INNOmount Guide TS450 Pivot Mount, Anschutz 1770/54

• Pivot mount design: The swing-away construction lets the optic be removed and returned to the rifle in a controlled, repeatable way, which is useful for transport, storage, or switching between sighting setups.
• Guide TS interface: This version is built for the Guide TS mounting standard, giving a dedicated fit for compatible thermal optics instead of relying on generic adapters.
• Adjustable windage: Built-in lateral adjustment helps align the optic and rifle more precisely, reducing the need to compensate with excessive reticle correction.
• 28.00 mm build height: The specified mounting height helps position the optic at a practical level above the action, supporting a stable cheek weld and comfortable viewing position.
• Aluminium construction with 0 MOA inclination: The aluminium body keeps weight under control while maintaining rigidity, and the flat 0 MOA setup suits rifles and optics intended for straightforward hunting or general field use.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the manufacturer’s swing-mount category and are built around the idea of combining a secure rifle-specific fit with fast, practical handling in the field. The series is intended for shooters and hunters who want an optic mount that can be detached or swung clear without moving to a bulky universal system. Across the range, the mount body is made from high-strength aluminum, keeping the design rigid while avoiding unnecessary weight on the rifle.

The series covers a broad mix of rifle and optic interfaces rather than a single platform. Depending on the application, the lineup is available with a lever lock for a 15 mm prism or an EAW pivot-bolt lock, and listed upper interfaces include conventional rings as well as rails such as Swarovski SR and Zeiss ZM/VM. In practical terms, that makes the Pivot Mount family relevant to both classic day optics and more specialized sighting systems, while keeping the same basic design philosophy: a rifle-specific lower, a dedicated upper, and a repeatable pivoting attachment method suited to field rifles.

About the INNOmount Guide TS450 Pivot Mount, Anschutz 1770/54

The INNOmount Guide TS450 Pivot Mount, Anschutz 1770/54 is a dedicated one-piece pivot mount configured for rifles in the Anschutz 1770 / Match 54 pattern and for optics using the Guide TS mounting standard. That combination makes it especially relevant for hunters fitting a compatible thermal device to a traditional sporting rifle while keeping the installation specific to both the firearm and the optic interface. Instead of adapting several parts together, this mount is built around a defined pairing, which helps keep the setup cleaner and mechanically more consistent.

Its 28.00 mm height gives the optic a practical position above the rifle, helping maintain a natural head position and a stable cheek weld. The 0 MOA inclination keeps the mount neutral, which suits general hunting distances and avoids introducing extra cant where it is not needed. A further practical feature is the adjustable windage, which allows finer lateral alignment between rifle and optic. That can be valuable when mounting thermal equipment, where preserving usable reticle adjustment range matters just as much as achieving a centered zero.

The mount body is made from aluminium and finished in black, giving it the combination of low weight, corrosion resistance, and understated appearance expected from a field mount. As a pivot design, it also supports easier handling when the optic needs to be removed for transport or when the rifle is used in different configurations, while still remaining purpose-built for the Guide TS platform.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts, and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of sporting and hunting optics hardware rather than general accessories. Within the INNOmount range, the company offers both quick-clamping and fixed rifle mounts, covering applications from conventional hunting rifles to more specialized optic setups.

The brand’s catalog includes mounts for Weaver/Picatinny rails as well as numerous rifle-specific bases, and its product types extend across tactical, swing, and tilt-up mounts. INNOmount also supports a wide spread of optic formats through ring sizes such as 25.4 mm, 30 mm, 34 mm, and 35 mm. That breadth is important in practice because it shows a focus on precise mechanical fit across different rifles and sighting systems, which is exactly the kind of specialization expected from a dedicated mount manufacturer.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Height: 28.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: Yes
• Optic type: Guide TS
• Color: Black
• Mount type: One Piece Pivot Mount
• Compatibility: Guide Bottom Mounting Standard

Warranty

INNOmount covers this mount with a 2-year warranty. That period suits a precision mounting component intended for regular field use and repeated installation on a compatible rifle and optic combination.