INNOmount Fixed Variable Mount for Sako, Pulsar

• Fixed one-piece construction: The mount forms a solid connection between rifle and optic, which suits hunters and shooters who want a stable setup that stays in place until deliberately removed with tools.
• Made for Pulsar Apex, Trail and Digisight: This interface is tailored to compatible Pulsar optics, giving a clean and secure fit instead of relying on adapters that can add height or complexity.
• 20.00 mm build height: The moderate mounting height helps position the optic at a practical level above the action, supporting a consistent cheek weld and more natural head position behind the sight.
• 0 MOA alignment: With no built-in inclination, this mount is well suited to general hunting and observation setups where a straightforward optical line is preferred over long-range elevation bias.
• Germany-made aluminum mount system: INNOmount’s lightweight mounting approach keeps unnecessary bulk down while still providing the rigidity needed for regular field use on Sako rifles.

About the INNOmount One-Piece Fixed Mounts Series

INNOmount One-Piece Fixed Mounts sit alongside the brand’s quick-clamping designs as a more permanent mounting option for shooters who prefer a tool-secured installation. In this series, the mount is attached to the rifle with clamping screws tightened by torque wrench, creating a firm connection that is not intended to be loosened without tools. That makes the series a practical fit for rifles that carry one optic full time, especially in hunting use where reliability and repeatable positioning matter more than rapid optic changes.

The series reflects INNOmount’s broader approach to mounts as lightweight aluminum solutions for day optics, thermal imaging and digital optics. One-piece fixed models are offered across several rifle-specific bases and optical interfaces, which allows the same design philosophy to cover conventional scopes as well as devices from brands such as Pulsar. A further strength of the series is its modular thinking: fixed mounts can be upgraded to the ZERO quick-detach system, so users who later want more flexibility are not locked out of that path. In practice, the series is defined by low-profile construction, brand-specific fit and a straightforward mechanical layout.

About the INNOmount Fixed Variable Mount for Sako, Pulsar

The INNOmount Fixed Variable Mount for Sako, Pulsar is a rifle-specific one-piece mount built for pairing compatible Pulsar Apex, Trail and Digisight optics with a wide range of Sako actions. Its purpose is simple: provide a direct, stable interface between rifle and digital or thermal sight without adding unnecessary complication. For users running a dedicated Pulsar setup on a Sako hunting rifle, that matters because the mount is designed around both the rifle platform and the optic footprint rather than asking the shooter to combine multiple adapters.

The 20.00 mm height helps keep the optic at a practical level above the receiver, which supports a more repeatable shooting position and cleaner sight alignment in field use. With 0 MOA inclination, the mount favors a neutral setup that suits typical hunting distances and general-purpose use, especially where the goal is straightforward zeroing rather than building extra elevation into the system for long-range work. The absence of windage adjustment keeps the design mechanically simple, while the fixed format itself suits rifles that carry the same optic consistently through a season.

Compatibility is a major strength here. This model fits numerous Sako 75, Sako 85, L-series, M-series and TRG-S variants, making it relevant for owners of both newer and older Sako rifles. Finished in black and made in Germany, it follows the practical INNOmount approach: low-profile, rifle-specific and intended to hold a Pulsar optic securely in everyday hunting conditions.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of hunting and shooting equipment rather than general accessories. Within that portfolio, INNOmount focuses on mounting solutions for a wide range of rifles and optics.

The brand’s range includes quick-clamping and fixed rifle mounts, along with tactical, swing and tilt-up designs. INNOmount also covers multiple interface standards, from Weaver/Picatinny and rifle-specific bases to ring sizes such as 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth is important in practice because it shows a clear specialization in matching optics to different rifle platforms, including conventional scopes, red dots and digital or thermal devices.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Fixed Mounts
• Made in: Germany
• Mount type: One-piece fixed mount
• Build height: 20.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: No
• Optic / sight type: Pulsar Apex, Trail, Digisight
• Color: Black
• Compatible rifles: Sako 75 I, Sako 75 III, Sako 75 IV, Sako 75 SM, Sako 75 V, Sako 85 L, Sako 85 M, Sako 85 S, Sako 85 SM, Sako 85 XL, Sako 85 XS, Sako L461 Vixen, Sako L579 Forester, Sako L61R Finnbear, Sako L691, Sako M591, Sako MA 05 L, Sako MA 05 M, Sako MA 05 S, Sako MA 05 SM, Sako MA 05 XS, Sako S491, Sako TRG-S M995, Sako TRG-S M995 Magnum, Sako VL63 Finnwolf

Warranty

INNOmount states a 10-year warranty for mounts. For this fixed Sako-to-Pulsar mount, that gives long-term cover on a component that is central to retaining a secure rifle-and-optic connection.