EGW Scope Mount Extrusion 609mm

• 24" extrusion length: The long blank gives gunsmiths enough material to cut one or several custom bases from a single piece, which helps reduce waste and keeps receiver-specific machining flexible.
• Pre-profiled Picatinny form: Starting with an EGW rail extrusion saves time compared with machining a base entirely from raw stock, while still leaving the underside, hole pattern and final length open for a custom fit.
• 6061 aluminum construction: The aluminum body keeps weight down and machines cleanly, making it a practical choice for custom hunting optics and general-purpose rifle builds.
• 0 MOA geometry: A flat rail profile suits rifles that do not need built-in elevation, keeping scope setup straightforward for standard zeroing distances and versatile optic placement.
• 16.51 mm height: The extrusion provides the established EGW rail profile as a starting point, helping builders maintain familiar ring and optic alignment while finishing a mount to the rifle.

About the EGW Picatinny Rails Series

EGW Picatinny Rails are built around the idea of giving shooters and gunsmiths a solid, one-piece mounting platform for modern optics. Within EGW’s lineup, this family covers practical scope-mount solutions for common rifle actions as well as raw rail material for custom work. The series is known for its use of 6061-T6 aluminum in standard-duty designs, balancing low weight, good rigidity and straightforward machinability for everyday sporting and precision applications.

A defining trait of the series is the one-piece Picatinny interface, which gives more freedom in ring placement than older two-piece bases and makes it easier to position a riflescope correctly for eye relief and balance. In EGW’s catalog, the family includes versions in black and silver finishes, along with options in different built-in elevation values on receiver-specific rails. The design language is practical rather than elaborate: a proven rail profile, clean machining and compatibility with a wide range of optic setups. For custom rifle projects, the same series also extends to extrusion blanks that let a gunsmith start from EGW’s established profile and machine the final base to the exact action and application.

About the EGW Scope Mount Extrusion 609mm

The EGW Scope Mount Extrusion 609mm is not a finished receiver-specific base but a 24" custom rail blank intended for gunsmithing work. It uses the same general profile EGW employs for its tactical bases, giving the builder a ready-made top section that can then be cut, drilled and shaped for a particular firearm. In practice, that means less time spent creating the rail form from scratch and more control over the details that matter on a custom installation, such as final length, screw spacing and underside contour.

The extrusion is made from aluminum, which keeps the part easy to machine while avoiding unnecessary weight on the rifle. Its 0 MOA inclination makes it a sensible starting point for standard optic setups where additional built-in cant is not required. The 16.51 mm height provides a substantial rail body for machining operations, while the long 609.00 mm format allows one piece to serve multiple smaller projects or one longer custom build. This makes the extrusion especially useful for gunsmiths producing bespoke scope bases, adapting uncommon actions or building mounting solutions where off-the-shelf rails are not available. Rather than locking the user into a finished pattern, it provides the core rail geometry needed to create a mount around the rifle and optic combination at hand.

About EGW

EGW, short for Evolution Gun Works, was founded by George Smith in 1991. The company began as a gunsmithing shop in Doylestown, Pennsylvania, and later established its base in Quakertown, Pennsylvania, United States. That background is important to its product range: EGW developed from practical workshop experience rather than from a single-product catalog.

Today, the company designs and manufactures firearm parts and accessories with a strong presence in scope mounts and scope rings. Its wider catalog also covers 1911 parts, AR and rifle components, red dot mounts and thread protectors. For optics mounting products, EGW is especially well known for producing practical rail and base solutions that address both factory-fit applications and custom gunsmithing work. That focus makes the brand a familiar name among shooters who need dependable mounting hardware rather than decorative extras.

Main Features

• Manufacturer: EGW
• Mount series: EGW Picatinny Rails
• Made in: USA
• Material: Aluminium
• Color: Black
• Length: 609.00 mm
• Height: 16.51 mm
• Inclination: 0 MOA

Warranty

EGW provides a 2-year warranty for this scope mount extrusion. That period suits a component intended for custom machining and installation, giving clear coverage in years rather than an open-ended warranty description.