Mauser Single Ring, 25.4 mm

• Steel construction: The ring uses a steel body for a rigid, durable connection between scope and rifle, helping the optic stay aligned under repeated recoil and regular field use.
• 25.4 mm / 1 inch scope fit: Built for classic 1 inch scope tubes, this ring supports a wide range of traditional hunting optics while keeping the installation matched to the tube diameter.
• Mauser M03 mounting concept: As part of the Mauser Mounts system for the Mauser M03, it works within a quick-detachable platform designed for repeatable removal and reinstallation.
• Ø 8 mm interface compatibility: The ring is made for the common Ø 8 mm upper-part interface used across several mount makers, which makes it a practical replacement or matching component in an existing setup.
• KR 0.0 mm extension: The non-extended layout keeps the ring position straightforward and compact, which suits standard scope placement where no additional forward or rearward offset is needed.

About the Mauser Mounts Series

Mauser Mounts are built around the mounting system developed for the Mauser M03, a rifle platform that uses pre-installed Double Square Mount bases on the action. Within this system, the scope mount attaches by means of two locking levers, allowing the optic assembly to be removed and reinstalled without turning the rifle into a workshop project. That approach suits hunters who want to alternate between different optics or remove a scope for transport while keeping the mounting process fast and consistent.

The series includes several upper-part configurations, from 25.4 mm scope rings to interfaces for Swarovski SR and Zeiss VM/ZM rails, as well as Picatinny-based options. The common idea across the range is a secure mechanical fit matched to the M03 rifle rather than a universal one-size-fits-all solution. In practice, that gives the series a clear role in hunting optics: it provides model-specific mounting parts for shooters who value repeatable positioning, straightforward handling and compatibility with different optic formats.

About the Mauser Single Ring, 25.4 mm

The Mauser Single Ring, 25.4 mm is an upper mounting component intended for 1 inch scope tubes in an M03-compatible setup. Its role is simple but important: it forms one half of the ring arrangement that secures the riflescope to the mount body, so correct fit and material strength matter directly to long-term stability. By using a ring sized specifically for 25.4 mm tubes, the mount supports even clamping pressure and helps avoid the compromises that come with mismatched inserts or improvised solutions.

The ring is made from steel, which suits a hunting rifle mount where resistance to movement, wear and repeated recoil cycles is more important than saving a small amount of weight. The black finish keeps the appearance subdued and matches typical riflescope and rifle hardware. With KR 0.0 mm extension, this version follows a standard, non-offset layout, making it appropriate where the scope already achieves proper eye relief and balance without additional extension. Compatibility with the Ø 8 mm interface used by Mauser and several other mount makers also makes it a useful replacement part when maintaining or completing an existing mount assembly. In practical terms, this is a purpose-built ring for shooters who want a correct 1 inch fit within the Mauser M03 mounting system rather than a generic ring adapted to the job.

About Mauser

Mauser traces its roots to the Royal Württemberg Rifle Factory, established in 1811 in Oberndorf am Neckar. The Mauser name itself took shape when Gebr. Mauser & Cie. was established there in 1874 by Wilhelm and Paul Mauser. The company is closely associated with sporting and hunting rifles, and the MAUSER 98 locking system introduced in 1898 became one of the defining mechanical foundations for later Mauser rifle designs.

Today, MAUSER is headquartered in Isny im Allgäu, Germany and focuses on hunting rifles and related rifle accessories. Among the design traits linked with the brand is the double-square bridge, a characteristic feature of Mauser rifles and a relevant part of the mounting concept used on models such as the M03. In 2000, Lüke & Ortmeier acquired the MAUSER and J.P. Sauer & Sohn brands from SIG, continuing the brand within the modern hunting-arms market.

Main Features

• Manufacturer: Mauser
• Mount Series: Mauser Mounts
• Made in: Germany
• Material: Steel
• Extension (KR): KR 0.0 mm
• Scope / Sight Type: 25.4 mm - 1"
• Bubble Level: No
• Color: Black
• Compatibility Above: 25.4 mm (1 inch)
• Compatibility Below: INNOmount Ø 8 mm Interface, Henneberger Ø 8 mm Interface, MAK Ø 8 mm Interface, Kozap Ø 8 mm Interface, Mauser Ø 8 mm Interface, Recknagel Ø 8 mm Interface, Dentler Ø 8 mm Interface

Warranty

Mauser provides a 10-year warranty. For this product page, the stated warranty period is 10 years.