BKL 1 Inch Long Tri-Mount Dovetail Riser Mount, 1P

• Tri-Mount layout: The raised top dovetail keeps the optic higher for a more upright head position, while the side dovetails add space for lights, lasers or other rail-mounted accessories without replacing the original base.
• Auto-centering clamp design: BKL’s self-aligning clamping system helps the riser seat evenly on 3/8-inch and 11 mm dovetail rails, which supports consistent fit and reduces the need for trial-and-error alignment.
• Compact 1 inch length: The short body adds mounting height and accessory interfaces without taking up unnecessary rail space, which is useful on rimfire rifles and airguns with limited dovetail length.
• Aluminium construction: The mount keeps weight down while providing the rigidity needed for scope and accessory support, making it a practical choice for field rifles and target setups alike.
• 0 MOA configuration: With no built-in incline, the riser preserves the rifle’s existing sighting geometry and suits general-purpose optic mounting where extra elevation cant is not required.

About the BKL Riser Mounts Series

BKL Riser Mounts are built for shooters who need more mounting height on a dovetail-equipped rifle without changing to a different rail standard. Introduced as part of BKL’s dovetail riser line, the series is aimed primarily at airguns and rimfire rifles, where 3/8-inch and 11 mm rails remain common and where compact, clean mounting solutions are often preferred. A defining feature of the series is BKL’s Tri-Mount configuration, which raises the top dovetail while also adding side-facing dovetail interfaces for accessories such as lights and lasers.

Within the lineup, the 100-series risers are designed around practical compatibility and straightforward installation. They use BKL Auto-Centering technology, a clamping concept intended to self-align as the mount is tightened, helping the riser sit squarely on the rail. The series is offered in several lengths to suit different rail spaces and accessory needs, while keeping the same basic purpose: to create a higher optic position and more usable mounting surfaces on rifles that start with a simple dovetail. That makes the series especially relevant for target shooters, small-bore users and airgun owners refining cheek position, scope clearance and accessory placement.

About the BKL 1 Inch Long Tri-Mount Dovetail Riser Mount, 1P

The BKL 1 Inch Long Tri-Mount Dovetail Riser Mount, 1P is a compact riser for shooters who need extra optic height on a dovetail-equipped rifle but do not want to give up rail space to a longer base. Its 25.00 mm body length makes it well suited to airguns and rimfire rifles with short receiver rails, while the raised profile helps position the optic higher above the action for a more natural head position. In practice, that can make a noticeable difference on rifles where the original rail sits low and the shooter would otherwise need to compress the neck to achieve a full sight picture.

What sets this model apart is the Tri-Mount design. In addition to the top dovetail used for the optic setup, it provides side dovetail mounting points that can carry accessories without forcing a change to the rifle’s main mounting arrangement. That is particularly useful on compact target or hunting setups where available rail space is limited. The aluminium construction keeps the mount light and practical, while the 0 MOA layout maintains a neutral mounting angle for general-purpose use. BKL’s auto-centering clamp concept is especially relevant on 3/8-inch and 11 mm rails, where consistent seating matters for secure installation. For shooters building a tidy, elevated dovetail setup on platforms such as Anschutz, CZ and similar rimfire or airgun actions, this single riser offers added height and added versatility in a very small footprint.

About BKL Technologies

BKL Technologies originated in Brownsville, Texas, in 1998 and focuses on mounting systems for airguns and rimfire rifles. The company’s product range includes scope mounts, rings, adapters, risers and scope levels, with an emphasis on dovetail-based platforms that remain common in these categories. BKL manufactures its products in Texas and builds them from aircraft-grade aluminum alloy, reflecting a design approach centered on low weight, repeatable fit and practical durability.

A key part of the company’s identity is its patented auto-centering clamping system, developed to self-align as the mount is tightened. That feature has made BKL particularly well known among shooters using 11 mm and 3/8-inch dovetail rails, where secure and even clamping is important. Since its acquisition by Auto-Numatic Corp. in 2008 and the move to Fort Worth, BKL has remained closely associated with specialized American-made mounting solutions for rimfire and airgun applications.

Main Features

• Manufacturer: BKL Technologies
• Series: BKL Riser Mounts
• Made in: USA
• Material: Aluminium
• Length: 25.00 mm
• Base height: 4.00 mm
• Inclination: 0 MOA
• Compatibility: Accuracy International AW, Anschutz 54, Anschutz 64, Anschutz 1761, Anschutz 1770, Anschutz 54.30, Anschutz 1727 F, Anschutz 1827 F, CZ 452 (11 mm), CZ 452 (3/8"), CZ 453 (11 mm), CZ 511, CZ 512, CZ 513, CZ 455, CZ 457, Erma Werke M1, FN Browning T-Bolt (with dovetail), Grünig + Elmiger Supertarget 200, Keppeler Sporting Rifles, Kettner Luger Rimfire, Kimber 82 (Dovetail), Kimber 84, Krico 300, Krico 400

Warranty

BKL Technologies provides a 2-year warranty for this riser mount. That period suits a precision-machined mounting accessory intended for regular use on rimfire rifles and airguns.

In the Box

• Single Tri-Mount dovetail riser mount
• Mounting wrench