Warne Maxima Vertical-Split QD Rings for Tikka, 25.4 mm

• Quick-detach lever system: The Maxima QD design lets the optic come off the rifle and go back on without turning the setup into a full re-zero job, which is useful when switching optics or transporting the rifle.
• Vertical-split steel rings: The vertically split construction gives the rings a strong, even grip on a 25.4 mm (1 inch) scope tube and helps the mount stay secure under recoil.
• Direct Tikka dovetail fit: These rings clamp straight to the rifle’s integral Tikka dovetail, so there is no separate base to add, keeping the setup simpler and lower over the action.
• Tikka-specific recoil interface: The model-specific fit is machined for compatible Tikka-pattern receivers, helping the rings seat correctly and resist movement during repeated firing.
• Made in USA: Domestic manufacturing and Warne’s long focus on scope-mount systems make this a practical choice for shooters who want a proven steel mounting solution for hunting optics.

About the Warne Tikka Mounts Series

Warne Tikka Mounts are built around the idea of using the rifle’s own dovetail interface rather than adding extra mounting layers. In Warne’s lineup, this series covers Tikka-specific rings and rails for shooters who want a direct-fit solution matched to the receiver geometry of compatible rifles. The family includes both fixed and quick-detach Maxima Tikka rings, along with Tikka rails for users who prefer a rail-based setup.

Within the series, the Maxima Tikka models stand out for their direct-to-dovetail mounting and recoil-focused design. They are intended for practical field rifles, hunting rifles, and general-purpose sporting setups where secure scope retention matters as much as keeping the mounting system straightforward. Depending on the version, the series is offered in 1-inch and 30 mm tube sizes and in different heights to suit common riflescope formats. The result is a product family that emphasizes solid fit, simple installation, and a low-profile mounting arrangement tailored to Tikka-pattern actions.

About the Warne Maxima Vertical-Split QD Rings for Tikka, 25.4 mm

The Warne Maxima Vertical-Split QD Rings for Tikka, 25.4 mm are designed for shooters who want a direct-fit steel ring set for a 25.4 mm (1 inch) riflescope on a compatible Tikka-pattern dovetail. Because the rings mount straight to the receiver, the setup stays mechanically simple and avoids the added height and extra interfaces that come with a separate base. That lower, cleaner arrangement is often preferred on hunting rifles where balance, cheek weld, and dependable field handling matter.

What makes this model especially useful is its combination of quick-detach operation and vertical-split ring construction. The QD lever system is suited to rifles that may alternate between optics, or for shooters who want to remove a scope for transport or maintenance and reinstall it with minimal disruption to the established zero. The vertical-split design gives the steel rings a firm hold on the scope tube while also suiting heavier optics and rifles that generate meaningful recoil.

As part of the Maxima Tikka pattern, these rings are machined for the rifle’s dovetail rather than as a universal fit. That model-specific approach helps the mount seat correctly and stay consistent in use. For a traditional 1-inch hunting scope on a Tikka-compatible rifle, this ring set offers a practical mix of direct attachment, repeatable removal, and the durability expected from a steel mounting system made in the USA.

About Warne

Warne Manufacturing Company was founded in February 1991 and is based in Tualatin, Oregon, United States. The company focuses on mounting systems for the shooting sports industry, with product lines that cover scope rings, bases, rails, and related hardware for sporting and precision rifle use. Its current mount families include Maxima, Mountain Tech, and Skyline, each aimed at different rifle and optic applications.

Warne’s background is closely tied to practical scope-mount design, and the company’s history also traces back to Sporting Arms Limited, founded in January 1947 in Adelaide, South Australia. Across its product range, Warne is known for building mounts around secure recoil control, model-specific fit where needed, and materials chosen for the intended role. That focus is especially relevant in products such as the Maxima series, where steel construction and direct-fit geometry are central to long-term reliability on hard-used rifles.

Main Features

• Manufacturer: Warne
• Mount series: Warne Tikka Mounts
• Mount type: Detachable mounts
• Scope compatibility: 25.4 mm - 1"
• Made in: USA
• Compatibility Above: 25.4 mm (1 inch)
• Compatibility Below: Lynx Light Hunter MA, Lynx Light Hunter SA, Lynx 94 MA, Lynx 94 LA, Lynx 94 SA, Lynx TD 21 MA, Lynx TD 21 LA, Lynx TD 15 LA, Lynx TD 15 MA, Lynx TD 12 LA, Lynx TD 12 MA, Sako TRG 21/41, Sako TRG 22/42, Sako 90 XS Optilock, Sako 90 S Optilock, Sako 90 SM Optilock, Sako 90 M Optilock, Sako 90 L Optilock, Tikka M55, Tikka M65, Tikka M558, Tikka M590, Tikka M595, Tikka M690

Warranty

Warne provides a 10-year warranty for this mount. That term gives added reassurance for a component that is central to scope retention, repeatable alignment, and long-term field use.