Dentler Pair of Steel Rings, 36 mm

• Steel ring construction: The steel body gives these 36 mm rings the rigidity needed for a secure hold on heavy optics and repeated recoil, helping the sight stay aligned over time.
• Dentler BASIS compatibility: Designed as part of the modular BASIS mounting system, the rings let the optic remain on its mounting rail for repeatable installation and straightforward optic changes.
• Ø 8 mm interface support: Compatibility with Dentler, Henneberger, MAK, Kozap, Mauser and Recknagel Ø 8 mm interfaces makes these upper parts useful when matching a 36 mm optic to several established base formats.
• KR 0.0 mm configuration: The neutral extension keeps the optic position straightforward, which suits rifles where the correct eye relief can be achieved without added forward or rearward offset.
• Made in Germany: German manufacture reflects the series focus on precise fit and consistent machining, both of which matter when a mounting system is expected to return to the same position after removal and refitting.

About the Dentler Steel Rings Series

The Dentler Steel Rings series belongs to the company’s BASIS modular riflescope mounting system, developed for hunters who want to combine one optic with a suitable mounting rail rather than treat the mount as a fixed, one-rifle solution. Within the Dentler lineup, these ring modules serve the traditional scope user who prefers a ring-mounted optic but still wants the flexibility of the BASIS concept.

The series is built around the idea that the optic stays attached to the mounting rail, while the rail locks onto the firearm-specific base with consistent torque and a play-free fit. In practice, that supports repeatable optic changes and reduces the uncertainty that often comes with removing and reinstalling a scope. Dentler offers steel ring variants for common tube diameters and several mounting heights, so the system can be matched to different riflescopes and rifle configurations. The emphasis is not on unnecessary complexity, but on a robust steel interface, modular interchangeability and dependable return-to-zero behavior for hunting rifles.

About the Dentler Pair of Steel Rings, 36 mm

The Dentler Pair of Steel Rings, 36 mm is a specialized upper mounting component for attaching a 36 mm scope body within the Dentler modular ecosystem. Its role is straightforward but important: it provides the clamping interface between the optic and a compatible mounting rail, so the scope can be installed securely while preserving the practical advantages of the BASIS system. For rifles set up for hunting optics, that means a solid mechanical connection without giving up the option to remove and refit the optic in a controlled, repeatable way.

The use of steel is especially relevant here. In ring mounts, material stiffness and machining accuracy directly affect how evenly the optic is supported and how confidently the mount handles recoil and field use. A steel ring set is well suited to heavier scopes and demanding hunting setups where long-term durability matters as much as initial fit. The KR 0.0 mm configuration keeps the geometry neutral, which is useful when the rifle and optic already line up correctly and no additional extension is needed to achieve proper eye position.

Compatibility is another practical strength. These rings are intended for Ø 8 mm interface systems from Dentler and several other established makers, including Henneberger, MAK, Kozap, Mauser and Recknagel. That broadens their usefulness when integrating a 36 mm optic into an existing mounting setup. Finished in matte black, the rings also match the subdued, non-reflective appearance expected on modern hunting rifle mounts.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company focuses on modular riflescope mounting systems for hunting firearms, with its best-known platforms being BASIS and BASIS VARIO. Dentler’s approach centers on separating the firearm-specific base from the optic-specific upper assembly, allowing the same optic concept to be adapted across different rifles and sight formats.

That specialization has made Dentler particularly relevant to hunters who want repeatable optic changes without resorting to improvised solutions. The company offers mounting options for a wide range of optics, including Aimpoint, Pulsar, Swarovski, Zeiss and Weaver/Picatinny formats, and lists base compatibility for rifles from makers such as Benelli, Browning, Merkel, Heckler & Koch and Rößler. The result is a product range built around precise fit, modularity and practical field use rather than one-piece universal mounts.

Main Features

• Manufacturer: Dentler
• Series: Dentler Steel Rings
• Made in: Germany
• Warranty: 30 years
• Material: Steel
• Extension (KR): KR 0.0 mm
• Scope / sight type: 36 mm
• Color: Black - Matte
• Compatibility above: 36 mm
• Compatibility below: Henneberger Ø 8 mm Interface, MAK Ø 8 mm Interface, Kozap Ø 8 mm Interface, Mauser Ø 8 mm Interface, Recknagel Ø 8 mm Interface, Dentler Ø 8 mm Interface

Warranty

Dentler provides a 30-year warranty for this mount. That long coverage period matches the product’s role as a durable steel component within a modular riflescope mounting system.