Redding Complete Set 223 Rem Type S-Bushing Style

• Type S bushing neck sizing: The Type S design lets the reloader tune neck tension with interchangeable bushings, reducing unnecessary working of the brass and helping maintain more consistent bullet release from one round to the next.
• Three-die set with Body Die included: This set combines a neck sizing die, a seating die, and a Body Die, so the case body and shoulder can be corrected when needed without giving up the control advantages of neck-sized brass.
• Conventional seating die with crimp capability: The seating die handles bullet seating and can be adjusted to apply a roll crimp when the load calls for it, giving added flexibility for different .223 Remington applications.
• Steel die construction: Hardened steel dies stand up to repeated loading sessions and maintain precise internal dimensions, which matters when building repeatable ammunition for accuracy-focused rifles.
• Standard 7/8"-14 thread fit: The dies install in common reloading presses, making it easy to add precise neck-sizing capability to an established bench without changing press standards or workflow.

About the Type S Series

Redding Type S dies are built for handloaders who want more control over case neck tension than a conventional fixed-dimension sizing die can provide. In Redding’s lineup, the Type S series sits as a precision-oriented option for reloaders working with bolt-action and other accuracy-focused rifle cartridges, especially where brass life, concentricity, and repeatable bullet release matter. The defining feature is the use of interchangeable neck bushings, which allow the amount of neck sizing to be matched more closely to the brass and bullet combination being used.

That approach makes the series well suited to precision shooting, varmint rifles, and carefully tuned hunting loads where small changes in neck tension can influence consistency. Depending on the exact die configuration, the Type S family can be set up for neck sizing only or paired with body sizing solutions that let the reloader manage shoulder position separately. Redding’s steel construction, straightforward adjustment system, and compatibility with standard presses keep the design practical at the loading bench, while the bushing-based system gives experienced reloaders a more refined way to tune ammunition for a specific rifle.

About the Redding Complete Set 223 Rem Type S-Bushing Style

The Redding Complete Set 223 Rem Type S-Bushing Style is built around the needs of reloaders who want to get more from .223 Remington brass than a standard full-length die set typically allows. Its core advantage is the Type S bushing neck die, which sizes the neck with a removable bushing system rather than a fixed internal diameter. In practice, that means neck tension can be tuned to the brass lot, bullet choice, and rifle chamber, helping the handloader pursue more uniform seating feel and more consistent cartridge performance.

This set is especially useful for shooters who prefer to neck size for a familiar rifle but still want a controlled way to bring the case body and shoulder back into specification when required. The included Body Die handles that task separately, so the brass can be maintained with less overall working during routine loading cycles. That can help extend case life while preserving the fit advantages many reloaders look for in ammunition tailored to one rifle.

The conventional seating die completes the set by handling bullet seating and allowing a roll crimp when needed. Combined with the steel construction and standard 7/8"-14 press compatibility, the result is a practical precision reloading setup for varmint shooting, target work, and carefully assembled hunting ammunition where control over neck sizing is a meaningful part of the loading process.

About Redding

Redding Reloading Equipment was founded by Burr Bement in 1946 in Virgil, New York. The company later marketed its products under the Redding Reloading Equipment name in the 1960s and built its reputation around tools for serious handloaders. Today, its headquarters are in Cortland, New York, and the company remains focused on equipment for loading metallic cartridges.

Redding specializes in handloading tools such as reloading dies, presses, powder measures, scales, and case-preparation equipment. Within rifle reloading, it is especially well known for Type S bushing dies and Competition series dies, both aimed at reloaders seeking tighter control over cartridge dimensions and bullet seating. That background makes Redding a natural fit for products like this .223 Remington die set, where precise neck sizing and repeatable setup are central to the way the tool is used.

Main Features

• Manufacturer: Redding
• Made in: USA
• Caliber compatibility: .223 Remington
• Die operation: Body sizing, Bullet seating, Decapping, Neck sizing, Roll Crimp
• Pack size: 3 die set
• Die type: Bushing
• Bushing: Yes
• Bushing style: Type S - Bushing Neck Die Set
• Case body design: Bottle neck
• Case type: Rifle
• Sizing die material: Steel
• Adjustment: Standard
• Press compatibility: Standard 7/8"-14 thread
• Bullet diameter: 5.60 mm
• Bullet diameter (inch): 223.00 inch

Warranty

Redding provides a 10-year warranty for this die set.

In the Box

• Type S-Bushing Neck Die
• Body Die
• Conventional Seating Die