EAW Front Pivot Base for Sauer 202 Medium

• Front base for Sauer 202 Medium: This base is made specifically for the Sauer 202 Medium, giving the front section of an EAW pivot mount the correct fit on the rifle action for secure, repeatable installation.
• Part of the EAW Pivot Mounts system: Used within the EAW Pivot Mounts platform, it supports quick removal and reattachment of the optic while helping maintain the rifle’s established zero.
• Steel construction: The steel body provides the rigidity and wear resistance needed at a critical mounting interface, especially on hunting rifles that see repeated mounting cycles over many seasons.
• 0 MOA inclination: With 0 MOA built in, the base keeps the optic on a neutral mounting plane, which suits general hunting and sporting setups where no additional cant is required.
• Made in Germany: Built in Germany, this base follows the manufacturing approach EAW is known for in premium riflescope mounting systems, with close attention to fit and repeatability.

About the EAW Pivot Mounts Series

EAW Pivot Mounts are one of the company’s best-known mounting systems and have been part of the brand’s range for more than 50 years. The series is built for common rifles and long guns, with a design centered on a practical requirement in hunting optics: the ability to remove a scope and reinstall it without shifting the point of impact. That makes the system especially useful for rifles that may be used with more than one optic, or with a second aiming device for different field conditions.

A defining characteristic of the series is its adjustable front and rear mount-foot fit, which allows the mount to be matched precisely to the rifle and upper assembly. In practice, this supports a secure, repeatable lock-up and helps the optic return to the same position after removal. Within EAW’s lineup, the pivot mount sits as a traditional, mechanically focused solution for hunters and shooters who value interchangeability, solid steel construction, and a mounting concept proven over decades of use.

About the EAW Front Pivot Base for Sauer 202 Medium

The EAW Front Pivot Base for Sauer 202 Medium is the front mounting element for building an EAW pivot-mount setup on the Sauer 202 Medium rifle. Its role is straightforward but important: it creates the front bearing and locating point that allows the upper mount assembly to pivot into place and return to the same fitted position when reattached. For hunters who remove an optic for transport, switch between different sighting systems, or maintain separate optics for different loads or hunting conditions, that repeatability is the practical value of the system.

The base is made from steel, which suits a component exposed to repeated engagement and disengagement over time. A rigid steel front base helps preserve fit at the mounting interface and supports the stable alignment needed for consistent shooting results. The 0 MOA inclination keeps the setup neutral, which is appropriate for standard hunting rifle applications where the optic does not need additional forward cant for extended elevation travel.

As part of the EAW Pivot Mounts family, this front base is intended to work within a modular mounting concept rather than as a standalone universal part. On a Sauer 202 Medium, it provides the rifle-specific foundation for a detachable mount that prioritizes clean handling, dependable reinstallation, and compatibility with the established EAW pivot system.

About EAW

EAW traces its origins to 1919, when Ernst Apel founded the company in Würzburg, Germany. The business developed its first riflescope mounts in 1945, and since 1951 the development and production of riflescope mounts have been its primary focus. That long specialization is central to the brand’s reputation in the hunting and shooting market, where EAW is closely associated with mechanically precise mounting solutions.

Over time, the company expanded its range to include pivot, slide-on or roll-off, and claw mounts for riflescopes, reflecting a strong emphasis on rifle-specific mounting systems rather than generic one-size-fits-all designs. Production moved from Würzburg to Gerbrunn in 1970, and Ernst Apel GmbH is now headquartered in Eibelstadt, Germany. In addition to mounts, EAW also offers thermal imaging cameras, but its core identity remains firmly rooted in optic mounting technology for sporting and hunting firearms.

Main Features

• Manufacturer: EAW
• Product type: Front pivot base
• Mount series: EAW Pivot Mounts
• Compatibility: Sauer 202 Medium
• Material: Steel
• Inclination: 0 MOA
• Made in: Germany

Warranty

2 years. This EAW front pivot base is supplied with a 2-year warranty.