Optilock Scope Mount Rings, Tikka - Sako, 25.4 mm - Rings Only

• 25.4 mm ring size: Built for 1 inch scope tubes, these rings provide the correct fit for a wide range of traditional hunting optics without shims or improvised inserts.
• Optilock interface compatibility: The rings fit the Ø 7 mm Optilock-style interface, making them suitable for Sako and Tikka mounting setups that use separate bases and allowing a clean, secure installation.
• Aluminium construction: The lightweight housing helps keep overall rifle weight under control while still providing the rigidity needed for a stable scope mount in field use.
• Made in Finland: Finnish manufacture reflects the Sako and Tikka design tradition, with components intended to match the fit and handling expectations of these rifle platforms.
• Zero extension design: With KR 0.0 mm extension, the rings keep the scope centered over the mounting point, which suits conventional scope lengths and straightforward eye-relief positioning.

About the Sako Optilock Rings Series

Sako Optilock Rings are designed as part of the mounting system used on Sako and Tikka rifles, with a focus on secure scope installation and protection of the optic itself. A defining feature of the series is the use of copolymer inserts that surround the scope tube. Instead of concentrating pressure at a few hard contact points, these inserts spread clamping force more evenly, which helps reduce the risk of marking or stressing the tube during mounting.

The series covers common scope tube diameters such as 25.4 mm and 30 mm, and it is offered in several height options so the setup can be matched to the scope’s objective size and the rifle’s geometry. Within the wider Optilock family, there are versions intended for separate bases as well as one-piece ringmount configurations, giving the system flexibility across different Sako and Tikka platforms. The overall design philosophy is practical: solid alignment, repeatable mounting, and a scope-to-rifle fit that supports typical hunting and sporting use without unnecessary complexity.

About the Optilock Scope Mount Rings, Tikka - Sako, 25.4 mm - Rings Only

The Optilock Scope Mount Rings, Tikka - Sako, 25.4 mm - Rings Only are intended for shooters using a 1 inch riflescope tube on a Sako or Tikka-compatible mounting setup with a Ø 7 mm interface. As a rings-only configuration, this model is suited to users who already have the appropriate bases and need the upper mounting component matched to their scope tube diameter. That makes it a practical choice when replacing rings, changing optics, or building a rifle around an existing Optilock-style base system.

The aluminium construction keeps the mounting solution relatively light, which is useful on hunting rifles where balance and carry weight matter over a long day in the field. The KR 0.0 mm extension indicates a non-extended layout, so the rings keep the optic in a conventional position over the action. This works well with many standard scope bodies and supports a straightforward mounting geometry when eye relief can be achieved without offset.

Because these rings are part of the Optilock system developed for Sako and Tikka rifles, they are aimed at shooters who want a mounting solution that matches the rifle platform rather than relying on a more generic fit. In practice, that means a cleaner interface, dependable scope support, and a setup appropriate for hunting optics where secure alignment and protection of the scope tube are both important.

About Optilock

Optilock is Sako’s line of rifle scope mounts, bases, and rings, developed specifically for use with Sako and Tikka rifles. The range focuses on the mechanical side of scope installation: giving these rifles a mounting system that matches their receiver interfaces and supports reliable optic alignment in hunting and sporting use. Across the line, Optilock products are offered in different diameters, heights, and mounting formats so they can be matched to a wide variety of scopes and rifle configurations.

A key characteristic of the system is the use of polymer inserts in the rings. These inserts help distribute clamping force around the scope tube and reduce the chance of surface damage during installation. Within the broader family, Optilock bases and rings are also known for robust machined construction, including steel versions in other configurations, reflecting Sako’s long-standing emphasis on practical, rifle-specific mounting solutions rather than one-size-fits-all hardware.

Main Features

• Manufacturer: Optilock
• Mount series: Sako Optilock Rings
• Made in: Finland
• Material: Aluminium
• Extension (KR): KR 0.0 mm
• Scope / Sight type: 25.4 mm - 1"
• Compatibility Above: 25.4 mm (1 inch)
• Compatibility Below: EAW Ø 7 mm Interface
• Compatibility Below: Optilock Ø 7 mm Interface
• Compatibility Below: Osuma Ø 7 mm Interface
• Compatibility Below: Recknagel Ø 7 mm Interface

Warranty

2 years. This mount ring set is covered by a 2-year warranty.