INNOmount for Weaver/Picatinny, Pulsar Thermion

• Quick-detach one-piece design: The mount lets a Pulsar Thermion be attached or removed in seconds, which is useful when switching between optics or transporting the rifle without leaving the sight in place.
• Repeatable Picatinny interface: Built for Weaver/Picatinny rails, it gives a stable platform that helps preserve mounting consistency after removal and reinstallation.
• 24.00 mm build height: The low profile keeps the optic close to the bore line, supporting a natural shooting position and a more balanced rifle setup.
• 35.0 mm forward extension: The KR extension helps position the Thermion correctly on the rifle, improving eye alignment and making the setup easier to adapt to different stock geometries.
• Aluminium construction: The housing keeps weight under control while remaining suitable for regular field use on hunting and thermal rifle setups.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts are designed as a practical solution for shooters who want a single, rigid mount body with the speed of a quick-detach system. Within the brand’s catalog, these mounts sit in the family of tilt-up style quick-release mounts and cover a wide range of applications, from conventional daytime optics to thermal-imaging and digital devices. That broad compatibility makes the series especially relevant for hunters who run more than one sighting system on the same rifle platform.

A defining feature of the series is the brand’s tool-free clamping concept, which uses thumb-operated release controls to open recessed locking levers quickly. In later Generation II versions, INNOmount also specified details such as anti-rotation clamping screws, spring-loaded release buttons and Torx T20 adjustment screws, showing the series’ focus on secure fit and repeatable handling. The range includes versions for Weaver/Picatinny rails as well as rifle-specific bases, and it is offered for ring diameters such as 35 mm and 36 mm together with rail-based interfaces. In practice, the series is aimed at users who want fast optic changes, low mounting height and a clean one-piece layout without adding unnecessary complexity to the rifle.

About the INNOmount for Weaver/Picatinny, Pulsar Thermion

The INNOmount for Weaver/Picatinny, Pulsar Thermion is a dedicated one-piece mount for pairing a Pulsar Thermion thermal riflescope with a rifle equipped with a Weaver or Picatinny rail. That combination matters because Thermion devices are shaped like conventional 30 mm tube optics, so the mount needs to do more than simply clamp in place; it also has to position the sight correctly for stable, comfortable use on a hunting rifle or thermal shooting setup.

Its 24.00 mm height keeps the optic relatively low over the bore, which helps maintain a natural cheek weld and avoids making the rifle feel top-heavy. The 35.0 mm extension gives extra flexibility in eye-position setup, which is useful when stock geometry, action length or rail placement would otherwise force the optic too far to the rear or front. Because the mount uses a one-piece layout, both clamping points work together as a single unit, which supports alignment and simplifies installation compared with separate rings.

The mount is made from aluminium and finished in black, giving it the durability expected for regular field handling without adding unnecessary bulk. With 0 MOA inclination, it is configured for straightforward, level mounting rather than built-in cant, which suits many thermal applications where a simple and repeatable setup is preferred. For shooters using a Picatinny-based rifle platform and a Thermion optic, this mount is built around secure attachment, fast handling and a clean fit with the sight’s 30 mm tube format.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of practical hunting and shooting equipment rather than general accessories. Within that portfolio, INNOmount focuses on quick-clamping and fixed mounting solutions for rifle optics.

The range covers mounts for Weaver/Picatinny rails as well as several rifle-specific interfaces, and it also includes tactical, swing and tilt-up mount types. INNOmount offers ring sizes including 25.4 mm, 30 mm, 34 mm and 35 mm, along with interfaces for different optic formats. That breadth is important because it shows the brand’s emphasis on matching the mount to both the rifle and the sight, whether the application involves a conventional riflescope, a red dot or a thermal device.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• In production since: 2020
• Warranty: 10 years
• Height BH.: 24.00 mm
• Extension (KR): KR 35.0 mm
• Inclination: 0 MOA
• Optic type: Pulsar Thermion
• Color: Black
• Material: Aluminium
• Mount interface: Weaver/Picatinny
• Tube standard: 30 mm

Warranty

INNOmount covers this mount for 10 years. The stated warranty period suits a product intended for repeated installation and removal on working hunting and thermal rifle setups.