Dentler Steel mount, 34 mm

• Steel construction: The mount body is made from steel, giving the assembly the rigidity and wear resistance needed for repeated optic changes and long-term use on hunting rifles.
• Repeatable detachable design: As part of the Dentler BASIS system, this mount is built for removing and refitting the optic with the same interface geometry, which helps preserve zero when switching setups.
• 34 mm ring format: The 34 mm configuration fits larger riflescope tubes commonly used on modern hunting and precision optics, making it suitable for scopes with greater adjustment range and larger internals.
• Dentler interface compatibility: The underside is designed for the Dentler Mounts Interface, so the mount can be integrated into a modular rifle-and-optic setup rather than tied to one fixed combination.
• KR 0.0 mm extension: The neutral extension keeps the optic in a centered mounting position, which is useful when the rifle and scope already provide the required eye relief without extra offset.

About the Dentler Steel Mounts Series

Dentler Steel Mounts are the steel-bodied optic-side components within the Dentler BASIS mounting system. The series is built for hunters who want a robust detachable mount that forms part of a modular rifle-and-optic setup rather than a one-piece solution dedicated to a single firearm. In the BASIS concept, the rifle carries the base rail while the optic carries the mounting rail, allowing optics and rifles to be combined within the same system.

A defining characteristic of the series is its focus on repeatable removal and reattachment. Dentler describes the BASIS interface as locking onto the base without play, using steel crossbars and a locking pin as part of the clamping mechanism. In practice, that matters when an optic is removed for transport, replaced with another sight, or moved between compatible rifles while maintaining a consistent mounting relationship. The series also covers different optic connection formats, including ring mounts and model-specific rails, which makes it suitable for traditional riflescopes as well as selected platform-specific optics.

About the Dentler Steel mount, 34 mm

The Dentler Steel mount, 34 mm is a detachable ring-style optic mount made for riflescopes with a 34 mm main tube. That tube size is common on larger hunting and long-range scopes, where the extra internal space often supports broader elevation travel and more mechanically substantial designs. By using a 34 mm ring format, this mount is suited to optics that are typically chosen for demanding field use and extended-distance shooting.

The mount uses a steel body with a black matte finish, prioritizing strength, stable clamping and resistance to wear from repeated installation cycles. In practical terms, steel is especially relevant in a detachable mount because the contact surfaces and locking areas are subjected to repeated engagement over time. The KR 0.0 mm extension keeps the scope in a neutral fore-and-aft position, which is useful when the rifle stock geometry and scope eye relief already align well and no additional offset is needed.

Compatibility with the Dentler Mounts Interface makes this model part of a broader modular system rather than a standalone ring mount. That is the main advantage of the design: the optic can remain on its dedicated mount while the interface handles repeatable attachment to the corresponding Dentler base. For hunters using more than one optic setup, or for those who remove a scope for transport or storage, this approach combines the solidity of steel rings with the convenience of a repeatable quick-detach mounting system.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company specializes in modular riflescope mounting systems for hunting firearms, with its best-known platforms being BASIS and BASIS VARIO. The BASIS concept uses a firearm-specific base rail combined with an interchangeable optic mounting rail, while BASIS VARIO adds continuous height and windage adjustment at the base level.

Dentler’s expertise is centered on giving hunters a structured way to pair optics and rifles without abandoning repeatability. Its mounting rails are offered for a wide range of optic interfaces, including Aimpoint, Pulsar, Swarovski, Zeiss and Weaver/Picatinny formats, and the company lists compatibility with firearms from makers such as Benelli, Browning, Merkel, Heckler & Koch and Rößler. That focus on modularity and rifle-specific fit is what defines the brand in the hunting optics mount category.

Main Features

• Manufacturer: Dentler
• Mount series: Dentler Steel Mounts
• Made in: Germany
• Warranty: 30 years
• Extension (KR): KR 0.0 mm
• Scope / Sight type: 34 mm
• Color: Black - Matte
• Material: Steel
• Compatibility Above: 34 mm
• Compatibility Below: Dentler Mounts Interface

Warranty

Dentler provides a 30-year warranty for this mount. A long warranty period is especially relevant for a steel mounting component intended for repeated optic changes and long service on hunting rifles.