BKL 0.6" Offset Dovetail Ring - Single, 25.4 mm

• Offset design for extra eye relief latitude: The 0.6" offset layout shifts scope placement forward or rearward where receiver rail space is limited, helping solve fitment issues on compact airguns and rimfire rifles.
• Single-ring format for custom setups: Supplied as one ring, this model lets shooters pair different ring positions to suit unusual rail lengths, bolt clearance needs, or non-standard scope mounting points.
• Auto-centering clamp system: BKL’s self-aligning clamping design keeps the ring centered on 11 mm and 3/8" dovetail rails as it is tightened, which supports even scope alignment and secure mounting.
• Aluminium construction: The aluminium body keeps weight down while providing the rigidity needed for airgun and rimfire use, making it a practical choice for rifles that benefit from a lighter optic setup.
• Made for 1 inch scope tubes: Built for 25.4 mm (1") optics, this ring fits a wide range of traditional rimfire and airgun riflescopes while maintaining a compact footprint on the rail.

About the BKL 1 Inch Mounts Series

BKL 1 Inch Mounts are the manufacturer’s 200 Series, developed for 1-inch scope tubes used on standard 3/8-inch rimfire and 11 mm airgun dovetail rails. The series is aimed at shooters who need a mounting system tailored to the dimensions commonly found on rimfire rifles and airguns rather than Weaver or Picatinny platforms. A defining feature across the range is BKL’s patented auto-centering clamping system, which moves the clamping legs equally as the screws are tightened so the mount stays centered on the rail.

The series is made from aircraft-grade aluminum alloy and includes a broad mix of configurations for different rifles and scope positions. Within the family are unitized mounts, separate rings, offset versions, high models, and drop-compensated options, along with single-strap and double-strap layouts. BKL also uses a clamp-spreading feature that allows screws to be moved to separate holes to open the clamp for installation on dovetail rails. In practice, that gives the series a reputation for fitting the rail formats most often seen on sporting airguns and rimfire rifles while offering enough variation to solve eye relief, clearance, and positioning problems without adding unnecessary bulk.

About the BKL 0.6" Offset Dovetail Ring - Single, 25.4 mm

The BKL 0.6" Offset Dovetail Ring - Single, 25.4 mm is a purpose-built mounting solution for rifles that do not offer much usable dovetail length or place the action and bolt in a way that limits normal scope positioning. Its offset ring design is intended to increase eye relief adjustment, which is especially useful when fitting a scope to compact rimfire receivers or airgun actions where a conventional straight ring may leave the ocular lens too close or too far from the shooter’s eye.

Because this is a single 1 inch ring, it is particularly useful in custom or corrective mounting arrangements. It can be paired with another ring to create a mixed-position setup, helping the shooter place the scope exactly where the rifle’s rail geometry demands. That flexibility matters on older rimfires, target rifles, and airguns with short or interrupted dovetail sections, where standard ring spacing is often not ideal.

The ring is made from aluminium and uses BKL’s auto-centering clamping system, a design intended to keep the mount aligned on 11 mm and 3/8" dovetail rails as the screws are tightened. In practical terms, that supports a more even grip on the rail and reduces the chance of the ring pulling to one side during installation. With 0 MOA inclination, the ring maintains a neutral mounting angle, making it suitable for general sporting and target setups where the goal is secure, straightforward scope placement rather than built-in elevation bias.

About BKL Technologies

BKL Technologies originated in Brownsville, Texas, in 1998 and focuses on scope-mounting systems for airguns and rimfire rifles. Its product range includes scope mounts, rings, dovetail adapters, risers, and scope levels, with an emphasis on the rail formats commonly found on 11 mm and 3/8-inch dovetail-equipped rifles. A key part of the brand’s identity is its patented auto-centering clamping system, designed to self-align as the mount is tightened.

BKL manufactures its mounts and adapters from aircraft-grade aluminum alloy, and production is based in Texas, United States. In December 2008, Auto-Numatic Corp. acquired BKL Technologies and moved operations to Fort Worth, Texas. Within the airgun and rimfire segment, BKL is known for solving mounting problems on rifles that use narrow dovetail rails rather than more common centerfire-style bases.

Main Features

• Manufacturer: BKL Technologies
• Series: BKL 1 Inch Mounts
• Made in: USA
• Warranty: 2 years
• Material: Aluminium
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: No
• Optic / sight tube diameter: 25.4 mm - 1"

Warranty

BKL Technologies provides a 2-year warranty for this mount. That stated warranty period suits a precision-machined accessory intended for regular airgun and rimfire use, covering the product for a clearly defined term rather than an open-ended policy.

In the Box

• Single offset dovetail ring