BKL Adjustable Scope Mount, 30 mm

• Adjustable mount design: The BKL adjustable system lets the mount adapt to alignment needs that can occur on dovetail-equipped airguns and rimfire rifles, helping keep the scope seated correctly without resorting to bulky hardware.
• Patented Auto-Centering clamp: BKL’s self-aligning clamping system moves the legs equally as the screws are tightened, which helps keep a 30 mm scope tube centered on 11 mm and 3/8-inch rails.
• Low-profile one-piece layout: This mount combines a relatively low mounting height with a 4-inch body, giving solid support for larger optics while keeping the sight line controlled for a more natural shooting position.
• Six-screw clamping length: With 2.5 inches of clamping length and six clamping screws, the mount spreads holding force over more rail contact area, which is useful on spring-piston airguns and hard-used rimfire setups.
• Aircraft-grade aluminum construction: The aluminum body keeps weight down while maintaining the rigidity needed for repeatable scope positioning on hunting optics and target rifles.

About the BKL 30 mm Mounts Series

BKL 30 mm Mounts are built around the company’s long-running approach to 30 mm scope mounting on 3/8-inch and 11 mm dovetail rails. Within BKL’s lineup, this family serves airgun and rimfire shooters who need a secure dovetail solution without moving to a Picatinny-based system. The series covers several configurations, including independent rings, offset rings, unitized mounts, and adjustable mounts, so it can support everything from compact target rifles to longer hunting optics.

A defining feature of the series is BKL’s patented Auto-Centering system, which keeps the clamping legs moving evenly as the mount is tightened. In practice, that helps the mount stay centered on rails that can vary slightly in width from one rifle to another. The series also uses aircraft-grade aluminum alloy and is manufactured in Texas, reflecting a design philosophy focused on low weight, straightforward installation, and dependable alignment. Spreader holes are part of the concept as well, allowing the clamping screws to open the legs for easier installation on wider dovetails. For shooters using 30 mm scopes on airguns or rimfire rifles, the series is aimed at practical fit, repeatable positioning, and broad rail compatibility.

About the BKL Adjustable Scope Mount, 30 mm

The BKL Adjustable Scope Mount, 30 mm is a one-piece dovetail mount intended for shooters who want the stability of a long mount body together with the flexibility of an adjustable design. It is built for 30 mm scope tubes and fits the dovetail platforms commonly found on airguns and rimfire rifles, making it a strong match for target rifles, field air rifles, and small-bore hunting setups that do not use Weaver or Picatinny rails.

What sets this model apart is the way it combines BKL’s adjustable mount concept with a compact, low-profile form. The mount uses 2.5 inches of clamping length and six clamping screws, which gives it a broad grip on the rail and helps distribute force more evenly than shorter two-screw designs. That matters on rifles that see repeated use or sharper vibration, where consistent scope position is important. BKL also describes the mount as having a lower profile than many traditional adjustable mounts, which helps keep the optic closer to the bore line for a steadier cheek weld.

The body is made from aluminium and uses BKL’s Auto-Centering clamping system, a practical advantage on 11 mm and 3/8-inch dovetails that may not be perfectly uniform. Side rails are incorporated for mounting additional accessories, adding flexibility for specialized airgun or rimfire applications. With 0 MOA inclination and no windage adjustment built into the mount itself, this model is best suited to shooters who want a stable, centered mounting platform and prefer to handle final zeroing through the riflescope.

About BKL Technologies

BKL Technologies began in Brownsville, Texas, in 1998 and focuses on scope-mounting systems for airguns and rimfire rifles. Its product range includes mounts, rings, adapters, risers, and scope levels, with a strong emphasis on dovetail-based platforms. A key part of the brand’s identity is its patented auto-centering clamping system, developed to self-align as the mount is tightened and to accommodate both 11 mm and 3/8-inch rails.

BKL manufactures its products from aircraft-grade aluminum alloy, and production is based in Texas, United States. In December 2008, Auto-Numatic Corp. acquired BKL Technologies and moved operations to Fort Worth, Texas. The brand has built its reputation around practical mounting solutions for rifles that often use dovetail rails rather than more modern tactical interfaces, which makes BKL especially relevant in the airgun, rimfire, and target-shooting segments.

Main Features

• Manufacturer: BKL Technologies
• Series: BKL 30 mm Mounts
• Made in: USA
• Mount type: Adjustable one-piece mount
• Scope / sight compatibility: 30 mm
• Rail compatibility: 11 mm and 3/8-inch dovetail rails
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: No
• Material: Aluminium

Warranty

2 years. BKL Technologies specifies this mount with a two-year warranty period.