EAW pivot mount, LM rail, Heym SR 40

• Repeatable return to zero: The EAW Pivot Mount is built so the optic can be removed and reattached without shifting point of impact, which is valuable when a rifle is used with more than one sighting setup.
• LM rail top interface: The LM rail version provides a secure, precisely aligned connection for compatible rail-mounted optics, helping maintain consistent positioning on the rifle.
• Steel construction: A steel mount body gives the system the rigidity needed for long-term use on hunting rifles, with the strength to handle repeated mounting cycles.
• Rifle-specific lower fit: This version is made for the Heym SR 40, giving the mount the correct geometry for a clean fit and dependable function on that action.
• Made in Germany: German manufacture and EAW’s long specialization in scope mounts make this mount a strong choice for shooters who value precise machining and established mounting design.

About the EAW Pivot Mounts Series

EAW Pivot Mounts are the company’s classic quick-detachable mounting system and remain one of the best-known products in the EAW lineup. EAW states that it developed and launched this design more than 50 years ago, and the concept is still centered on a practical advantage: the riflescope can be removed and fitted again without changing point of impact. That makes the series especially useful for hunters and rifle owners who alternate between a day optic, a second scope, or another aiming device.

The series is designed for common rifles and long guns and uses an adjustable fit at the front and rear mount feet to fine-tune the installation. EAW also offers a lever-operated variant for break-action firearms, while the standard pivot system remains the familiar choice for many bolt-action hunting rifles. Across the range, the design philosophy is straightforward: a robust steel-based mounting solution with repeatable positioning, low mounting height where possible, and rifle-specific lower parts combined with different upper interfaces to suit rings or rail-mounted optics.

About the EAW pivot mount, LM rail, Heym SR 40

The EAW pivot mount, LM rail, Heym SR 40 is a rifle-specific quick-detachable mount intended for shooters who want the flexibility of a removable optic without giving up consistency. Built for the Heym SR 40 and configured with an LM rail top interface, it suits rail-equipped optics while keeping the mounting concept simple and repeatable. In practice, that means the scope can be taken off for transport, storage, or a change of sighting setup, then reinstalled with the confidence that the rifle’s zero remains consistent when the mount is correctly fitted.

The use of steel construction is important here because a pivot mount depends on precise engagement surfaces and long-term dimensional stability. That rigidity helps the mount resist wear from repeated opening and closing, while also supporting the optic securely under field use. As part of the EAW pivot system, this model follows the same idea that has made the design popular on hunting rifles for decades: a solid rifle-specific lower section combined with a practical detachable upper arrangement.

For a Heym SR 40 owner using a rail-mounted riflescope, this mount is a sensible solution where repeatability matters as much as convenience. It is particularly well suited to rifles that may be used with more than one optical setup, or where the optic needs to be removed regularly without turning the rifle into a permanent workshop job each time.

About EAW

EAW traces its origins to 1919, when Ernst Apel founded the company in Würzburg, Germany. The business later adopted the EAW name after Ernst Apel acquired Elektro-Dental-Werke Frankfurt in 1923 and changed the EDW brand to EAW, meaning Ernst Apel Würzburg. The company developed its first riflescope mounts in 1945, and since 1951 mount development and production have been its primary focus.

That long specialization explains why EAW is closely associated with traditional German scope-mount engineering. The company produces pivot, slide-on or roll-off, and claw mounts for riflescopes, and it has also expanded into thermal imaging cameras and tactical mount solutions. Production moved from Würzburg to Gerbrunn in 1970, and Ernst Apel GmbH is now headquartered in Eibelstadt, Germany. For mount products such as this one, EAW’s reputation rests on rifle-specific fit, durable materials, and repeatable detachable mounting systems.

Main Features

• Manufacturer: EAW
• Mount series: EAW Pivot Mounts
• Made in: Germany
• Material: Steel
• Scope / Sight type: LM Rail
• Compatibility above: LM Rail
• Compatibility below: Carl Gustaf 2000 SA, Carl Gustaf 2000 LA, Carl Gustaf 3000, Carl Gustaf 4000, FN Browning A-Bolt SA, FN Browning A-Bolt LA, FN Browning Eurobolt SA, FN Browning Eurobolt LA, FN Browning A-Bolt II SA, FN Browning A-Bolt II LA, FN Browning A-Bolt III SA, FN Browning A-Bolt III LA, FN Browning A-Bolt Shotgun, FN Browning T-Bolt (with holes), FN Browning Fusion Evolve, FN Browning Phoenix, Kimber K-22, Kimber K-17, Kimber 84M, Kimber 84L, Krieghoff Semprio (before 2013), Remington 783 SA, Remington 783 LA, Remington 710

Warranty

EAW provides a 30-year warranty on mounts and mount parts. For this mount, that long warranty period supports its role as a durable steel mounting solution intended for repeated use over many seasons.