Forster Bench Rest Bushing Bump Neck Sizing Die 223 WSSM

• Bushing neck sizing control: The Competition Bushing Neck Die design lets the reloader tune neck tension with interchangeable bushings, which helps match brass preparation to a specific bullet and load for more consistent release.
• Shoulder bump capability: This Bench Rest Bushing Bump Neck Sizing Die sizes the neck while also allowing a controlled shoulder set-back, helping fired .223 WSSM brass chamber smoothly without working the whole case more than necessary.
• Bench-rest oriented operation: By combining decapping and neck sizing in one die, it supports precision rifle loading where case fit to the chamber is preserved as much as practical for repeatable results.
• Steel die construction: The steel body is suited to repeated loading sessions and maintains stable die geometry, which matters when small setup changes can affect neck tension and shoulder position.
• Standard press fit: The 7/8"-14 thread works with common reloading presses, making it easy to integrate into an established bench setup without special adapters.

About the Bench Rest Series

Forster Bench Rest dies are built for reloaders who want tighter control over cartridge alignment and case preparation than standard hunting dies usually provide. Within the company’s reloading lineup, the series sits as a precision-focused option for shooters working with bolt-action rifles, varmint rifles, and other setups where ammunition uniformity matters. The Bench Rest family includes sizing and seating tools designed around repeatable adjustment, careful case handling, and compatibility with specialized components such as neck-sizing bushings.

In practical terms, the series is aimed at handloaders who want to tune ammunition to a rifle rather than simply produce serviceable rounds in volume. Bench Rest sizing dies emphasize controlled case sizing, while related seating dies in the same family are known for their close-fitting alignment approach. That design philosophy makes the series well suited to precision shooting, load development, and applications where brass life and chamber fit are part of the performance equation. For reloaders who prefer to adjust neck tension and manage shoulder movement carefully, the Bench Rest range offers a more specialized path than conventional full-length die sets.

About the Forster Bench Rest Bushing Bump Neck Sizing Die 223 WSSM

The Forster Bench Rest Bushing Bump Neck Sizing Die 223 WSSM is a single rifle die made for reloaders who want to keep the advantages of neck sizing while still managing chambering reliability in .223 WSSM brass. Instead of sizing the entire case body, this die focuses on the neck and allows a controlled shoulder bump, which is useful when fired cases need a slight dimensional reset for smooth bolt closure without moving more brass than necessary.

The defining feature is its Competition Bushing Neck Die format. Because the die uses bushings, neck tension can be tailored to the brass and bullet combination rather than fixed by a one-size-fits-all internal dimension. In practice, that gives the handloader a more deliberate way to balance bullet grip, concentricity, and case working during load development. For a cartridge such as .223 Winchester Super Short Magnum, where precision and consistent feeding both matter, that flexibility is a meaningful advantage.

The die also combines decapping and neck sizing in one operation, streamlining case preparation on the loading bench. Its steel construction supports long-term dimensional stability, and the standard 7/8"-14 thread means it fits common presses without special hardware. For the reloader building accurate rifle ammunition around a known chamber, this die is designed to give more control over how the case neck and shoulder are managed from one loading cycle to the next.

About Forster

Forster Products dates its history to 1935 and focuses on precision reloading and gunsmithing tools. The company’s range includes reloading dies, case trimmers, headspace gauges, and sight-mounting fixtures, reflecting a long-standing emphasis on tools used to control ammunition dimensions and firearm setup more precisely. Forster is also known for the Co-Ax Press, one of its established reloading products, and for Bench Rest seating dies that use a close-fitting chamber to help align the case and bullet during seating.

That background is directly relevant to a product such as the Bench Rest Bushing Bump Neck Sizing Die, because it comes from a manufacturer with a deep focus on the mechanical side of cartridge consistency. Forster Products is based in Lanark, Illinois, and states that its products are made in the United States.

Main Features

• Manufacturer: Forster
• Made in: USA
• Die operation: Decapping, Neck sizing
• Pack size: Single
• Die type: Bushing
• Bushing: Yes
• Bushing style: Competition Bushing Neck Die
• Case body design: Bottle neck
• Case type: Rifle
• Sizing die material: Steel
• Material: Steel
• Adjustment: Standard
• Press compatibility: Standard 7/8"-14 thread
• Bullet Diameter (mm): 5.66 mm
• Bullet Diameter (inch): 223.00 inch
• Compatible calibers: .223 WSSM, .223 Winchester Super Short Magnum

Warranty

Forster backs this die with a 2-year warranty.