Hawke Match Mount 25.4 mm, 11 mm Dovetail

• 25.4 mm (1 inch) ring size: Built for 1-inch scope tubes, this mount gives a correct, stable fit that helps maintain alignment and reduces the risk of uneven clamping pressure.
• 11 mm dovetail interface: Designed for rifles with an 11 mm rail, it provides a direct mounting solution for many rimfire and airgun platforms without adding unnecessary bulk.
• Aluminium construction: The aluminium body keeps weight down while still providing the rigidity needed for consistent scope support in regular field and range use.
• Hex-screw ring design: Hex screws secure the scope firmly in place, making installation straightforward and helping the optic stay settled under repeated recoil and handling.
• Matte black finish: The black anodized finish gives the mount a low-reflection surface and adds everyday resistance to wear from mounting, transport, and outdoor use.

About the Hawke Match Mounts Series

Hawke Match Mounts are a practical mounting series built for shooters who want a straightforward, dependable way to fit a riflescope to common rail types. The range is designed to work with either 9–11 mm dovetail or Weaver rails, which makes it relevant across many rimfire, airgun, and centerfire setups. Within the series, Hawke offers versions for both 25.4 mm (1-inch) and 30 mm scope tubes, along with two-piece rings and one-piece mounts to suit different rifle layouts and optic lengths.

The design philosophy is simple: keep the mount secure, keep weight sensible, and avoid unnecessary complexity. The mounts are made from aluminum with a matte-black anodized finish, and the rings use hex screws for a firm hold. On dovetail models, a recoil-stop pin helps resist movement on suitable rails, while the Weaver versions use a crossbar for added security. Hawke also uses internal cushion tape intended to help prevent marking and damage to the scope tube. The result is a series aimed at shooters who need reliable scope mounting for hunting optics, target rifles, and general sporting use.

About the Hawke Match Mount 25.4 mm, 11 mm Dovetail

The Hawke Match Mount 25.4 mm, 11 mm Dovetail is a fixed two-piece scope mount made for rifles fitted with an 11 mm dovetail and optics using a 25.4 mm (1 inch) main tube. That combination makes it especially relevant for rimfire rifles and air rifles, where a direct dovetail fit is often preferred for its simplicity and low profile. With 0 MOA inclination, the mount keeps the optic in a neutral position, which suits conventional zeroing distances and general-purpose shooting where no built-in elevation bias is needed.

The mount body is made from aluminium, giving it a good balance between strength and manageable weight. In practice, that means the rifle gains secure scope support without becoming unnecessarily heavy or top-loaded. The fixed, non-extended layout with KR 0.0 mm extension keeps the setup compact and is well suited to rifles and scopes that already offer the correct eye-relief position without offset mounting.

This model does not use windage-adjustable bases, so alignment remains straightforward and installation stays simple. That appeals to shooters who want a clean, conventional mounting solution with fewer moving parts. Finished in black, it matches most riflescopes and actions discreetly, making it a sensible choice for sporting rifles where dependable fit, tidy proportions, and uncomplicated scope mounting matter more than extra adjustment features.

About Hawke

Hawke is a sporting optics manufacturer headquartered in the United Kingdom. The company focuses on practical field and shooting optics, producing riflescopes, binoculars, spotting scopes, and laser rangefinders for hunting, target shooting, and general outdoor use. Its riflescope lineup includes established families such as Frontier, Sidewinder, Endurance, Airmax, and Vantage, covering everything from entry-level setups to more specialized long-range and airgun optics.

Hawke is particularly well known for building optics around clear application-specific designs. Its riflescopes are offered in both first-focal-plane and second-focal-plane formats, and the company has also developed category-specific products for crossbows, shotguns, and airguns. In the binocular segment, the Frontier ED X range introduced in 2018 brought together extra-low-dispersion glass and dielectric prism coatings, reflecting Hawke’s broader emphasis on useful optical performance rather than unnecessary complication.

Main Features

• Manufacturer: Hawke
• Series: Hawke Match Mounts
• Made in: China
• Scope / sight type: 25.4 mm - 1"
• Rail fit: 11 mm dovetail
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: No
• Material: Aluminium
• Color: Black

Warranty

10 years. This mount is covered by a ten-year warranty, providing defined long-term support for normal ownership and use.