Skip to content

Burris MSR RifleScope Instruction Manual

Products:

Congratulations on purchasing a Burris® MSR™ riflescope! The perfect match for your modern sporting rifle,the MSR is an easy-to-use,rugged riflescope with a trajectory compensating reticle calibrated for the most popular tactical cartridges. Backed by the legendary Burris Forever Warranty, you will enjoy the following features of your MSR riflescope:
Field Proven Reticle Technology. The Ballistic Plex™ reticle is one of the most simple, effective, and elegant trajectory compensating reticles on the market.
Low Profile Adjustment Knobs.The fingeradjustable, low profile adjustment knobs create a sleek profile. Turret indications always reflect a change in the point of impact,resulting in pinpoint accuracy.
High Performance Glass. Provides excellent brightness and clarity with lasting durability – exactly what you expect from Burris.
Hi-Lume® Multi-Coated Lenses. Enhanced low-light performance and glare elimination, making more shots possible and increasing your success rate

How To Use Your MSR Riflescope

Eyepiece Focusing

The eyepiece can be focused so that the reticle appearssharp and black to your eyes.Follow this procedure to quickly adjust the focus:
1. Point the scope at the sky or a plain wall and take a quick glance through the scope. If the reticle appears sharp and black, no further adjustment is necessary.
2. If the reticle does not appear sharp and black, take quick glances through the scope while rotating the focus ring until the reticle pattern is sharp and black.
NOTE: Do not look through the eyepiece as you turn the focus ring.Your eyes will adjust to the out-of-focus condition.

Windage/Elevation Adjustment

The low profile adjustments knobs feature a finger adjustment for both windage and elevation.Once you have successfully zeroed your scope, you can reset the zero on your dials with these simple steps:
1) With turret caps removed, grip scope firmly and hold knob in place.
2) Put pen or other small object into the small hole located on the dial.
3) Keeping firm grip on the knob, use the pen to turn the dial back to zero, lining up the number zero with the white indicator dot.Only the numbered dial should move – do not allow the entire knob to move or else you will alter your windage and elevation zero settings.

Burris MSR RifleScope Instruction Manual
Burris MSR RifleScope Instruction Manual

NOTE: You do not have to reset the zero on your dials for your scope to function properly.Doing so can give you peace of mind that your zero is set,plus you can easily confirm if it has moved at
any time,but this step is optional.

Parallax/Focus Adjustment

– Not available on all models –

Parallax is the apparent movement of the reticle in relation to the target when the eye is not directly in line behind the center of the scope. Images from different distances focus in front of or behind the scope’s reticle. Parallax is more noticeable with higher magnification scopes. Parallax is adjusted by rotating the parallax adjustment ring located on the objective bell. When the scope is set parallax-free for the
distance you are viewing, you should be able to move your head side-to-side or up and down without seeing the reticle move appreciably in relation to the target.

Mounting the Scope

We recommend high-quality rings and bases, like the Burris Xtreme Tactical Rings and Xtreme Tactical Bases.Quality components ensure that your scope will remain safely and securely mounted, and will provide the maximum accuracy.Use care when mounting your scope as damage can be caused by improper mounting.

Care & Maintenance

MSR Riflescopes are fully waterproof and fogproof. In the event that the lenses are subjected to dust, dirt or mud,follow these steps to clean and protect the lens surface. Failure to remove grit before final cleaning is sure to damage lens coatings. Coarse dirt/debris must be removed from the lens surface.The most convenient way to clean a lens surface is to use a Lens Pen. Position the scope so particles will fall away
from the lens, and then use the Lens Pen or soft brush to gently whisk away the debris while blowing on the lens to dislodge the particles. For heavy dirt, like dried mud, use a spray of clean water or lens cleaning fluid to remove the dirt. Your Burrisriflescope will provide a reliable performance given reasonable care and treatment.All moving assemblies are permanently lubricated.Only occasional cleaning of the outside of the scope and the exterior lenses is required.Never disassemble your scope. Disassembly by anyone other than our factory will void the warranty. If you have any other problems with your riflescope, please contact Burris Customer Service.

MSR Riflescope Reticles

Ballistic Plex™

The Ballistic Plex reticle is a copyrighted Burris design on the lower vertical crosshair that compensates for bullet drop.The Ballistic Plex reticle is set to provide precise aiming from 100 yards to 500 yards. Examples of the actual bullet path for many of the most popular cartridges are available for download on our website at www.burrisoptics.com.
The Ballistic Plex reticle is extremely useful regardless of the cartridge you choose to shoot. MSR models are configured for a specific load, but each ballistic line represents some exact yardage for whatever cartridge you shoot. It only takes a simple trip to a long-distance shooting range to make your own yardage chart to correspond to each ballistic line for your cartridge.

Burris MSR RifleScope Instruction Manual
Burris MSR RifleScope Instruction Manual
Burris MSR RifleScope Instruction Manual
Burris MSR RifleScope Instruction Manual

Simple to Use

1. Sight-in exactly at 50, 75,100, or 200 yards depending on your cartridge and bullet selection.
2. Set your scope to the highest magnification.
3.Determine the bullet path of your cartridge at the climatic conditions you will be shooting.We highly recommend actual firing at each distance increment for best accuracy. Record the results of your rifle/cartridge combination for future reference.
4.Determine the distance to your target and select the corresponding ballistic line. Slight holdover or under may be necessary to handle in-between yardages.

Practice Makes Perfect

The Ballistic Plex is much more accurate than guessing holdover and faster and more reassuring to most shooters than using target-type adjustments.The nature of ballistics is such that everything is theoretical and if any one of the variables change (altitude, temperature,barometric pressure, humidity, bullet design,barrel length, chamber fit,seating depth, etc.) so does the ballistic performance. For maximum accuracy,practice at long ranges under similar conditions to those which you will experience in the field.

Ballistic Plex™

The Ballistic Plex is the most simple, effective, and elegant trajectory-compensating reticle. It’s quick and easy to use, and can be matched to any caliber or bullet weight for long-range accuracy.

Burris MSR RifleScope Instruction Manual
Burris MSR RifleScope Instruction Manual

Technical Tip

For maximum accuracy at long ranges,sight in at a longer range such as 400 yards using the 400-yard ballistic line.This will decrease the amount of long-range error that can occur under various environmental conditions.

Shoot Responsibly

Long-range shooting is extremely challenging and can be very rewarding.But along with it comes tremendous responsibility, especially when hunting.To ensure you take ethical shots at longer ranges, it is essential to know the yardage to an animal and your wind conditions. For these reasons,we strongly encourage that you practice to determine your own shooting capabilities and do not shoot beyond them in the field.

SHARE THIS POST

YOU MIGHT ALSO LIKE

Leave a Reply

Your email address will not be published. Required fields are marked *