Falcon X50 10-50x60 Field Target

• 10-50x magnification range: The wide zoom span lets the scope cover close precision work and very fine target observation at high power, which is especially useful for field target and benchrest disciplines where exact aim and clear pellet-strike reading matter.
• 60 mm objective lens: A large front lens supports a bright, easy-to-read image across the magnification range and helps maintain usable detail when the scope is pushed toward its highest powers.
• Side-focus parallax from 9 - 300m: Precise parallax correction is central to field target shooting, and the close minimum setting allows accurate range assessment and a sharper target image at the distances where small errors are costly.
• MOA200 reticle in second focal plane: The SFP layout keeps the reticle visually consistent as magnification changes, so the sight picture stays fine and uncluttered for careful shot placement on small targets.
• 30 mm one-piece construction: The single-piece tube, saddle and objective design gives the riflescope a solid mechanical base, helping it hold alignment under regular transport, repeated adjustment and recoil.

About the Falcon X50 Series

The Falcon X50 series was introduced in 2019 as a Japanese-built, high-magnification competition riflescope family for field target and benchrest shooting. In Falcon’s lineup, it sits as a specialist model for shooters who need very high top-end magnification, careful parallax control and a fine aiming presentation rather than a general-purpose hunting optic. The series is built around a 10-50x optical system with a 60 mm objective lens, giving it the image scale and target detail needed for precision disciplines.

Falcon offered the X50 in Field Target and Long Range parallax configurations, reflecting the different needs of competition shooters. Field Target versions were available with snap-focus and fine-focus options, and later updates brought a revised side-parallax mechanism and cam design to improve ranging control. Across the series, Falcon uses a second-focal-plane MOA200 reticle and a 30 mm main tube with a one-piece tube, saddle and objective construction. That design approach favors repeatable adjustment, mechanical rigidity and a clean, competition-oriented layout suited to shooters who spend long sessions behind the rifle and rely on precise optical feedback.

About the Falcon X50 10-50x60 Field Target

The Falcon X50 10-50x60 Field Target is configured for shooters who need a riflescope that prioritizes precise ranging, fine target definition and repeatable adjustment. Its 10-50x magnification range gives it unusual flexibility within a specialist target scope: lower settings provide a broader, steadier view for finding the lane and settling position, while the upper end gives the image scale needed for reading tiny kill zones and making very exact holds. Paired with a 60.00 mm objective lens and fully multicoated optics, the scope is designed to preserve contrast and image clarity when magnification is increased.

The side-focus parallax adjustment from 9 - 300m is one of the model’s defining features for field target use. Close-range parallax capability matters in this discipline because the shooter often uses focus behavior as part of distance judgment, and the side control is easier to operate from the firing position than an objective bell adjustment. The MOA200 reticle sits in the second focal plane, so its apparent size stays constant through the zoom range; that helps keep the aiming point fine and readable at high power. With 1/8 MOA clicks, 10 MOA per turn and 50.00 MOA of elevation and windage travel, the turret system is set up for careful zeroing and small corrections rather than hurried dialing. A fast-focus eyepiece, 30 mm tube, nitrogen filling and waterproof, fogproof, shockproof construction round out a scope built for sustained competition use.

About Falcon

Falcon Optical Systems Limited is registered in England and Wales and focuses on optics for practical and precision shooting disciplines. The company describes its product range around applications such as 3-Gun, PRS, HFT, Field Target and Benchrest competition, which places it firmly in the sporting and target-optics segment rather than general outdoor observation. Falcon’s riflescope range includes specialist designs for very different uses, from compact low-power competition scopes to high-magnification models for long-range and benchrest work.

Within this category, Falcon is particularly associated with scopes that combine competition-oriented reticles, high magnification and purpose-built mechanical layouts. The company states that the X50 10-50×60 has been manufactured since 2019, and it also notes Japanese manufacture for this model family. Across the range, Falcon has used features such as extra-low-dispersion glass in selected models and has positioned its optics around the practical needs of match shooters who value precise adjustment, stable mechanics and application-specific configurations.

Main Features

• Magnification: 10.00 x - 50.00 x
• Objective lens diameter: 60.00 mm
• Main tube diameter: 30 mm
• Reticle position: 2. focal plane - SFP
• Reticle: MOA200
• Illumination: No
• Click value: 1/8 MOA
• Elevation adjustment range: 14.50 mrad / 50.00 MOA
• Windage adjustment range: 14.50 mrad / 50.00 MOA
• Adjustment per turn: 10 MOA
• Turret type: MT - Multi Turn
• Turret rotation direction: CCW
• Zero stop: No
• Eye relief: 97.00 mm - 115.00 mm
• Field of view: 3.00 m/100m - 0.70 m/100m
• Parallax adjustment: Yes - side focus
• Parallax range: 9 - 300m
• Exit pupil: 10.00 mm - 1.20 mm
• Lens coating: Fully Multicoated
• Fast focus eyepiece: Yes
• Length: 429.00 mm
• Weight: 850.00 g
• Housing fill: Nitrogen
• Waterproof: Yes
• Fogproof: Yes
• Shockproof: Yes
• Objective diameter: 69
• Eyepiece diameter: 42.5
• Made in: Japan

Warranty

Falcon provides a 10-year warranty for this riflescope. This stated term gives long-term coverage in years without relying on open-ended warranty language.

In the Box

• Throw lever
• Sunshade
• Flip-up lens covers