Hawke Vantage 1x20 Red Dot Sight

• Integrated Mount — Ready Straight from the Box: Both variants ship with a fully integrated mount requiring no additional hardware to install. The Weaver/Picatinny variant (art. no. 12102) fits directly onto standard Weaver and Picatinny rails as found on ARs, flat-top rifles, and many modern hunting platforms. The 9-11mm Dovetail variant (art. no. 12105) integrates directly onto the 9-11mm dovetail rails standard on most air rifles and rimfire rifles. In both cases the sight is ready to mount and zero immediately without sourcing a separate mount.
• 3 MOA Red Dot with 11-Stage Brightness Control: The 3 MOA dot provides a clearly visible aim point for fast close-range target acquisition on pistols, air rifles, rimfire rifles, and ARs. The 11-stage digital brightness control provides a wide range of intensity settings to match the dot to the ambient light conditions — from bright outdoor daylight through to low-light indoor use — with off positions between each step for straightforward cycling.
• Compact and Lightweight 20mm Build: The 20mm objective lens keeps the overall dimensions exceptionally compact — just 74mm in length and 120g (Weaver) or 125g (9-11mm) — making this one of the lightest red dot sights in the Hawke lineup. The small footprint is particularly well suited to target pistols, compact air rifles, and rimfire platforms where minimising added size and weight is a priority.
• Parallax-Free from 9 Metres: The sight is parallax error-free from 9 metres to infinity, ensuring the dot stays on the point of aim regardless of eye position behind the sight — an important characteristic for reactive shooting where there is no time to precisely centre the eye before the shot. This also makes the sight practical for close-range airgun and rimfire use where targets may be at short distances.
• 25-Layer Multi-Coated Optics with Sealed Aluminium Construction: The 25-layer multi-coated 20mm lens maximises light transmission and minimises internal reflections for a clear, undistorted sight picture. The high-quality aluminium housing is nitrogen purged, waterproof, fogproof, and shockproof, ensuring reliable performance in wet field conditions and on hard-recoiling platforms across the intended range of applications.

About the Vantage Red Dot Series

The Hawke Vantage Red Dot series is Hawke's entry-level enclosed red dot sight range, built on the H2 optical system and designed for hunters, air rifle shooters, rimfire shooters, and recreational pistol shooters who need a simple, compact, field-ready dot sight at an accessible price point. The series is characterised by its integrated mount design — each model ships with a fully integrated mount for immediate installation onto the most common rail types, eliminating the need for separate mount procurement.

All Vantage Red Dot models feature 25-layer multi-coated optics, a 3 MOA red dot, parallax-free performance from 9 metres to infinity, and waterproof, fogproof, shockproof aluminium construction. The series is available in two objective sizes — 20mm and 30mm — and two mount variants for each size, covering both Weaver/Picatinny and 9-11mm dovetail rail standards. This breadth of mount compatibility makes the Vantage Red Dot series one of the most accessible red dot options across the full spectrum of shooting platforms, from centrefire ARs and hunting rifles to air rifles and rimfire pistols. The 20mm objective configuration is the most compact and lightweight in the series, intended for applications where minimal added size and weight are a priority.

About the Model (Hawke Vantage Red Dot 1x20)

The Hawke Vantage Red Dot 1x20 is the most compact model in the Vantage Red Dot lineup, designed for target pistols, air rifles, rimfire rifles, compact ARs, and any shooting application where a lightweight, purpose-built dot sight with minimal size impact is the primary requirement. The 1× magnification allows both-eyes-open shooting for maximum situational awareness and fast target acquisition at close to medium range, with the 3 MOA red dot providing a clearly visible and fast aim point across the intended applications.

The 20mm objective lens with 25-layer multi-coated optics delivers a clear, undistorted sight window. The sight is parallax-free from 9 metres to infinity, accommodating the close-range distances typical of airgun and pistol shooting without parallax error affecting point of impact. The overall body length of 74mm and weight of 120g (Weaver) or 125g (9-11mm) are among the lowest in any enclosed dot sight, keeping the addition to total system weight and platform geometry minimal.

The scope is available in two mount variants. The Weaver/Picatinny version (art. no. 12102) integrates a low-profile Weaver/Picatinny mount for direct installation on standard rails found on ARs and modern hunting rifles. The 9-11mm Dovetail version (art. no. 12105) integrates a dovetail mount for direct installation on air rifle and rimfire platforms without an adapter. Both variants share identical optical and electronic specifications. The 11-stage digital brightness control provides precise dot intensity matching across a wide range of ambient light conditions. The 1 MOA click-value turrets allow a maximum of 160 clicks of adjustment per axis for zeroing across the range of mounting heights the integrated mounts provide. The aluminium body is nitrogen purged, waterproof, fogproof, and shockproof.

About Hawke

Hawke Optics is a British optics brand registered in England and Wales, with products distributed across Europe, North America, and international markets. The company produces a broad range of optical products including riflescopes, airgun scopes, crossbow scopes, red dot sights, binoculars, spotting scopes, and laser rangefinders, covering applications from hunting and precision shooting to nature observation and marine use.

Hawke organises its product lineup into distinct optical system tiers — from the entry-level H2 through H5 to the flagship H7 — with each tier reflecting the glass specification, coating technology, and feature level of the products within it. The Vantage series is built on the H2 system and represents the entry level of Hawke's product range, covering riflescopes, airgun scopes, red dot sights, binoculars, spotting scopes, and laser rangefinders at an accessible price point.

Main Features

• Magnification: 1×
• Objective Lens Diameter: 20 mm
• Dot Size: 3 MOA
• Illumination: 11-stage digital brightness, red only
• Click Value: 1 MOA
• Maximum Adjustment: 160 clicks per axis
• Parallax: Free from 9 m / 10 yds to ∞
• Lens Coating: Multi-Coated, 25 layers
• Mount: Integrated Weaver/Picatinny (12102) / Integrated 9-11mm Dovetail (12105)
• Body Dimensions (L × W × H): 74 × 41 × 48 mm (12102) / 74 × 47 × 48 mm (12105)
• Weight: 120 g (12102) / 125 g (12105)
• Battery: CR2032
• Construction: Nitrogen purged, waterproof, fogproof, shockproof

Warranty

The red dot sight is covered by a 2-year warranty.

In the Box

• Red Dot Sight (with integrated mount)
• Honeycomb Sunshade
• Rubber Protective Cover
• Lens Cloth
• Hex Key (12102 only)
• Multi-Tool
• CR2032 Battery
• Instruction Manual