EAW SEM Rear Foot Base
In stock

EAW SEM Rear Foot Base

As low as: CHF 19.42
Dispatch time
Ships in 1-3 days
Return time
15 days

Products currently in stock

Status
SKU
Admin Ready
Configurator Ready
Price
Buy
1 2 3 4 6

Shipping Assistant

Choose your delivery destination & delivery service

Your selected location will be saved as you browse other products. A variety of payment options will be available for you to choose from during checkout.

Need help

Our dedicated team is ready to assist you with any issues before, during, or after your purchase. If you have any questions, please feel free to reach out:
Contact Us

EAW SEM Rear Foot Base Product description

  • Steel construction: The steel body gives the rear foot base the rigidity needed for a stable scope mounting interface and dependable long-term fit under recoil.
  • Part of the EAW SEM system: As a rear foot base for the SEM pivot mount system, it supports the repeatable attachment and removal that makes traditional hunting rifle setups practical in the field.
  • 0 MOA inclination: The neutral base geometry keeps the mounting setup straightforward, making it suitable for standard sighting arrangements without built-in cant.
  • Height-specific fit concept: EAW rear foot sub-bases are used to fine-tune the vertical fit of the mount, which helps achieve proper alignment between the front and rear mounting elements.
  • Made in Germany: German manufacture reflects EAW’s long-standing focus on precision mount production, where close tolerances matter for secure lock-up and consistent point of impact.

About the SEM Series

EAW SEM mounts are the company’s classic pivot-mount system, developed for hunters and rifle owners who want a removable riflescope setup without giving up repeatability. Within EAW’s lineup, the SEM family sits as a traditional steel mounting solution that combines a low-profile appearance with the practical advantage of taking the optic off the rifle and returning it when needed.

A defining feature of the series is its front-and-rear foot architecture, which allows the mount to lock into place securely while still being tuned to the rifle. EAW designed the system so that fit at the front and rear can be adjusted, and the rear foot sub-base can be exchanged in height steps to refine vertical alignment. In practice, that matters because proper alignment helps the scope sit without unnecessary stress and supports consistent return to zero after repeated removal and reinstallation.

The SEM series is therefore well suited to traditional hunting rifles, interchangeable optics setups, and users who value steel construction, mechanical precision, and a mounting system with a long-established place in European sporting optics.

About the EAW SEM Rear Foot Base

The EAW SEM Rear Foot Base is a small but important part of the SEM pivot-mount interface. It forms the rear support point of the mounting system and helps determine how the upper mount assembly sits in relation to the rifle. In a pivot mount, that rear contact area is critical because it contributes to lock-up, alignment, and the repeatability expected from a detachable scope mount.

This version is made from steel, which is a sensible material choice for a load-bearing mount component. Steel resists wear at the contact surfaces and helps maintain dimensional stability over long use, especially on rifles that see regular field handling or repeated optic changes. The 0 MOA inclination keeps the setup neutral, making it appropriate where no built-in elevation cant is required.

Within the SEM system, rear foot bases are also part of the vertical fitting concept. EAW uses interchangeable rear-foot elements in different heights so the mount can be matched correctly to the rifle and front foot geometry. That practical adjustability is one of the reasons SEM mounts remain relevant for hunting optics: the system is not only removable, but also designed to achieve a precise mechanical fit. For the shooter, that means a cleaner installation basis and better conditions for consistent point of impact when the optic is mounted and removed as intended.

About EAW

Ernst Apel founded the company in Würzburg, Germany, in 1919, and riflescope mount development and production have been its primary focus since 1951. That long specialization explains why EAW is closely associated with mechanical mounting solutions for sporting and hunting rifles rather than general shooting accessories.

The company developed its first riflescope mounts in 1945 and went on to build a range that includes pivot, slide-on or roll-off, and claw mounts for riflescopes. EAW later moved production from Würzburg to Gerbrunn in 1970, and Ernst Apel GmbH is now headquartered in Eibelstadt, Germany. Across its mount lines, the brand is known for steel construction, model-specific fit, and traditional German mount design adapted to practical field use.

Main Features

  • Manufacturer: EAW
  • Made in: Germany
  • Material: Steel
  • Inclination: 0 MOA

Warranty

10 years. EAW states a ten-year warranty for this mount base, providing defined long-term coverage for manufacturing and material defects.

General properties

Manufacturer EAW
Made in Germany
Warranty 10 years
SKU 304270c

Physical properties

Scope / Sight type -
Material Steel
Inclination 0 MOA

Most common questions (Q&A)

Need help? Not sure about something? Don't hesitate - ask our community! Our experienced community is here to help you with this question.

Why Choose Optics Trade?

  • Worldwide shipping
  • Team of experts & enthusiasts
  • Customer satisfaction is top priority

Reviews & Testimonials

No reviews
Do you have any experience with this product?
We would love to hear your opinion by rating it:
Write a review

Community uploads

First-hand experience is priceless, therefore we always want to know how others use the product we're interested in. Feel free to contribute with your own photos or videos!

Filter by:
Sort by: