Leupold STD One-Piece base, Savage 110

• One-piece steel construction: The single-piece base adds rigidity between the action and optic, helping maintain alignment under recoil and hard field use while giving the scope a stable mounting platform.
• STD mounting interface: Built for Leupold Standard (STD) rings, this base uses the proven front dovetail and rear windage-adjustable layout, which helps center the scope during installation and preserves internal scope adjustment.
• Savage long-action fit: Designed for Savage 110, 111, 112, 114 and 116 long-action flat-back rifles, it provides the correct footprint for a secure, model-specific installation.
• Steel build made in the USA: The steel body resists wear at the ring contact points and stands up well to repeated mounting, making it a practical choice for hunting rifles that see regular use.
• Low-profile base height: With a 4.00 mm base height, it keeps the mounting setup compact and supports a practical scope position without unnecessary bulk above the receiver.

About the Standard (STD) Series

Leupold Standard (STD) bases and rings are designed as a traditional steel mounting system for hunters and shooters who want a secure, mechanically simple way to mount a riflescope. Within Leupold’s mount lineup, the STD series sits as a long-established option that balances strength, fit-specific compatibility and straightforward installation across a wide range of rifles. The system is built around a front dovetail engagement and a rear ring secured by windage screws, a layout that gives the installer some lateral adjustment while bore sighting and helps keep the scope centered in the mount.

That design is especially useful on sporting rifles where dependable alignment matters more than quick-detach features or rail-based modularity. Steel construction is a defining part of the series, giving the bases and rings the durability needed for repeated recoil, transport and seasonal field use. STD components are offered in one-piece and two-piece configurations, letting shooters choose between added receiver rigidity or easier loading-port access depending on the rifle and application. For classic hunting optics setups, the series remains a practical choice because it focuses on fit, stability and long-term durability rather than unnecessary complexity.

About the Leupold STD One-Piece base, Savage 110

The Leupold STD One-Piece base, Savage 110 is a model-specific steel base made for Savage long-action flat-back rifles, including the 110, 111, 112, 114 and 116. Its one-piece layout gives the scope mounting system a solid bridge across the receiver, which can help maintain consistent alignment when the rifle is carried hard, fired regularly or used through changing weather conditions. For a hunting rifle or general-purpose sporting setup, that added rigidity is often valued for its simplicity and dependable feel.

This base is built for the Leupold Standard (STD) interface, so it works with STD rings and the series’ front dovetail and rear windage-screw arrangement. In practice, that means the front ring locks firmly into place while the rear ring allows lateral adjustment during setup. That can make scope alignment easier and helps avoid using too much of the riflescope’s internal windage adjustment just to correct mounting position. The result is a cleaner installation and more usable adjustment range in the optic itself.

Its steel construction suits rifles that are expected to hold zero through recoil and repeated handling, while the 4.00 mm base height keeps the setup relatively low and tidy. For shooters building a traditional bolt-action hunting rifle with a conventional scope, this base offers a straightforward, durable mounting foundation without moving to a rail system or more tactical-style hardware.

About Leupold

Leupold & Volpel was founded in Portland, Oregon, in 1907 by Fred Leupold and Adam Volpel. The company later introduced its first riflescope, the Plainsman, in 1947, establishing the direction that would define the brand in sport optics. Leupold’s product range now includes riflescopes, red dot sights, binoculars, spotting scopes, rangefinders and thermal optics, with a strong focus on hunting, shooting and outdoor use.

The company introduced the Duplex reticle in 1962, a design that became widely recognized in sporting optics for its practical aiming layout. Leupold moved its manufacturing plant and headquarters to Beaverton in 1968, and Leupold & Stevens, Inc. remains headquartered in Beaverton, Oregon. As a family-owned American optics manufacturer, the brand is closely associated with durable field-ready optics and mounting systems built for sporting and tactical applications.

Main Features

• Manufacturer: Leupold
• Product type: One-piece base
• Mount standard: Leupold Standard (STD)
• Compatible rifles: Savage Model 110 (LA/flat-back), Savage Model 111 (LA/flat-back), Savage Model 112 (LA/flat-back), Savage Model 114 (LA/flat-back), Savage Model 116 (LA/flat-back)
• Material: Steel
• Base height: 4.00 mm
• Made in: USA
• Warranty: 10 years

Warranty

Leupold covers this mount with a 10-year warranty. That stated term suits a steel mounting component intended for long service on a working hunting or sporting rifle.