INNOmount Guide TS450 Pivot Mount, Santa Barbara Mauser

• Pivot mounting system: The swing-away design lets the optic be removed and returned to the rifle in a controlled, repeatable way, which is especially useful when a hunting rifle alternates between different sighting setups.
• Guide TS interface: Built specifically for the Guide TS mounting standard, this one-piece mount provides a direct fit for compatible thermal optics and avoids improvised adapter combinations.
• Adjustable windage: Built-in lateral adjustment helps align the optic precisely with the rifle, making zeroing more straightforward and allowing the mount to be tuned to the individual action.
• 28.00 mm build height: The chosen height helps position the optic at a practical level above the receiver, supporting a stable cheek weld while still leaving room for the mounting geometry required by the pivot system.
• Aluminium construction: The mount keeps weight under control while still providing the rigidity needed for field use, so the rifle remains easier to carry without giving up mounting stability.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the brand’s swing-mount category and are built for shooters who want a detachable solution without giving up a rifle-specific fit. The series is intended for day-vision optics and scopes, but the available interfaces also make the platform relevant for several modern optic footprints. A key characteristic of the range is its use of a high-strength aluminum body, which keeps the mount practical on hunting rifles where balance and carry weight matter.

Within the series, INNOmount offers different locking concepts, including a lever lock for a 15 mm prism and an EAW pivot-bolt lock, allowing the mounting system to be matched to the optic interface and rifle setup. The lineup also covers a broad set of upper interfaces, from conventional rings to rail-based solutions such as Swarovski SR and Zeiss ZM/VM. That combination of rifle-specific lower parts and optic-specific upper geometry makes the series well suited to hunters and practical rifle users who need a clean, repeatable mounting arrangement rather than a universal one-size-fits-all base.

About the INNOmount Guide TS450 Pivot Mount, Santa Barbara Mauser

The INNOmount Guide TS450 Pivot Mount, Santa Barbara Mauser is a one-piece detachable mount made for pairing a Guide TS optic interface with the Santa Barbara Mauser action. Its purpose is straightforward: give a rifle-specific platform for mounting a compatible thermal sight while preserving the handling qualities expected from a classic Mauser-pattern rifle. Because the mount is tailored to both the rifle and the optic standard, it offers a neater and more mechanically coherent solution than stacking adapters between unrelated systems.

The pivot-mount layout is particularly useful on rifles that may be configured for different tasks over the course of a season. It allows the optic to be attached in a defined position and removed when needed, which suits users who value flexibility in the field or during transport and maintenance. The specified 28.00 mm height helps maintain a practical sight line above the receiver, while the 0 MOA inclination keeps the setup neutral and appropriate for general-purpose zeroing rather than specialized long-range cant.

A further practical advantage is the adjustable windage, which gives the installer room to center the optic more precisely to the rifle. That can reduce the need for excessive reticle correction during zeroing and helps keep the sight’s adjustment range available for actual shooting corrections. With its black aluminium construction, the mount is designed to remain durable in regular field use while keeping bulk and weight in check on a hunting rifle.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German manufacturer based in Fuchsstadt, Germany. The company’s work centers on hunting rifles, red-dot sights and rifle mounting systems, which gives the brand a clear focus on the interface between firearm and optic rather than on optics alone. Within the INNOmount range, the manufacturer offers both quick-clamping and fixed rifle mounts for common platforms such as Weaver and Picatinny rails as well as many rifle-specific bases.

The lineup also extends across several mounting concepts, including tactical, swing and tilt-up mounts, along with scope rings in sizes such as 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth is important in practice because it shows a design approach built around matching the mount to the rifle and optic combination, not forcing every setup into the same pattern.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Height: 28.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: Yes
• Optic type: Guide TS
• Color: Black
• Rifle compatibility: Santa Barbara Mauser and other compatible Mauser-pattern actions
• Upper compatibility: Guide Bottom Mounting Standard

Warranty

INNOmount provides a 2-year warranty for this mount. That period matches the stated manufacturer warranty for the product and covers the mount as a purpose-built rifle and optic interface component.