INNOmount for Tikka T3, Pulsar

• Quick-detach operation: The INNOmount design uses a fast clamping system that lets the optic be removed and reinstalled without tools, which is useful when switching between day and digital or thermal setups on the same rifle.
• Low 10.00 mm build height: A low mounting height helps keep the sight line close to the bore, supporting a more natural shooting position and a cleaner cheek weld on Tikka rifles.
• Tikka T3-specific fit: Built for the Tikka T3 and T3x platform, this one-piece mount provides a rifle-specific interface instead of relying on a separate rail, helping keep the setup compact and tidy.
• Pulsar-compatible top interface: The mount is made for Pulsar Apex, Trail and Digisight optics, giving owners of these digital and thermal devices a direct mounting solution matched to the sight footprint.
• Aluminium construction with 0 MOA alignment: The aluminium body keeps weight under control while maintaining rigidity, and the 0 MOA inclination suits general hunting and field use where a neutral mounting angle is preferred.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s tilt-up mount family and are built around the idea of combining fast handling, repeatable positioning and a rifle-specific fit. The series includes both quick-release and fixed one-piece variants, with versions made for common interfaces such as Weaver/Picatinny as well as firearm-specific bases including the Tikka T3 platform. That broad fitment makes the series relevant to hunters and shooters who want a mount tailored to a particular rifle and optic combination rather than a generic adapter.

A defining feature of the family is the brand’s tool-free QD concept, which uses thumb-operated buttons to release recessed locking levers. In the wider one-piece range, INNOmount also lists variants for different optic bodies and rail standards, including larger ring diameters and rail-based interfaces. The design approach stays consistent across the series: keep the mount low in profile, mechanically straightforward and suitable for a wide mix of sighting systems, from conventional daytime optics to thermal-imaging and digital devices. That makes the series especially practical for rifle setups where optics may be changed according to season, quarry or hunting method.

About the INNOmount for Tikka T3, Pulsar

The INNOmount for Tikka T3, Pulsar is a one-piece detachable mount made for pairing a Tikka T3 or T3x rifle with Pulsar optics that use the Apex, Trail or Digisight interface. Its role is straightforward but important: it gives these larger electronic sights a stable, rifle-specific mounting point while keeping the installation compact and easy to manage in the field. For hunters using thermal or digital optics, that matters because these devices are often heavier and bulkier than a conventional riflescope, so mount geometry and handling have a direct effect on balance and shooting comfort.

The mount’s 10.00 mm height helps keep the optic low over the action, which supports a more consistent head position and reduces the sense of bulk that can come with digital or thermal sighting systems. The 0 MOA inclination suits general-purpose hunting use, where a neutral setup is usually preferred over a canted long-range arrangement. Its aluminium construction keeps the mount light enough for practical field carry while still providing the rigidity needed for repeatable optic placement.

Because this is a detachable one-piece mount, it also suits shooters who alternate between sighting systems on the same rifle. A direct Tikka-specific base and a Pulsar-specific upper interface simplify that changeover compared with mixing separate rails and adapters. The result is a cleaner installation with fewer extra parts, making this mount a sensible choice for hunting rifles that move between daytime and electronic optics.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of practical hunting and shooting equipment rather than general accessories. Within the INNOmount range, the company offers both quick-clamping and fixed mounts as well as solutions for Weaver/Picatinny platforms and numerous rifle-specific bases.

The brand’s catalog also extends across several mount types, including tactical, swing and tilt-up mounts, reflecting a focus on matching different optics and firearm systems with the appropriate mechanical interface. INNOmount also supports a wide spread of optic formats, from conventional scope rings in common diameters to dedicated interfaces for rail-mounted and electronic sights. That specialization gives the brand a strong identity in the mounting category, especially for shooters who want a precise fit between rifle, optic and mount design.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount type: One-piece detachable mount
• Compatibility: Tikka T3, Tikka T3x
• Optic interface: Pulsar Apex, Trail, Digisight
• Height: 10.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Material: Aluminium
• Color: Black

Warranty

INNOmount provides a 10-year warranty for this mount. That stated term suits a component intended for repeated optic changes and regular field use on hunting rifles.