INNOmount ZERO for Tikka T3, Pulsar

• Rifle-specific Tikka T3/T3x fit: This one-piece mount is made for the Tikka T3 platform, giving a direct and secure interface that helps keep the sight aligned and the installation compact.
• Pulsar-compatible upper interface: The mount is configured for Pulsar Apex, Trail and Digisight devices, so it provides a purpose-built connection for digital and thermal optics instead of relying on improvised adapters.
• One-piece aluminium construction: The single-body design keeps the mount light while maintaining the rigidity needed for repeatable positioning under field use and recoil.
• ZERO detachable concept: As part of the INNOmount ZERO family, this mount is built around fast removal and reattachment, which is useful when an optic needs to be moved, serviced or replaced without changing the rifle setup.
• Non-windage-adjustable layout: With no separate windage adjustment built into the mount, the design stays straightforward and mechanically clean, reducing extra parts and keeping the setup simple.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s tilt-up mount family and are intended for shooters who want a compact, rifle-specific mounting solution for more than just conventional day optics. The series is designed to support daytime, thermal-imaging and digital devices, which makes it relevant for hunting rifles that may be used across changing light conditions and different sighting systems. Within the range, INNOmount offers both one-piece quick-release and fixed versions, allowing the same general concept to serve users who prioritise either fast removal or a more permanent installation.

The series is broad in its interfaces and base options. Variants are offered for Weaver/Picatinny platforms and firearm-specific bases, including Tikka T3, while upper interfaces cover ring sizes as well as rail-based optic standards. In the quick-detach versions, the system uses thumb-operated release buttons to unlock recessed levers without tools, reflecting the brand’s emphasis on practical field handling. Across the family, the one-piece format focuses on keeping the optic and mount as a single, stable unit, which helps simplify installation and supports consistent positioning when the optic is removed and reattached.

About the INNOmount ZERO for Tikka T3, Pulsar

The INNOmount ZERO for Tikka T3, Pulsar is a dedicated one-piece mount for combining a Tikka T3 or T3x rifle with Pulsar digital or thermal sights that use the relevant Pulsar mounting interface. Rather than adapting a general-purpose mount to a specialist optic, this model is built around that exact pairing, which helps keep the installation neater and more secure. It is suited to hunters and night-shooting users who run Pulsar Apex, Trail or Digisight devices and want a mount that matches both the rifle action and the optic footprint.

The one-piece layout matters in practice because it keeps the optic support structure unified, reducing the number of separate parts between rifle and sight. That is especially useful with digital and thermal devices, which are often bulkier than conventional riflescopes and benefit from a stable mounting platform. The aluminium construction helps keep overall weight under control while still providing the stiffness needed for field use. Because this is a ZERO detachable mount, it also suits setups where the optic may need to be removed for transport, swapped between sighting systems or reinstalled after maintenance.

This version does not use windage adjustment in the mount body, so the design stays mechanically straightforward. For the user, that means fewer external adjustments on the mount itself and a cleaner interface between rifle and optic. In a hunting optics setup built around a Tikka action and a Pulsar sight, that simplicity is often an advantage: the mount’s job is to hold the device securely, keep the profile compact and provide a repeatable connection tailored to the rifle and optic combination.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a company based in Fuchsstadt, Germany. The brand focuses on scope and sight mounting solutions for hunting and shooting rifles, with a catalogue that includes tactical, swing and tilt-up mounts as well as quick-clamping and fixed designs. INNOGUN also manufactures hunting rifles, rifle-scope mounts and red-dot sights at its Fuchsstadt site, which places mounting systems within a broader firearms and optics-accessory background.

The INNOmount range is built around compatibility and application-specific fit. Its products are offered for Weaver/Picatinny rails and rifle-specific mounting bases, and the line also includes scope rings in common sizes such as 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth is important in practice because it allows the brand to cover traditional riflescopes, red dots and specialist digital or thermal optics with purpose-built mounting solutions rather than one-size-fits-all hardware.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount type: One-piece detachable mount
• Compatible optic type: Pulsar Apex, Trail, Digisight
• Material: Aluminium
• Windage adjustable: No
• Compatibility above: Pulsar Trail Mounting Standard
• Compatibility below: Lynx Light Hunter MA, Lynx Light Hunter SA, Lynx 94 MA, Lynx 94 LA, Lynx 94 SA, Lynx TD 21 MA, Lynx TD 21 LA, Lynx TD 15 LA, Lynx TD 15 MA, Lynx TD 12 LA, Lynx TD 12 MA, Sako TRG 21/41, Sako TRG 22/42, Sako 90 XS Optilock, Sako 90 S Optilock, Sako 90 SM Optilock, Sako 90 M Optilock, Sako 90 L Optilock, Tikka M558, Tikka M590, Tikka M595, Tikka M690, Tikka T3, Tikka T3x

Warranty

10 years. INNOmount specifies this mount with a 10-year warranty, providing long-term coverage for a component that is central to the rifle-and-optic interface.