INNOmount Pulsar Trail2 Pivot Mount, Zastava Mod 70

• Pivot mounting system: The pivot design lets the optic be removed and reattached in a repeatable way, which is useful for hunters who alternate between day optics and digital night devices on the same rifle.
• Built for Pulsar Trail2 and Digisight Ultra: This mount is made for the Pulsar Trail2 / Digisight Ultra N450 & N455 interface, giving a direct fit for these digital optics without improvised adapters.
• Adjustable windage: Integrated windage adjustment helps align the sight cleanly with the rifle and mounting base, reducing setup compromise and making zeroing more straightforward.
• 14.00 mm build height: The moderate mounting height helps keep the optic low over the bore, supporting a more natural head position while still providing clearance for the device and rifle action.
• High-strength aluminium construction: The aluminium body keeps weight under control while providing the rigidity needed for field use, repeated mounting cycles, and stable optic support.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the brand’s swing-mount category and are intended for shooters who want a detachable mounting solution without giving up a rifle-specific fit. The series is built around a high-strength aluminum body, keeping the mount strong enough for regular field use while avoiding unnecessary bulk on the rifle. Within the lineup, INNOmount offers versions for different attachment concepts, including a lever lock for a 15 mm prism and an EAW pivot-bolt lock, which gives the range broad compatibility across traditional hunting rifles and modern optic interfaces.

A key characteristic of the series is its wide choice of upper interfaces. Depending on the model, the mounts are available for conventional rings as well as rail-based optics such as Swarovski SR and Zeiss ZM/VM. This makes the family relevant not only for classic day scopes, but also for specialized sighting systems where a secure, detachable mount is important. The design philosophy is practical: a rifle-specific lower fit, a repeatable pivot mechanism, and a clean installation that suits hunting rifles where handling, balance, and the ability to remove the optic matter as much as raw strength.

About the INNOmount Pulsar Trail2 Pivot Mount, Zastava Mod 70

The INNOmount Pulsar Trail2 Pivot Mount, Zastava Mod 70 is a one-piece pivot mount made for pairing a Zastava Mod 70 with optics that use the Pulsar Trail2 / Digisight Ultra N450 & N455 mounting standard. That makes it especially relevant for hunters using digital night vision or thermal-ready rifle setups based on the Pulsar platform, where a secure mechanical interface is just as important as the optic itself. By matching the rifle-specific lower geometry to the Pulsar-compatible upper, this mount avoids the compromises that often come with generic rail conversions.

The mount uses an aluminium body and a 14.00 mm build height, a combination that helps keep the setup trim and well balanced on the rifle. A lower, well-proportioned mounting position can improve cheek weld and make the rifle feel more natural when shooting from field positions. The 0 MOA inclination keeps the setup neutral, which suits general hunting distances and straightforward zeroing with digital optics. An additional practical advantage is the adjustable windage, which gives extra latitude during installation and helps center the optic mechanically over the bore. Finished in black, the mount maintains a discreet appearance that matches both blued and modern coated rifles while protecting the clean, purpose-built look expected from a detachable hunting mount.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German manufacturer based in Fuchsstadt, Germany. The company’s work focuses on practical shooting equipment, including hunting rifles, red-dot sights, and a broad range of rifle mounts. Within that portfolio, INNOmount is the specialist line for optic mounting solutions, covering quick-clamping and fixed mounts for Weaver/Picatinny rails as well as many rifle-specific base patterns.

The range includes tactical, swing, and tilt-up mounts, along with scope rings in sizes such as 25.4 mm, 30 mm, 34 mm, and 35 mm. That breadth is important because it shows the brand’s emphasis on solving real compatibility problems between rifles and optics rather than offering only one mounting standard. For hunting optics and digital sighting devices, INNOmount is known for combining a precise mechanical fit with detachable designs that remain practical in everyday field use.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Build height: 14.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: Yes
• Optic type: Pulsar Trail2 / Digisight Ultra N450 & N455
• Color: Black
• Upper compatibility: Pulsar Trail Mounting Standard
• Lower compatibility: Zastava M70 Bolt action pivot-mount bases

Warranty

10 years. INNOmount specifies a 10-year warranty for this mount, giving long-term support for a component that is central to optic retention, repeatable fit, and reliable field use.