Warne One-Piece Tactical Rail for Tikka T3

• One-piece Picatinny platform: Gives a Tikka T3 or T3x a continuous mounting surface, making it easier to position modern optics for proper eye relief and a balanced rifle setup.
• Steel construction: The steel body adds rigidity and secure support for riflescope mounting, which helps maintain alignment under repeated recoil and hard field use.
• Tikka-specific fit: Built for the Tikka T3 footprint and 16.5 mm dovetail interface with the correct notches and holes, so installation is straightforward and the rail seats correctly on the action.
• Matte finish: The non-reflective matte surface keeps glare down and matches practical hunting or tactical rifle builds without drawing attention in bright light.
• Low-profile height: With a 4.00 mm BH height, the rail keeps the optic close to the bore, which supports a solid cheek weld and a more natural shooting position.

About the One-Piece Tactical Rail Series

Warne one-piece tactical rails are designed as firearm-specific mounting bases for shooters who want a stable, repeatable interface between rifle and optic. In Warne’s lineup, these rails sit in the practical end of the mounting category: they are built to provide the versatility of a Picatinny-style top rail while matching the receiver geometry of specific actions. That makes them relevant for hunting rifles, general-purpose field rifles, and precision-oriented setups that may need more flexibility than fixed two-piece bases.

The series focuses on straightforward mechanical strength, secure attachment, and compatibility with a wide range of rings and optics. A one-piece rail also gives more latitude for scope placement, which matters when combining different tube lengths, eye relief requirements, or shooting positions. In use, that translates into easier optic selection and fewer compromises when setting up a rifle for stalking, range work, or mixed-use shooting. The design philosophy is simple: a durable mounting foundation, a clean fit to the host rifle, and a standardized top interface that works with modern riflescope mounting systems.

About the Warne One-Piece Tactical Rail for Tikka T3

The Warne One-Piece Tactical Rail for Tikka T3 is built for shooters who want to move from the rifle’s native dovetail arrangement to a more flexible Picatinny rail format. On a Tikka T3 or T3x, that matters because it opens the door to a broader choice of rings and makes it easier to position a riflescope exactly where it needs to be. Whether the rifle is set up for hunting optics or a heavier precision scope, the longer mounting surface helps accommodate different tube lengths and eye relief demands.

The rail uses a steel body, which suits rifles that see regular transport, repeated recoil, and hard use in the field. Steel adds confidence when the optic is expected to stay firmly in place over time, especially on rifles that may be carried in vehicles, used from improvised rests, or exposed to rough handling. The matte finish keeps the installation subdued and practical, while the low 4.00 mm BH height helps keep the optic close to the bore. That lower mounting position can improve cheek weld and make the rifle feel more natural when shooting from unsupported positions.

Because this rail is made specifically for the Tikka T3 platform and the 16.5 mm dovetail pattern with the correct notches and holes, it is intended to fit the action properly rather than relying on a generic adapter approach. The result is a cleaner, more purpose-built mounting solution for shooters who want a dependable base for modern scope rings and accessories.

About Warne

Warne Manufacturing Company was founded in February 1991 in Clackamas, Oregon, and it focuses on mounting systems for the shooting sports industry. The company’s product range centers on scope mounts and related hardware, with established lines such as Maxima, Mountain Tech, and Skyline. That specialization has made Warne closely associated with the practical side of rifle setup: creating rings, bases, and rails that connect optics securely to the firearm.

Warne is now based in Tualatin, Oregon, United States. Its background also traces to Sporting Arms Limited, founded in January 1947 in Adelaide, South Australia, which adds a longer historical thread to the brand’s development. Across its mounting products, Warne is known for designing systems around real firearm fitment and standardized rail compatibility, making it a familiar name for shooters building hunting rifles, sporting rifles, and precision-oriented setups.

Main Features

• Manufacturer: Warne
• Product type: One-piece Picatinny rail
• Compatibility above: Picatinny Rail
• Compatibility below: Tikka T3, Tikka T3x, 16.5 mm Dovetail with Tikka T3 notches and holes, Lynx Light Hunter MA, Lynx Light Hunter SA, Lynx 94 MA, Lynx 94 LA, Lynx 94 SA, Lynx TD 21 MA, Lynx TD 21 LA, Lynx TD 15 LA, Lynx TD 15 MA, Lynx TD 12 LA, Lynx TD 12 MA
• Material: Steel
• Color: Matte
• BH height: 4.00 mm
• A: 21.9 mm
• B: 82.2 mm
• C: 21.9 mm
• Made in: USA

Warranty

Warne provides a 10-year warranty for this rail. This stated warranty period gives clear long-term coverage for a component that serves as the foundation of the optic mounting system.