BKL 0.6" Long Dovetail Rings, 30 mm

• Auto-Centering clamp design: BKL’s patented self-aligning clamping system moves both sides evenly as the ring is tightened, helping keep the scope centered on the dovetail and reducing mounting stress on the tube.
• 0.6" independent ring format: Separate rings give flexibility in scope placement, which is useful on airguns and rimfire rifles where turret position, loading access, or receiver length can limit mounting options.
• 30 mm scope fit: Built for 30 mm scope tubes, these rings suit modern optics with larger internal adjustment ranges and stronger erector assemblies often used for target shooting and hunting setups.
• Aircraft-grade aluminum construction: The aluminum body keeps weight down while providing the rigidity needed for a secure scope mount on dovetail-equipped rifles.
• Made for 3/8-inch and 11 mm dovetails: The design matches the rail dimensions commonly found on rimfire rifles and airguns, allowing a direct, low-complexity mounting solution without adding a separate base.

About the BKL 30 mm Mounts Series

BKL 30 mm Mounts are built around the needs of shooters using 30 mm scope tubes on 3/8-inch or 11 mm dovetail rails, a format commonly found on airguns and rimfire rifles. Within BKL’s lineup, the series covers everything from simple independent rings to offset and unitized designs, giving shooters a choice between compact mounting, added positioning flexibility, or a one-piece arrangement depending on the rifle and optic.

A defining feature of the series is BKL’s patented Auto-Centering system, which moves the clamping legs equally as the mount is tightened. In practice, that helps the rings stay centered on the rail and supports more even scope alignment. The series also uses spreader holes that let the clamping screws open the legs for installation on wider rails, which is especially useful with dovetail dimensions that vary slightly from rifle to rifle. Made in Texas from aircraft-grade aluminum alloy, the 300 Series is aimed at shooters who want a light, mechanically simple mounting system for rimfire, target, and airgun use.

About the BKL 0.6" Long Dovetail Rings, 30 mm

The BKL 0.6" Long Dovetail Rings, 30 mm are a compact pair of independent scope rings intended for rifles with a 3/8-inch or 11 mm dovetail and an optic with a 30 mm main tube. Their short 0.6" ring length makes them a practical choice when a shooter wants a clean, minimal mounting footprint while still keeping enough flexibility to position the scope correctly for eye relief and turret clearance.

Because this model uses BKL’s Auto-Centering clamping system, the rings are designed to draw in evenly on the rail as they are tightened. That matters in real use because it helps keep the mount aligned on the dovetail and can reduce the need to fight ring position during installation. For airguns and rimfire rifles, where direct-to-dovetail mounting is often preferred over adding extra bases, this gives a straightforward and mechanically tidy setup.

The rings are made from aluminium, which keeps weight under control while maintaining the stiffness needed for a secure hold. The non-adjustable windage layout also keeps the design simple, with alignment handled by the mount geometry rather than extra moving parts. For target rimfires, small-game rifles, and airgun setups using a 30 mm optic, this model focuses on secure clamping, low added bulk, and flexible ring spacing.

About BKL Technologies

BKL Technologies began in Brownsville, Texas, in 1998 and built its reputation around mounting systems for airguns and rimfire rifles. The company focuses on scope rings, mounts, dovetail adapters, risers, and scope levels, with particular emphasis on the rail formats commonly found on these rifles. A key part of BKL’s identity is its patented auto-centering clamping system, developed to help mounts self-align as they are tightened.

BKL products are made from aircraft-grade aluminum alloy, and the brand’s mounts are designed around 11 mm and 3/8-inch dovetail rails. That specialization has made the company well known among shooters who want direct-to-dovetail mounting without unnecessary complexity. In December 2008, BKL Technologies was acquired by Auto-Numatic Corp., and operations were moved to Fort Worth, Texas, where the brand continued its focus on American-made mounting solutions.

Main Features

• Manufacturer: BKL Technologies
• Series: BKL 30 mm Mounts
• Made in: USA
• Mount type: Fixed dovetail rings
• Scope tube diameter: 30 mm
• Extension (KR): KR 0.0 mm
• Windage adjustable: No
• Material: Aluminium
• Compatibility above: 30 mm
• Compatibility below: Accuracy International AW, Anschutz 54, Anschutz 64, Anschutz 1761, Anschutz 1770, Anschutz 54.30, Anschutz 1727 F, Anschutz 1827 F, CZ 452 (11 mm), CZ 452 (3/8"), CZ 453 (11 mm), CZ 511, CZ 512, CZ 513, CZ 455, CZ 457, Erma Werke M1, FN Browning T-Bolt (with dovetail), Grünig + Elmiger Supertarget 200, Keppeler Sporting Rifles, Kettner Luger Rimfire, Kimber 82 (Dovetail), Kimber 84, Krico 300

Warranty

2 years. BKL Technologies specifies a 2-year warranty for this mount.

In the Box

• Set of two BKL 0.6" Long Dovetail Rings