BKL 0.6" Long Dovetail Ring, 25.4 mm

• Auto-centering clamp: BKL’s self-aligning clamping design helps the ring seat evenly on 11 mm and 3/8-inch dovetail rails, reducing the chance of side-loading the scope tube during installation.
• Independent ring format: Separate rings give more flexibility in scope positioning, which is useful on airguns and rimfire rifles with limited rail space or unusual turret placement.
• 0.6" compact ring body: The short ring length keeps the mounting setup tidy while still providing solid support for 1-inch scope tubes on lightweight rifles.
• Aircraft-grade aluminum construction: The aluminum body keeps weight down without giving up the rigidity needed for repeatable scope alignment and day-to-day field use.
• Made in the USA: Domestic manufacturing supports consistent machining and finish quality, which matters when ring fit and clamp tension need to stay uniform.

About the BKL 1 Inch Mounts Series

BKL 1 Inch Mounts are the company’s 200 Series, built for 1-inch scope tubes used on standard 3/8-inch rimfire and 11 mm airgun dovetail rails. The series is aimed at shooters who need a secure mounting solution for rimfire rifles and airguns, especially where receiver dimensions and rail tolerances can vary from one platform to another. A defining feature of the range is BKL’s patented auto-centering system, which moves the clamping legs equally as the screws are tightened so the mount stays centered on the rail.

The series also uses a practical clamp-spreading arrangement that helps with installation on dovetail rails, making these mounts easier to fit without forcing the base into place. Within the line, BKL offers separate rings, cantilever mounts, unitized mounts, offset versions, high variants, and drop-compensated models, so the family covers everything from simple hunting optics setups to more specialized rimfire and airgun applications. Aircraft-grade aluminum alloy is used throughout the series, keeping weight manageable while maintaining the stiffness needed for dependable scope support.

About the BKL 0.6" Long Dovetail Ring, 25.4 mm

The BKL 0.6" Long Dovetail Ring, 25.4 mm is a compact fixed ring set for shooters using a 1-inch scope tube on a rifle with an 11 mm or 3/8-inch dovetail. Its short 0.6" ring length makes it especially suitable for lightweight airgun and rimfire builds where space on the receiver is limited and a clean, low-bulk mounting layout is preferred. Because the rings are separate rather than unitized, they allow more freedom to place the optic around turret housings, saddle position, and eye relief requirements.

What sets this model apart in practice is BKL’s auto-centering clamp system. As the screws are tightened, the clamping legs move evenly, helping the rings settle squarely on the rail instead of pulling to one side. That can make installation more straightforward on dovetail-equipped rifles and helps maintain better alignment between the mount and the scope tube. The design also suits shooters who move between common rimfire and airgun platforms where dovetail dimensions may differ slightly.

The ring body is made from aluminium, which keeps the setup light while still giving the mount the rigidity needed for regular field and range use. This model is intended for users who want a straightforward fixed mount with dependable fit, minimal added bulk, and the flexibility that separate rings provide on traditional dovetail receivers.

About BKL Technologies

BKL Technologies originated in Brownsville, Texas, in 1998 and focuses on scope-mounting systems for airguns and rimfire rifles. The company’s product range includes scope mounts, rings, dovetail adapters, risers, and scope levels, with an emphasis on fitting the 11 mm and 3/8-inch dovetail rails commonly found on these platforms. In December 2008, Auto-Numatic Corp. acquired BKL Technologies and moved operations to Fort Worth, Texas.

BKL is particularly known for its patented auto-centering clamping system, designed to self-align as the mount is tightened. That design focus reflects the brand’s practical approach: mounts that install cleanly, center consistently, and suit the rail standards most often used on rimfire and airgun rifles. The company manufactures its products in Texas and uses aircraft-grade aluminum alloy across much of the lineup.

Main Features

• Manufacturer: BKL Technologies
• Series: BKL 1 Inch Mounts
• Made in: USA
• Mount type: Fixed dovetail ring set
• Scope tube compatibility: 25.4 mm - 1"
• Extension (KR): KR 0.0 mm
• Windage adjustable: No
• Material: Aluminium

Warranty

BKL Technologies provides a 2-year warranty for this mount.

In the Box

• Mount rings: one set of BKL 0.6" Long Dovetail Rings