Forster Bushing Bump Neck Sizing Die Kit with 3 Neck Bushings 6.5x55mm

• Interchangeable neck bushings: The kit includes three pre-selected bushings, letting the reloader fine-tune neck tension for different brass lots or bullet seating preferences without changing the entire die setup.
• Bump neck sizing design: By combining neck sizing and shoulder bumping, this die helps maintain case fit to the chamber while still supporting reliable chambering in repeat-use rifle brass.
• Steel die construction: The steel body is built for repeated bench use and consistent adjustment, which matters when loading large batches or chasing repeatable results over time.
• Standard press fit: The 7/8"-14 thread works with common reloading presses, making it easy to integrate into an existing setup without special adapters for typical single-stage use.
• 6.5x55-specific kit: Built for the 6.5x55 Swedish family of cartridges, this die kit suits reloaders working with classic hunting and target rifle chamberings that benefit from careful case preparation.

About the Bushing Bump Neck Sizing Die Kits with 3 Neck Bushings Series

Forster Bushing Bump Neck Sizing Die Kits are designed for reloaders who want more control than a conventional fixed-neck sizing die provides. In the Forster reloading die range, this series sits as a precision-oriented option for shooters who tune ammunition for consistent neck tension, repeatable bullet release, and better case management over multiple firings. The defining feature is the use of interchangeable neck bushings, which allows the die to be matched more closely to brass thickness and loading goals instead of forcing every case through one fixed dimension.

The series is aimed at careful handloaders working with bottleneck rifle cartridges for hunting, target shooting, and general precision rifle use. Its bump-sizing concept is especially useful where the goal is to preserve much of the fired case fit while still applying a controlled shoulder setback for dependable feeding and chambering. Compared with a full-length sizing approach, this style gives the user more flexibility in balancing brass life, chamber fit, and loading consistency. Across the series, the emphasis is on precision adjustment, compatibility with standard presses, and a practical benchrest-style approach to cartridge case preparation.

About the Forster Bushing Bump Neck Sizing Die Kit with 3 Neck Bushings 6.5x55mm

The Forster Bushing Bump Neck Sizing Die Kit with 3 Neck Bushings 6.5x55mm is built for reloaders working with the 6.5x55 Swedish cartridge family who want more control over case sizing than a standard neck die usually offers. Its main advantage is the combination of decapping, neck sizing, and shoulder bumping in one die, which supports a more tailored fit between cartridge and chamber. In practice, that means the reloader can keep much of the case body fire-formed to the rifle while still setting the shoulder back enough for smooth chambering.

The included three neck bushings are what make this kit especially useful. Rather than accepting one fixed amount of neck reduction, the user can choose a bushing that better matches brass wall thickness and the desired hold on a 6.71 mm / .264 bullet. That flexibility is valuable when changing brass brands, sorting cases by neck thickness, or refining a load for more uniform seating feel and release characteristics.

The die uses a steel construction and a standard 7/8"-14 thread, so it fits readily into common reloading press setups. As a single bushing die for bottleneck rifle cases, it suits handloaders who prioritize repeatability and careful case preparation over high-volume processing. For 6.5x55 rifles used in hunting or target shooting, this configuration gives a practical way to manage brass with greater consistency from one loading cycle to the next.

About Forster

Forster Products dates its history to 1935 and has long focused on precision reloading and gunsmithing tools. The company is based in Lanark, Illinois and states that its products are made in the United States. Within the shooting and reloading market, Forster is known for equipment intended to improve alignment, consistency, and repeatability at the loading bench.

Its product range includes reloading dies, case trimmers, headspace gauges, and sight-mounting fixtures, showing a broad specialization in tools for cartridge preparation and rifle setup. Among its better-known reloading products is the Co-Ax Press, while its Bench Rest seating dies are recognized for using a close-fitting chamber to help align the case and bullet during seating. That background makes Forster a well-established name for reloaders who want carefully engineered tooling rather than general-purpose bench equipment.

Main Features

• Manufacturer: Forster
• Made in: USA
• Warranty: 2 years
• Die operation: Decapping, Neck sizing
• Pack size: Single
• Die type: Bushing
• Bushing: Yes
• Bushing style: Competition Bushing Neck Die
• Case body design: Bottle neck
• Case type: Rifle
• Sizing die material: Steel
• Material: Steel
• Adjustment: Standard
• Press compatibility: Standard 7/8"-14 thread
• Bullet Diameter (mm): 6.71 mm
• Bullet Diameter (inch): 264.00 inch
• Compatible calibers: 6.5x55 SE, 6.5x55mm Swedish, 6.5x55 SKAN, 6.5x55 Krag, 6.5x55mm Mauser

Warranty

Forster provides a 2-year warranty for this die kit. That stated term suits a precision reloading tool intended for regular bench use and long-term service.

In the Box

• Bushing Bump Neck Sizing Die
• 3 neck bushings