4 mm, 30 mm, 34 mm, and 35 mm, reflecting a focus on practical compatibility with common European and international scope formats. That specialization gives INNOmount a clear role: producing dedicated mounting solutions for hunters and shooters who need a precise mechanical connection between rifle and optic.

Main Features

• Manufacturer: INNOmount
• Mount series: INNOmount Fixed Mounts
• Made in: Germany
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Adjustable windage: No
• Scope / Sight type: 35 mm
• Tube diameter: 35
• Offset angle: 0°
• Bubble level: No
• Color: Black
• Material: Aluminium
• Compatible rifles: Lynx Light Hunter MA, Lynx Light Hunter SA, Lynx 94 MA, Lynx 94 LA, Lynx 94 SA, Lynx TD 21 MA, Lynx TD 21 LA, Lynx TD 15 LA, Lynx TD 15 MA, Lynx TD 12 LA, Lynx TD 12 MA, Sako TRG 21/41, Sako TRG 22/42, Sako 90 XS Optilock, Sako 90 S Optilock, Sako 90 SM Optilock, Sako 90 M Optilock, Sako 90 L Optilock, Tikka M558, Tikka M590, Tikka M595, Tikka M690, Tikka T3, Tikka T3x

Warranty

10 years. This mount is covered by a ten-year warranty period, giving long-term support for a component that is central to secure optic retention and consistent rifle setup.