Rusan Front Pivot Base for Anschutz 54/64 (11 mm prism)

• Made for Anschutz 54/64 11 mm prism rifles: this front pivot base is shaped for the correct receiver interface, giving a secure starting point for a Rusan pivot-mount setup on compatible Anschutz rimfire and target rifles.
• Steel construction: the steel body provides the rigidity needed to keep the mount interface stable under repeated use, helping the optic return to the same position after removal and refitting.
• Part of the Rusan Pivot Mounts system: as a dedicated spare part for Rusan pivot mounts, it supports a modular mounting arrangement that lets users replace or configure individual components instead of changing the whole mount.
• 0 MOA inclination: the neutral base keeps the optic aligned without built-in cant, which suits general-purpose mounting where no additional elevation bias is required.
• Black finish: the subdued finish matches most rifles and mount components while adding a practical protective layer for regular field and range handling.

About the Rusan Pivot Mounts Series

Rusan Pivot Mounts are a family of firearm optics mounts built around a modular swivel-mount concept. In Rusan’s lineup, the series covers both complete mounts with bases and pivot-mount units supplied without bases, which makes the system useful both for new installations and for replacing individual parts in an existing setup. The range includes versions for specific rifle makes and models, including Anschutz and Antonio Zoli, as well as variants for different mounting interfaces such as 11 mm prisms and Picatinny rails.

The series is designed for shooters who want a mount that can be matched closely to the rifle and optic rather than adapted with generic hardware. Rusan also lists complete pivot mounts with ring sizes for 26 (25.4), 30, 34, 36, and 40 mm scope tubes, showing that the system is intended to support a wide spread of sporting and hunting optics. Across the series, the emphasis is on steel construction and quick-release fixation, combining mechanical strength with the practical advantage of fast optic removal and refitting.

About the Rusan Front Pivot Base for Anschutz 54/64 (11 mm prism)

The Rusan Front Pivot Base for Anschutz 54/64 (11 mm prism) is the forward base element used in a Rusan pivot-mount arrangement for compatible Anschutz rifles. As a model-specific part, it is intended for shooters who need the correct front interface for a rifle already cut with an 11 mm prism, whether for a repair, a replacement, or completion of a pivot-mount assembly.

Its role is simple but important: the front base forms the anchor point on which the pivoting mount engages. In practice, that means the part has to fit the rifle correctly and remain dimensionally stable over time. The use of steel is therefore significant, because it gives the base the stiffness and wear resistance needed for repeated mounting cycles and for maintaining consistent contact with the rest of the pivot system. For a detachable optics setup, that mechanical consistency matters more than cosmetic complexity.

The base uses a 0 MOA inclination, so it does not add built-in cant to the optic. That makes it a straightforward choice for standard mounting applications where the shooter wants the optic to sit in a neutral position. Finished in black, it integrates cleanly with the rest of the rifle and mount hardware. As part of the Rusan Pivot Mounts ecosystem, this front base is best understood as a precise, rifle-specific component that supports a solid and repeatable detachable mounting solution.

About Rusan

Rusan traces its roots to a family metalworking business dating to 1983. Željko Rusan opened a gunsmith shop in 1986, and the company began producing scope mounts in 1993. Based in Marija Bistrica, Croatia, Rusan-Mikron focuses on practical firearm and optics-mounting components rather than broad outdoor equipment lines.

The company is especially known for products that connect optics securely to rifles, including scope mounts, scope rings, Picatinny rails, and firearm tuning products. Its range also covers adapter clamps for clip-on sights and adapters for night-vision and thermal-imaging devices. Rusan introduced its clip-on sight adapter clamp in 2009, a product type that became closely associated with the brand. That background is relevant here because it shows long-standing expertise in machining small, fit-critical parts where alignment, repeatability, and durability matter.

Main Features

• Manufacturer: Rusan
• Mount series: Rusan Pivot Mounts
• Compatibility: Anschutz 54/64 (11 mm prism)
• Category: Front pivot base
• Material: Steel
• Color: Black
• Inclination: 0 MOA
• Made in: Croatia

Warranty

10 years. Rusan specifies a ten-year warranty for this front pivot base.