Redding Type S Bushing Neck Sizing Die .300 PRC

• Interchangeable bushing system: The Type S design lets the reloader tune neck tension by selecting the appropriate bushing, which helps match brass, bullet and chamber dimensions more precisely for consistent bullet release.
• Neck sizing only: By sizing the neck instead of working the full case body, this die helps preserve fire-formed case fit in the chamber, which can support accuracy and reduce unnecessary brass working.
• Adjustable decapping rod: The decapping rod can be positioned to resize only part of the neck length if desired, giving experienced handloaders another way to fine-tune case preparation for a specific rifle.
• Steel die construction: The hardened steel body is built for repeated use while maintaining dimensional consistency, which matters when loading batches of rifle ammunition to the same standard.
• Standard press fit: With a 7/8"-14 thread, the die fits common reloading presses, making it easy to integrate into an established handloading setup for .300 PRC.

About the Type S Series

Redding Type S dies are built for handloaders who want more control over case neck tension than a conventional fixed-dimension sizing die can provide. Within Redding’s rifle-die lineup, the Type S series sits as a precision-focused option for shooters loading for accuracy, whether for hunting rifles, long-range target work or carefully tuned match ammunition. The defining feature is the use of interchangeable neck bushings, which allow the user to choose how much the neck is sized instead of relying on a one-size-fits-all internal dimension.

That approach reduces unnecessary working of the brass and gives the reloader a practical way to balance neck grip, concentricity and case life. Depending on the die version, the series includes neck-sizing and full-length sizing formats, and it is supported by steel and TiN-coated bushings in fine increments. The design also uses an adjustable decapping rod, allowing the bushing position to be set for full or partial neck sizing. In practice, the Type S family is aimed at reloaders who want repeatable ammunition dimensions and the flexibility to adapt loads to a specific chamber rather than loading every case to a fixed generic standard.

About the Redding Type S Bushing Neck Sizing Die .300 PRC

The Redding Type S Bushing Neck Sizing Die .300 PRC is a single rifle die made for reloaders who want to size only the neck of their .300 PRC cases while keeping close control over neck tension. That makes it particularly relevant for shooters loading ammunition for one rifle and working with brass that has already been fire-formed to that chamber. By avoiding full-length sizing during every loading cycle, the die can help reduce case working and preserve a more consistent case-to-chamber fit.

Its Type S bushing system is the key advantage. Because the neck sizing bushing is selected separately, the die can be tailored to the brass and bullet combination rather than forcing every case through a fixed neck dimension. For precision rifle loading, that matters because neck tension influences bullet seating feel, release consistency and ultimately the uniformity of loaded rounds. The die also performs decapping and neck sizing in one operation, keeping the loading sequence straightforward.

Redding’s design includes an adjustable decapping rod, which allows the bushing to be positioned for partial neck sizing if the reloader wants to leave part of the neck untouched. For experienced handloaders, that adds another level of control when tuning ammunition to a specific chamber. The steel construction and standard 7/8"-14 thread make the die suitable for regular bench use on common presses, while the bottle-neck rifle case geometry and .308 bullet diameter compatibility align it with the demands of modern .300 PRC precision and hunting loads.

About Redding

Redding Reloading Equipment was founded by Burr Bement in 1946 in Virgil, New York. The company focuses on tools for handloading ammunition and has built its reputation around reloading dies, presses, powder measures, scales and case-preparation equipment. Redding is particularly well known among rifle reloaders for precision-oriented die systems, including its Type S bushing dies and Competition series dies, which are designed to give the user more control over case sizing and bullet seating.

The company was incorporated as Redding-Hunter, Inc. in 1956 and later began marketing its products under the Redding Reloading Equipment name in the 1960s. Today, with headquarters in Cortland, New York, Redding remains closely associated with American-made reloading equipment for shooters who want repeatable, carefully controlled ammunition assembly.

Main Features

• Manufacturer: Redding
• Made in: USA
• Die operation: Decapping, Neck sizing
• Pack size: Single
• Die type: Bushing
• Bushing: Yes
• Bushing style: Type S - Bushing Neck Die
• Case body design: Bottle neck
• Case type: Rifle
• Sizing die material: Steel
• Material: Steel
• Adjustment: Standard
• Press compatibility: Standard 7/8"-14 thread
• Bullet diameter: 7.82 mm
• Bullet diameter: 308.00 inch
• Compatible calibers: .300 Precision Rifle Cartridge, .300 PRC

Warranty

2 years. This Redding reloading die is covered by a 2-year warranty period.

In the Box

• Redding Type S Bushing Neck Sizing Die
• Decapping rod assembly
• Size button
• Decapping pin
• Lock ring