INNOmount Pulsar Thermion Pivot Mount, Steyr Mod SL

• Pivot mounting system: The swing-away design lets the optic be removed and reattached in a repeatable way, which is useful for transport, maintenance, or switching between sighting setups without giving up a secure lock-up on the rifle.
• Pulsar Thermion interface: Built specifically for the Pulsar Thermion platform, this mount matches the geometry of that thermal riflescope family and provides a cleaner, more stable installation than a generic adapter solution.
• Adjustable windage: The built-in lateral adjustment helps align the optic precisely with the rifle, reducing the need to use excessive reticle correction and preserving more of the sight’s adjustment range for zeroing.
• 23.00 mm build height: This height helps position the optic at a practical level over the action, supporting a natural head position while maintaining clearance for the rifle and mount interface.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity needed for a dependable hunting or field setup that is removed and reinstalled regularly.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the brand’s swing-mount category and are built for shooters who want a detachable mounting system with a traditional pivoting lock-up. The series uses a high-strength aluminum body, balancing low weight with the stiffness needed for stable optic support on hunting rifles and similar field setups. Within the range, INNOmount offers interfaces for conventional rings as well as dedicated connections such as Swarovski SR and Zeiss ZM/VM rails, which shows that the series is designed to cover a broad mix of optic formats rather than a single scope style.

The lineup is intended for day-vision optics and scopes, and it is offered with different locking concepts depending on the rifle and base arrangement, including a lever lock for a 15 mm prism and an EAW pivot-bolt lock. That gives the series a practical role in rifle-specific mounting solutions where secure attachment, repeatable removal, and compatibility with established European mounting standards matter more than universal fit. In use, the series is aimed at hunters and rifle owners who value a clean rifle-specific installation and the ability to detach the optic without moving to a bulkier tactical rail system.

About the INNOmount Pulsar Thermion Pivot Mount, Steyr Mod SL

The INNOmount Pulsar Thermion Pivot Mount, Steyr Mod SL is a one-piece pivot mount configured specifically for Pulsar Thermion optics on compatible Steyr Mod SL base arrangements. Its dedicated interface matters because Thermion devices follow the form factor of a traditional riflescope, yet they still benefit from a mount tailored to their exact mounting geometry. In practice, that means a neater fit on the rifle and a more direct route to a stable zero than using a more generic mounting workaround.

The mount uses an aluminium construction and a 23.00 mm build height, a combination that supports a practical balance between rigidity, weight, and sight line. For a thermal riflescope setup, that is important because the rifle often carries more mass than a conventional daytime optic system, so keeping the mount efficient without sacrificing support helps preserve handling in the field. The 0 MOA inclination keeps the setup neutral, which suits straightforward zeroing for typical hunting distances and general-purpose thermal use.

A key functional detail is the adjustable windage. This allows the optic to be centered more precisely over the bore through the mount itself, which can reduce the amount of internal correction needed in the sight. That is especially useful on digital and thermal optics, where preserving adjustment range can simplify setup. Compatibility with Recknagel and Henneberger pivot mount bases for a wide range of Steyr rifles also makes this model a focused solution for users who want a detachable, rifle-specific thermal mounting system rather than a universal rail-based arrangement.

About INNOmount

INNOMOUNT is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. The company manufactures hunting rifles, rifle-scope mounts, and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of practical shooting and hunting equipment rather than general accessories. Within the INNOMOUNT range, the company offers tactical, swing, and tilt-up mounts, along with quick-clamping and fixed designs for different rifle and optic combinations.

The brand’s catalog also covers scope rings in several common diameters, including 25.4 mm, 30 mm, 34 mm, and 35 mm, and mounting solutions for Weaver/Picatinny rails as well as rifle-specific bases. That breadth is relevant here because it shows INNOmount’s focus on matching the mount to both the optic interface and the firearm platform, which is exactly what a dedicated pivot mount for a Pulsar Thermion and Steyr rifle is designed to do.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Build height: 23.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: Yes
• Optic type: Pulsar Thermion
• Color: Black
• Upper compatibility: 30 mm
• Lower compatibility: Recknagel Pivot Mount Bases on Steyr CL II L, Steyr CL II M, Steyr CL II S, Steyr SM 12 L, Steyr CL II SL, Steyr SM 12 M, Steyr SM 12 S, Steyr Mannlicher Classic L, Steyr SM 12 SL, Steyr Mannlicher Classic M, Steyr Pro Hunter L (Before 2003), Steyr Mannlicher Classic S, Steyr Pro Hunter L (After 2003), Steyr Mannlicher Classic SL, Steyr Pro Hunter M (After 2003), Steyr Pro Hunter S (After 2003), Steyr Pro Hunter S (Before 2003), Steyr Pro Hunter M (Before 2003), Steyr Pro Hunter SL (After 2003), Henneberger Pivot Mount Bases on Steyr CL II S, Steyr CL II L, Steyr CL II M, Steyr CL II SL, and Steyr SM 12 M

Warranty

INNOmount covers this mount with a 10-year warranty. That long warranty period fits the product’s role as a mechanical mounting component intended for repeated installation, removal, and regular field use.