4.77/5 out of 1.900+ reviews Great reviews
United States
USD - VAT Excluded
Localization Settings
English
USD
VAT Excluded
Compare Products
You have no items to compare.
Shopping Cart
You have no items in your shopping cart.
// 29.9.2023 GA4 add to cart // 29.9.2023 GA4 add to cart

Smartclip Adapter - PS

Videos
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

Smartclip Adapter - PS Details

About Smartclip

Smartclip is a Slovenian company known for its manufacture of adapters for clip-on devices, noted for their robust construction and superior finish. The adapters feature a distinctive lever that closes inward toward the adapter body, unlike many competitors' adapters where the lever shifts from the rear (loose) to the front (fixed). Hunters often detach the clip-on from the scope to swiftly scan the area. In the dark, particularly when excited by the sounds of nearby wildlife, there's a risk of quickly bringing the device close to the face, potentially poking the eye or surrounding skin with the lever in the loose position. Ludwig Dvojmoč, the company’s founder, developed the unique lever design in response to several injuries caused by traditional lever mechanisms, effectively eliminating the risk of such mishaps.

Ludwig Dvojmoč has experience working with well-known companies in the sports optics industry, such as Zeiss and Aimpoint. He played a pivotal role in establishing the Slovenian chapter of the International Practical Shooting Confederation (IPSC) and contributed to the amendment of several rules in the competition overall.

About the Smartclip PS adapter

The Smartclip PS adapter is specifically designed for the front scope-mounted clip-on devices that feature the Pulsar Forward mounting standard. It is constructed as a one-piece unit without any reducing rings. This design means that the available size options are limited. If the correct size for your riflescope is not available, consider going for the two-piece solution – the Smartclip AS adapter, where 99% of all sizes are available, along with a Pulsar Forward reducing ring to ensure compatibility. This combination is available here.

Smartclip adapters – size guide

With Smartclip adapters, the number in the adapter’s name indicates the outer objective diameter of the riflescope that it is designed to fit onto (in millimeters). To ensure you choose the correct adapter, measure the diameter of your riflescope’s objective using calipers (see the image below).

Figure 1: Measure the outer objective diameter of your riflescope with calipers.

You can refer to our extensive riflescope outer objective diameter chart for more information.

If you need assistance or are unsure about the measurements, feel free to contact our sales team at [email protected] for help.

Devices that share the Pulsar Forward mounting standard

Mounting instructions

Mounting a device with the Pulsar Forward mounting standard on the adapter

Position the four pins of the adapter to match the four notches on the device that features the Pulsar Forward mounting standard. Turn the adapter to the left until it clicks into place.

Mounting the adapter on a riflescope

Start by placing the lever in the open position. Push it away from the adapter body to do this. Next, verify if the adapter fits onto the riflescope's objective. If it doesn't fit properly, you will need to make some adjustments:

  1. Unscrew the lock screw, which is positioned perpendicularly to the adjustment screw.
  2. Turn the adjustment screw. Rotate it clockwise to tighten or counter-clockwise to loosen, depending on the fit needed.
  3. Continuously check if the adapter can be placed on the objective while you make slight adjustments to the screw. When the adapter is placed on the objective, try closing the lever slowly – the resistance should be just right, not too loose and not overly tight. Keep adjusting the screw until the lever secures into position with just enough resistance. Be cautious: attempting to close the lever on an overtightened adapter may break the lens of the riflescope! Check the fit by firmly moving the adapter to ensure it is securely attached.
  4. Once you achieve the desired fit, secure the adjustments by screwing the lock screw back into place. 
Add to Compare Save and send

Smartclip Adapter - PS Specifications

ManufacturerSmartclip
Accessories seriesSmartclip Accessories
Made inSlovenia
In production sinceNo
Warranty2 years
SKUSMART56-Pc
Weight.100g
Height.0 mm
Length.0 mm
MaterialAluminium
ColorBlack
Accessories forThermal Clip-on

Why

Shopping at optics-trade?

  • Worldwide shipping
  • Team of experts & enthusiasts
  • We understand what we sell
  • People from all over the world trust us

Reviews & Testimonials

Reviews for Smartclip Adapter - PS

No reviews yet. Please write a review.
Do you have any experience with this product?
We would love to hear your opinion by rating it:
Write a review

Most common questions (Q&A)

Community uploads

Leave a message