INNOmount Guide TS450 Pivot Mount, Winchester 70 .223WSSM

• Pivot design for repeatable removal: The INNOmount Guide TS450 Pivot Mount is built for shooters who want to remove and reinstall an optic without giving up the practical advantages of a swing mount. That makes transport, storage and rifle handling easier while keeping the setup consistent.
• Guide TS interface: This version is made for the Guide TS mounting standard, giving the optic a dedicated mechanical fit instead of relying on improvised adapters. The result is a cleaner installation and more secure alignment on the rifle.
• Adjustable windage: With windage adjustment built into the mount, the setup can be centered more precisely during installation. This helps preserve the optic’s internal adjustment range for actual zeroing and fine correction.
• 28.00 mm build height: The 28.00 mm height provides the clearance needed for the intended optic interface while keeping the sight line controlled. In practice, that supports a stable cheek weld and more natural head position behind the rifle.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity expected from a rifle mount. For field use, that means less unnecessary bulk on the rifle and dependable day-to-day handling.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the brand’s swing-mount category and are intended for shooters who want a detachable mounting system with a traditional pivoting layout. The series is designed for day-vision optics and scopes, covering both conventional riflescope configurations and dedicated optic interfaces for specific sight bodies. Across the range, the mount body is made from high-strength aluminum, which keeps the system practical for hunting rifles while maintaining the stiffness needed for secure optic support.

The series is offered with different locking concepts, including a lever lock for a 15 mm prism and an EAW pivot-bolt lock, so the user can match the mount to the preferred base system and rifle setup. INNOmount also offers a broad selection of upper interfaces within the same family, including ring versions as well as dedicated solutions for Swarovski SR and Zeiss ZM/VM rails. That variety makes the series especially relevant for shooters who move between different rifles, optic footprints or mounting standards but still want the familiar handling of a pivot mount.

About the INNOmount Guide TS450 Pivot Mount, Winchester 70 .223WSSM

The INNOmount Guide TS450 Pivot Mount, Winchester 70 .223WSSM is a one-piece pivot mount configured for a Guide TS optic interface and for rifles using the Winchester 70 .223WSSM pattern within the compatible pivot-base system. Its purpose is straightforward: to give a dedicated thermal-optic mounting solution that matches the rifle platform and the optic footprint without adding unnecessary complexity. For users running a Guide TS unit, that dedicated fit matters because it simplifies installation and helps maintain a more secure, better-centered setup.

The mount uses an aluminium construction and a 28.00 mm build height, balancing structural rigidity with manageable weight. In practical use, that helps keep the rifle from becoming overly top-heavy while still providing the clearance and alignment needed for the optic. The 0 MOA inclination keeps the mount neutral, which suits general-purpose zeroing rather than pushing the optic into a pre-angled long-range configuration. This is a sensible choice for a thermal or specialist sight setup where straightforward alignment is often more important than added elevation bias.

A particularly useful feature is the adjustable windage. By allowing lateral correction at the mount, the system can be aligned more precisely to the rifle and base combination before relying on the optic’s own adjustment range. That can make zeroing more efficient and helps preserve internal correction for fine tuning. Finished in black and built in Germany, this INNOmount pivot mount is aimed at shooters who want a detachable, rifle-specific mounting solution with a clean mechanical fit and practical field handling.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG. The company is based in Fuchsstadt, Germany, where it manufactures hunting rifles, riflescope mounts and red-dot sights. Within that broader product range, INNOmount focuses on mounting solutions for sporting and hunting rifles, with both quick-clamping and fixed mounts in the lineup.

The brand’s range covers interfaces for Weaver/Picatinny rails as well as numerous rifle-specific mounting bases, which makes it relevant to shooters working with both modern rail-equipped rifles and more specialized receiver patterns. INNOmount also offers tactical, swing and tilt-up mounts, along with scope rings in sizes including 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth shows a clear specialization in the mechanical side of optic integration: matching different rifles, optics and mounting standards with dedicated hardware rather than one-size-fits-all solutions.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Height BH.: 28.00 mm
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Adjustable windage: Yes
• Optic type: Guide TS
• Color: Black
• Compatibility above: Guide Bottom Mounting Standard
• Compatibility below: Recknagel Pivot Mount Bases on Winchester M70 WSSM
• Compatibility below: Henneberger Pivot Mount Bases on Winchester M70 WSSM
• Compatibility below: MAK Pivot Mount Bases on Winchester M70 WSSM

Warranty

INNOmount provides a 2-year warranty for this mount. That period suits a precision mounting component intended for regular field use and repeated installation within a compatible pivot-base system.