INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 36 mm

• 36 mm ring interface: Built for large-tube optics, this mount gives a secure fit for 36 mm riflescopes while keeping the setup properly aligned on a Weaver or Picatinny rail.
• Two-piece construction: Separate rings leave more room around the action and loading area, which helps when fitting different scope lengths and maintaining access to the rifle.
• 0° inclination: The straight, non-canted design suits general hunting and sporting setups where a neutral mounting position is preferred and no additional elevation bias is needed.
• Aluminium body: The mount keeps weight under control while still providing the rigidity needed for repeatable optic positioning on hard-use rifles.
• Weaver / Picatinny compatibility: The cross-platform base fit makes it easy to use the mount across rifles and chassis systems that share the common rail standard.

About the INNOmount Two-Piece Mounts Series

INNOmount Two-Piece Mounts are designed as a modular mounting family for shooters who want a clean, adaptable way to fit optics to common rail systems. The series includes versions for Weaver/Picatinny bases, making it relevant for both sporting rifles and more tactical rifle platforms. Across the range, the two-piece layout gives flexibility in ring placement, which is useful when working with different tube lengths, turret positions, and action geometries.

Within the broader INNOmount lineup, this series sits as a practical ring-based solution that focuses on secure optic support without the bulk of a one-piece bridge mount. The family is offered in several ring diameters from 25.4 mm to 40 mm, so it covers traditional hunting scopes as well as larger modern optics. Quick-detach variants in the series use recessed locking levers operated by thumb buttons, a layout intended to reduce accidental release while keeping handling straightforward. That combination of modular fit, rail compatibility, and straightforward mechanical design makes the series well suited to shooters who value repeatable mounting and broad rifle compatibility.

About the INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 36 mm

The INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 36 mm is a dedicated ring mount for riflescopes with a 36 mm main tube. That makes it especially relevant for larger premium optics that need more mounting surface and a stable interface than smaller ring sizes can provide. By using a two-piece format rather than a one-piece bridge, the mount gives more freedom to position the scope correctly for eye relief and turret clearance, while also keeping the loading and ejection area more open.

The 0° inclination is a practical choice for rifles set up around standard zeroing distances and general-purpose field use. It keeps the optic in a neutral position relative to the bore, which suits hunting rifles, sporting rifles, and many rail-equipped precision setups where added cant is not required. Because the mount fits Weaver and Picatinny rails, it can be used across a wide range of rifles and chassis systems, including many factory and aftermarket rail-equipped platforms.

Its aluminium construction balances strength and weight, helping maintain a solid optic-to-rifle connection without adding unnecessary mass high on the firearm. The black finish keeps the appearance understated and consistent with modern riflescope and rail hardware. With no windage adjustment and no integrated bubble level, the design stays focused on the essentials: a direct, stable, repeatable mounting solution for shooters who need a straightforward 36 mm ring set for a rail-based rifle.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG. The company is based in Fuchsstadt, Germany, where it manufactures hunting rifles, riflescope mounts, and red-dot sights. Within this product area, INNOmount is known for offering both quick-clamping and fixed rifle mounts, covering common rail interfaces as well as rifle-specific mounting solutions.

The brand's range includes mounts for Weaver/Picatinny rails and extends across several formats, including tactical, swing, and tilt-up designs. INNOmount also supports a broad spread of optic interfaces and ring diameters, which reflects a focus on practical compatibility for modern sporting and hunting rifles. That specialization in mounting systems makes the brand particularly relevant to shooters who want German-made scope mounting hardware matched to specific rifles, rails, and optic tube sizes.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Two-Piece Mounts
• Made in: Germany
• Warranty: 10 years
• Scope / sight type: 36 mm
• Inclination: 0°
• Windage adjustable: No
• Bubble level: No
• Color: Black
• Material: Aluminium
• Compatibility above: 36 mm
• Compatibility below: Picatinny Rail, Accuracy International AX308, Accuracy International AX50, Accuracy International AXMC, Accuracy International AT308, Anschutz 1771, Anschutz 1782, Baikal 121 Lis, Baikal 145 Los, Baikal 141 Sobol, Baikal 161 Manul, Baikal MP-161K, Benelli Lupo (weaver), Beretta ARX 100, Beretta ARX 160, Beretta ARX 200, Beretta Rx4 Storm, Beretta Cx4 Storm, Beretta BRX1 (Picatinny), CZ 512 Tactical, CZ 557 Varmint, CZ 557 Range Rifle, CZ 600 Trail, CZ 600 Alpha (Mini)

Warranty

INNOmount states a 10-year warranty for mounts. This gives long-term support for a component that is central to maintaining a secure and repeatable optic installation.