INNOmount for Weaver/Picatinny, Pulsar Trail 2

• Quick-detach one-piece design: the mount lets a Pulsar Trail 2 or Digisight Ultra sight be removed and reinstalled quickly, which is useful when switching between optics or transporting the rifle more compactly.
• Repeatable clamping system: built as a repeatable mount for Weaver and Picatinny rails, it helps maintain a consistent mounting position so the optic can return to service with minimal shift after removal.
• Low 10.00 mm build height: the low profile keeps the sight close to the bore, supporting a more natural head position and a more compact overall rifle setup.
• Dedicated Pulsar interface: made specifically for Pulsar Trail2 / Digisight Ultra N450 & N455 devices, it provides a direct fit instead of relying on generic adapters.
• Aluminium construction: the mount combines low weight with the rigidity needed for field use, making it well suited to hunting rifles and thermal or digital sight setups.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts are built for shooters who want a single, rigid mounting unit with the convenience of a quick-detach system. Within the brand’s catalogue, these mounts sit in the family of tilt-up and quick-release mounting solutions, covering both standard bases such as Weaver/Picatinny and a range of rifle-specific interfaces. The series is designed for more than conventional daytime optics; it also supports thermal-imaging and digital devices, which makes it especially relevant for modern hunting rifles that may be used across changing light conditions.

A defining feature of the series is the brand’s tool-free clamping concept, using thumb-operated release controls to open recessed locking levers quickly. This approach is intended to make optic changes faster while keeping the mount compact and mechanically secure. Across the wider one-piece range, INNOmount also offers versions for ring-mounted scopes and rail-interface optics, showing the series’ emphasis on flexibility rather than a single optic format. The overall design philosophy focuses on low construction height, practical handling and repeatable attachment, which are all important when a rifle is expected to carry different optics without turning the mounting system into a bulky add-on.

About the INNOmount for Weaver/Picatinny, Pulsar Trail 2

The INNOmount for Weaver/Picatinny, Pulsar Trail 2 is a dedicated one-piece mount for fitting compatible Pulsar Trail2 and Digisight Ultra N450 & N455 sights to rifles equipped with a Weaver or Picatinny rail. Its main advantage is that it avoids the compromises of a universal adapter: the upper interface is made for this specific sight pattern, while the lower section is matched to one of the most common rail standards in hunting and tactical rifle setups.

The mount’s 10.00 mm height helps keep the optic low over the bore. In practice, that usually supports a steadier cheek weld and a more controlled shooting position, which matters when using digital or thermal sights that already add bulk compared with a conventional daytime riflescope. The KR 0.0 mm extension keeps the layout neutral, making it suitable where the rifle and optic combination already provides the correct eye position without needing forward or rearward offset.

Its aluminium construction balances strength and manageable weight, so the rifle does not become unnecessarily heavy at the mounting point. As a detachable and repeatable mount, it is particularly useful for shooters who alternate between sighting systems or remove the optic for transport and storage. For rifles such as Accuracy International, Anschutz, Baikal, Benelli, Beretta and CZ models equipped with the appropriate rail, this mount provides a clean and purpose-built way to install a Pulsar digital or thermal-compatible sight.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. The company manufactures hunting rifles, riflescope mounts and red-dot sights at its German site, which places the brand firmly in the field of practical hunting and shooting equipment rather than general accessories. Within the INNOmount range, the company offers quick-clamping and fixed mounts for both Weaver/Picatinny rails and numerous rifle-specific mounting bases.

The brand’s catalogue covers several mount types, including tactical, swing and tilt-up mounts, along with scope rings in common diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth is relevant here because it shows INNOmount’s focus on solving real interface problems between rifles and optics, including modern digital and thermal devices. The result is a product line centred on secure fit, repeatable attachment and compatibility across a wide variety of firearm platforms.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Warranty: 10 years
• Height BH.: 10.00 mm
• Extension (KR): KR 0.0 mm
• Optic / sight type: Pulsar Trail2 / Digisight Ultra N450 & N455
• Color: Black
• Material: Aluminium
• Mount base compatibility: Picatinny Rail

Warranty

INNOmount covers this mount for 10 years. The stated warranty period matches the product specification and gives long-term support for a component that is central to optic retention and repeatable mounting performance.