Redding Instant Indicator .22-250 Remington

• Fast headspace comparison: The Redding Instant Indicator gives a quick way to compare fired and sized cases, helping reloaders see shoulder movement immediately and set sizing dies with less trial and error.
• Seating-depth consistency checks: It also compares bullet seating depth uniformity, which is useful when building ammunition for more repeatable chambering and more consistent downrange results.
• Cartridge-specific fit: This version is made for .22-250 Remington and also suits .22 Varminter, so measurements are matched to the case geometry used for this cartridge family.
• Useful beyond the loading bench: Redding supplies the Instant Indicator with a Range Adapter, adding flexibility for checks at the range or in the field without depending on a reloading press.
• Complete measuring setup: The package includes the key contact parts and instructions, so the tool arrives ready to support shoulder, headspace and seating-depth comparisons in one compact system.

About the Instant Indicator Series

The Redding Instant Indicator series sits in the brand’s precision equipment range and is aimed at handloaders who want a practical way to measure case and bullet uniformity without moving to a more elaborate bench setup. Rather than serving as a simple go/no-go gauge, the system is built as a comparator that helps the user track small dimensional differences between fired cases, sized cases and loaded rounds. That makes it especially relevant for reloaders tuning ammunition for bolt-action varmint rifles, precision rifles and other platforms where consistent chamber fit matters.

Across the series, the main idea is speed combined with repeatability. The Instant Indicator is designed to check shoulder bump, compare headspace-related shoulder position, and monitor bullet seating depth uniformity with one cartridge-specific setup. Redding also extends the concept with its Range Adapter, which broadens where the tool can be used and makes the system more flexible than a bench-only comparator. The result is a product family focused on reloaders who want clearer feedback when adjusting dies, sorting brass or checking loaded ammunition before heading to the range.

About the Redding Instant Indicator .22-250 Remington

The Redding Instant Indicator .22-250 Remington is tailored to one of the classic high-velocity varmint cartridges, giving reloaders a direct way to evaluate the dimensions that matter most during case preparation and load development. Because this model is matched to .22-250 Remington and .22 Varminter, it is suited to reloaders who want to compare fired brass to resized brass, confirm that the sizing die is moving the shoulder the intended amount, and keep loaded rounds more uniform from one cartridge to the next.

In practical use, the tool helps answer the questions that often come up during precision handloading: whether shoulder bump is consistent, whether brass from different rifles should be separated, and whether bullet seating depth varies enough to justify an adjustment. That makes it useful not only for refining a die setup, but also for sorting cases and checking trim-length or bullet uniformity as part of a more disciplined loading routine. The included Range Adapter adds flexibility by allowing the instrument to be used away from the press, which is helpful when checking ammunition at the range after a load change or before another round of adjustments.

Built from steel, this Instant Indicator fits naturally into a serious case-preparation workflow. Its value is not in adding complexity, but in making dimensional changes easier to see and compare, so the reloader can make more informed adjustments with less guesswork.

About Redding

Redding Reloading Equipment was founded by Burr Bement in 1946 in Virgil, New York. The company focuses on tools and equipment for handloading ammunition, with a product range that includes reloading dies, presses, powder measures, scales and case-preparation tools. That long specialization has made Redding closely associated with reloaders who want precise control over cartridge dimensions and loading consistency.

Redding was incorporated as Redding-Hunter, Inc. in 1956, and in the 1960s it began marketing products under the Redding Reloading Equipment name. The company later expanded through the acquisition of SAECO in 1986 and Imperial Lubricants in 2005. Today, with headquarters in Cortland, New York, Redding remains known for precision-oriented reloading products, including Type S bushing dies and Competition series dies for rifle cartridges.

Main Features

• Manufacturer: Redding
• Product type: Instant Indicator comparator
• Compatible calibers: .22-250 Remington, .22 Varminter
• Material: Steel
• Application: Case preparation
• Country of manufacture: USA

Warranty

Redding covers this product with a 2-year warranty, providing defined manufacturer support for defects in materials and workmanship during the stated period.

In the Box

• Redding Instant Indicator .22-250 Remington
• Range Adapter
• One bore diameter bushing
• Surface contactor
• Shoulder contactor
• Headspace gauge
• Instructions