Hawke Frontier ED X 10x32

• Extra-Low Dispersion Glass with Dielectric Coated BAK-4 Roof Prisms: The Frontier ED X 10x32 uses Extra-Low Dispersion (ED) glass in the lens elements to reduce chromatic aberration and colour fringing on high-contrast subjects. The BAK-4 roof prisms carry dielectric mirror coatings for maximum light reflectivity and transmission through the prism stage, combined with phase correction to maintain resolution and contrast across the full aperture at 10× magnification.
• 10× Magnification for Extended Target Identification: The 10× magnification provides greater image scale than the 8×32 model for more detailed target and subject identification at distance — relevant for birding, wildlife observation, and hunting applications where the additional resolving power of 10× supports more accurate identification of fine detail. The field of view of 108 metres at 1,000 metres and apparent field of view of 62° remain broad enough for comfortable extended glassing despite the higher magnification.
• Compact 32mm Objective — Lightweight and Packable: The 32mm objective lens keeps the overall weight at just 540 g and the dimensions compact at 100–118 mm wide × 120 mm high — identical to the 8×32 variant — making the 10×32 one of the most packable high-magnification binoculars in the Frontier ED X range. The compact format suits travel, hiking, and any application where minimising weight and pack volume is a priority.
• Magnesium Alloy Chassis with Tripod Thread and Stay-On Lens Covers: The body is constructed from magnesium alloy with rubber armour, providing structural rigidity at lower weight than equivalent aluminium designs. The chassis is nitrogen purged, waterproof, and fogproof, with a built-in ¼"-20 UNC tripod mounting thread — particularly relevant for a 10× binocular, where image steadiness at higher magnification benefits from tripod support during extended stationary observation. Stay-on lens covers remain attached to the body during use.
• Replaceable Twist-Up Eyecups with Position Stops: The replaceable twist-up eyecups with position stops accommodate both bare-eyed and eyeglass-wearing users, with defined click positions ensuring a consistent eye relief setting during extended use. At 15mm of eye relief, the binocular is comfortable for eyeglass wearers at 10× magnification.

About the Frontier ED X Binocular Series

The Frontier ED X series is Hawke's primary H7-tier binocular range, built on the H7 optical system with Extra-Low Dispersion (ED) glass, dielectric mirror coated BAK-4 roof prisms, and phase correction as standard across all models. The series is designed for hunters, birders, nature observers, and outdoor enthusiasts who want high optical performance and versatility in a compact, lightweight format.

All Frontier ED X models feature water-repellent fully multi-coated lenses, a magnesium alloy chassis with nitrogen purging and waterproof sealing, replaceable twist-up eyecups with position stops, stay-on lens covers, and a built-in ¼"-20 UNC tripod mounting thread. The series spans compact 32mm and full-size 42mm configurations across 8× and 10× magnifications, available in both green and grey finishes. The Frontier ED X sits one tier below the Frontier APO, sharing the same prism and coating specification without the APO lens correction of the flagship model.

About the Model (Hawke Frontier ED X 10x32)

The Hawke Frontier ED X 10x32 is a compact, lightweight binocular designed for birders, hunters, and nature observers who require higher magnification than the 8×32 provides while maintaining the same compact dimensions and weight. The 10× magnification with a 32mm objective lens delivers a field of view of 108 metres at 1,000 metres and an apparent field of view of 62° — providing a broad, comfortable sight picture despite the higher power. At 540 g and 100–118 mm wide × 120 mm high, the dimensions are identical to the 8×32, making it equally suited to travel and extended carry.

The ED glass lens elements reduce chromatic aberration and colour fringing for a clean, neutrally rendered image at 10×. The dielectric mirror coated BAK-4 roof prisms with phase correction maximise light transmission and resolution through the prism system. The water-repellent fully multi-coated lenses maintain high transmission in rain and wet conditions. An exit pupil of 3.2mm and 15mm of eye relief support comfortable use in typical outdoor lighting conditions.

The binocular is available in two colour finishes: Green (art. no. 38407) and Grey (art. no. 38408). The close focus distance of 3 metres accommodates close-range subject observation. The built-in ¼"-20 UNC tripod mounting thread supports use on a tripod or binocular mount for steadier viewing at 10×. The magnesium alloy chassis is nitrogen purged, waterproof, and fogproof.

About Hawke

Hawke Optics is a British optics brand registered in England and Wales, with products distributed across Europe, North America, and international markets. The company produces a broad range of optical products including riflescopes, airgun scopes, crossbow scopes, red dot sights, reflex sights, binoculars, spotting scopes, and laser rangefinders, covering applications from hunting and precision shooting to nature observation and marine use.

Hawke organises its product lineup into distinct optical system tiers — from the entry-level H2 through H5 to the flagship H7. The Frontier series represents the H7 tier, Hawke's highest optical specification, covering riflescopes, red dot sights, reflex sights, rangefinding binoculars, binoculars, and spotting scopes.

Main Features

• Magnification: 10×
• Objective Lens Diameter: 32 mm
• Prism System: BAK-4 Roof Prism, Phase Corrected
• Prism Coating: Dielectric Mirror Coating
• Lens Type: Extra-Low Dispersion (ED) Glass
• Field of View: 108 m @ 1,000 m / 324 ft @ 1,000 yds
• Apparent Field of View: 62°
• Eye Relief: 15 mm
• Exit Pupil: 3.2 mm
• Close Focus Distance: 3 m / 9.8 ft
• Interpupillary Distance: 56–74 mm
• Dioptre Adjustment: Right Eye
• Eyecups: Twist-Up, Replaceable, with Position Stops
• Tripod Mounting Thread: Yes (¼"-20 UNC)
• Lens Coating: Wide-Band / Anti-Reflection / Fully Multi-Coated, Water-Repellent Coating (external surfaces)
• Optical System: H7
• Housing: Magnesium alloy, rubber armour
• Construction: Nitrogen purged, waterproof, fogproof
• Dimensions (W × H): 100–118 × 120 mm
• Weight: 540 g
• Colour: Green (38407) / Grey (38408)

Warranty

The binoculars are covered by a 10-year warranty.

In the Box

• Binoculars
• Protective Carry Case
• Protective Pouch
• Carry Case Strap
• Harness Adaptors
• Neck Strap
• Objective Lens Covers (Stay-On)
• Ocular Lens Covers
• Lens Cloth
• Quality Assured Booklet
• Instruction Manual