INNOMOUNT for Blaser, Picatinny rail, 200 mm

• Blaser-specific fit: This INNOmount rail is made for the Blaser mounting standard, giving a secure interface on compatible Blaser and related platforms without improvised adapters.
• Picatinny top interface: The Picatinny rail format accepts a wide range of optics mounts, making it easier to move between riflescopes, red dots, thermal devices or other accessories that use the same standard.
• 200 mm rail length: The 200.00 mm length provides generous mounting space, which helps with eye-relief positioning and gives more freedom when setting up different optic sizes.
• Low 20.00 mm build height: A moderate 20.00 mm height helps keep the optic close to the bore line, supporting a more natural shooting position and a cleaner overall rifle setup.
• Aluminium construction: The aluminium body keeps weight under control while remaining suitable for regular field use on hunting and sporting rifles.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s practical, modular mounting range and are built for shooters who want a clean, stable way to join rifle and optic. The series is associated with the tilt-up mount family and is designed around fast handling, straightforward installation and compatibility with a broad variety of sighting systems. In the wider INNOmount catalog, one-piece mounts are offered both as quick-release and fixed versions, which makes the series relevant for hunters, sport shooters and users running more than one optic on the same rifle platform.

A defining characteristic of the family is its broad interface support. Depending on the version, these mounts are available for Weaver/Picatinny platforms and for rifle-specific bases, while the sight side can be configured for rings or rail-based optics. The series is intended not only for conventional daytime scopes, but also for thermal-imaging and digital devices, which reflects a design approach focused on versatility rather than a single use case. Across the range, the emphasis stays on low-profile construction, repeatable positioning and a mounting system that keeps optic changes simple in the field.

About the INNOMOUNT for Blaser, Picatinny rail, 200 mm

The INNOMOUNT for Blaser, Picatinny rail, 200 mm is a dedicated mounting solution for rifles that use the Blaser mounting standard. Instead of locking the user into one optic footprint, it creates a full-length Picatinny interface on the rifle, which is useful for shooters who want to run different optics on the same platform. That can include a conventional riflescope for daytime hunting, a compact red dot for fast shooting at short distance, or a thermal or digital device that requires more flexibility in positioning.

The long 200.00 mm rail is one of the model’s main advantages. It gives more room to place mounts exactly where they are needed, which matters when balancing eye relief, ring spacing and the overall handling of the rifle. The 20.00 mm build height helps maintain a relatively low setup, supporting a natural cheek weld and reducing the overly tall sight line that can make a rifle feel less settled. With 0 MOA inclination, this version is aimed at general-purpose hunting and sporting use where a neutral rail geometry is preferred over a pre-tilted long-range setup.

The rail is made from aluminium and finished in black, combining low visual impact with sensible weight control. The listed KR 100.0 mm extension adds further placement flexibility, while the non-adjustable windage layout keeps the design simple and mechanically direct. For Blaser owners who want a versatile optic interface rather than a single-purpose mount, this rail provides a practical base for a wide range of sighting equipment.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG. The company is based in Fuchsstadt, Germany, where it manufactures hunting rifles, rifle-scope mounts and red-dot sights. Within that portfolio, INNOmount focuses on mounting solutions for shooters who need dependable interfaces between firearm and optic rather than one-size-fits-all hardware.

The brand’s range includes quick-clamping and fixed rifle mounts, with versions for Weaver/Picatinny systems as well as several rifle-specific mounting bases. Its catalog also covers tactical, swing and tilt-up mount types, showing a clear specialization in adapting optics to different rifle actions and use cases. INNOmount also offers scope rings in common diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm, which underlines the brand’s role as a dedicated optics-mounting specialist rather than a general accessory label.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount height: 20.00 mm
• Extension (KR): KR 100.0 mm
• Inclination: 0 MOA
• Windage adjustable: No
• Optic interface: Picatinny Rail
• Color: Black
• Material: Aluminium
• Length: 200.00 mm
• Compatibility below: Blaser BB 97, Blaser R8, Blaser R93, Blaser BBF 95, Blaser BBF 97, Blaser BD 14, Blaser BS 97, Blaser D99, Blaser K95, Blaser S2, Blaser BS 95, Sauer 505, Blaser Mounting Standard, Jakele J1
• Compatibility above: Picatinny Rail

Warranty

INNOmount provides a 10-year warranty for this mount. That stated warranty period suits a product intended for repeated optic changes and regular field use on hunting and sporting rifles.