Nanuk 970 Case for DJI Inspire 2

• Custom DJI Inspire 2 fit: The Nanuk 970 Case for DJI Inspire 2 is built around a large 610.00 mm x 610.00 mm x 361.00 mm interior, giving a protected, organized space for a professional drone kit rather than loose transport in soft luggage.
• NK-7 resin shell: The hard shell uses NK-7 resin, which helps the case resist impact and rough handling during travel, field deployment and storage while keeping valuable equipment better protected.
• Waterproof and pressure-managed design: IP67 protection and an automatic pressure equalization valve help keep water, dust and pressure changes from compromising sensitive electronics when moving between vehicles, locations and elevations.
• Foam and organizer interior: The combination of Cubed Foam + Organizer makes it easier to separate aircraft components, accessories and support gear, reducing movement inside the case and speeding up packing after use.
• Tested transport durability: Compliance with ASTM D-4169 DC-18, ATA Specification 300 and MIL-STD-810F immersion shows that the case is designed for repeated transport stress, including drops, vibration and wet conditions.

About the 970 Series

The Nanuk 970 Series sits in the large-format end of the brand’s protective-case range, built for users who need substantial internal volume and a hard case that can handle demanding transport conditions. It is aimed at professionals moving larger equipment sets such as commercial drones, camera systems, technical instruments and other sensitive gear that cannot be left exposed to impact, moisture or dust. The series combines a spacious footprint with the brand’s established protective-case design, including a shell made from NK-7 resin, an automatic pressure release valve and the PowerClaw latching system.

In practical use, the 970 format is less about compact carry and more about secure storage, organized transport and dependable protection for bulky or high-value equipment. Its deep interior allows foam-based layouts or organizer-based setups that suit mission-specific kits, while the hard-sided construction helps the case hold its shape under load and during repeated handling. For users in field production, inspection work, drone operations or technical support roles, the 970 Series is designed to keep equipment protected, separated and ready to deploy after transit.

About the Nanuk 970 Case for DJI Inspire 2

The Nanuk 970 Case for DJI Inspire 2 is configured for transporting a professional drone platform in a single protective hard case with the space needed for both the aircraft and supporting equipment. Its 610.00 mm x 610.00 mm x 361.00 mm internal dimensions and 133.94 l volume give it the capacity expected for a larger aerial system, while the Cubed Foam + Organizer interior helps keep components stable and separated instead of shifting together during transport. That matters when carrying sensitive flight hardware, batteries, controllers and mission accessories that need to arrive ready for use.

The shell is made from NK-7 resin, a material chosen for hard-use protective cases because it balances rigidity, impact resistance and manageable weight. At 11920.00 g, this is a substantial equipment case, but that mass supports the level of protection expected for professional electronics and transport-sensitive gear. The case also includes a pressure equalization valve, which helps when moving between changing elevations or after air travel by reducing the effort needed to open the case while maintaining a sealed environment.

For field and transport durability, the case is waterproof, shockproof and rated to IP67, with additional test references including ASTM D-4169 DC-18, ATA Specification 300 and MIL-STD-810F immersion. Two lock hasps add a straightforward security option, and the hard-sided format makes the case suitable for vehicle transport, storage rooms, production environments and travel where a soft bag would leave the drone system more exposed.

About Nanuk

Plasticase began manufacturing plastic cases in 1984 under the name Resentel Ltd., and NANUK is the company’s protective-case brand. The business designs and manufactures injection-molded plastic protective cases, with production centered at Plasticase’s factory in Quebec, Canada. Within the range, NANUK cases are known for the brand’s PowerClaw latching system and for shells made from NK-7 resin, both of which are directly relevant to hard-use transport and equipment protection.

The product line covers a broad mix of applications, including cases for cameras, drones, firearms and outdoor equipment. That focus gives Nanuk a clear specialization in protective storage for gear that is expensive, fragile or regularly exposed to demanding travel conditions. In this category, the brand’s reputation is built on durable molded construction, practical sealing features and case formats designed around real equipment layouts rather than generic storage alone.

Main Features

• Manufacturer: Nanuk
• Made in: Canada
• Weight: 11920.00 g
• External dimensions: 699.00 mm x 691.00 mm x 406.00 mm
• Internal dimensions: 610.00 mm x 610.00 mm x 361.00 mm
• Volume: 133.94 l
• Outer material: NK-7 resin
• Inner material: Cubed Foam + Organizer
• Color: Black
• Handle: Yes
• Wheels: No
• Lock hasps: 2 Lock Hasps
• Pressure equalization valve: Yes
• Waterproof: Yes
• Shockproof: Yes
• Certificates: ASTM D-4169 DC-18 - drop test, ASTM D-4169 DC-18 - rainfall, ASTM D-4169 DC-18 - vibration, ATA Specification 300, IP67, MIL-STD-810F - immersion

Warranty

This case is covered by a 2-year warranty. The stated period provides defined manufacturer support for defects in materials and workmanship during normal use.