Dentler Mounting rail BASIS - PARD NV008/SA35/SA45

• Modular BASIS interface: This mounting rail is built for the Dentler BASIS system, so the optic-side rail stays on the device while the base remains on the rifle. That makes it practical for hunters who move compatible optics between rifles without changing the basic mounting concept.
• Repeatable detachable fit: The BASIS system is designed for a play-free, repeatable lock-up with consistent tightening torque. In practice, that supports reliable reinstallation after removal and gives more confidence when swapping a night vision or thermal unit between setups.
• Dedicated PARD compatibility: The rail is configured for PARD NV008/SA35/SA45 devices, giving these optics a direct interface to the Dentler ecosystem. This avoids improvised adapters and keeps the mounting arrangement clean and purpose-built.
• Lightweight aluminium body: Its aluminium construction keeps weight down while maintaining the rigidity needed for field use. That matters on hunting rifles where added bulk at the top of the firearm can affect balance and handling.
• Made in Germany: German manufacture and Dentler’s focus on hunting mounts point to a product built around precise fit and system compatibility. For the user, that means a rail intended to integrate neatly with the rest of the Dentler mounting platform.

About the Dentler Dural Mounts Series

Dentler Dural Mounts are the aluminium-bodied optic-side components within the company’s modular mounting family. In the Dentler lineup, they sit alongside the broader BASIS and BASIS VARIO systems, which are built around a simple idea: the rifle carries a dedicated base, while the optic carries its own matching rail or ring module. This approach suits hunters who use more than one optic or who want a repeatable detachable mount without changing the mounting standard on the firearm.

Within that system, Dural modules provide a lighter alternative to steel optic mounts while keeping the same modular logic. The series covers different optic interfaces, ring diameters and heights, so it can be adapted to conventional riflescopes as well as specialist sighting devices. A key characteristic of the platform is its play-free, repeatable fit, with the optic rail designed to lock onto compatible BASIS and BASIS VARIO bases using the same consistent clamping principle. For hunting use, that means one mounting family can support different sighting solutions, from daytime optics to digital night vision and thermal devices, while preserving the practical advantage of quick removal and reattachment.

About the Dentler Mounting rail BASIS - PARD NV008/SA35/SA45

The Dentler Mounting rail BASIS - PARD NV008/SA35/SA45 is a dedicated optic-side rail for integrating selected PARD night vision and thermal devices into the Dentler mounting system. Rather than relying on a generic clamp or a one-size-fits-all adapter, this rail is shaped around the Pard NV008 mounting standard, which makes it a cleaner and more secure solution for these devices on rifles already equipped with a compatible Dentler base.

Its role is straightforward but important: it creates the connection between the optic and the rifle-side Dentler interface. Because it belongs to the BASIS family, it is intended for users who value a detachable setup with repeatable positioning. That is especially relevant with add-on digital and thermal optics, where the ability to remove the unit for transport, storage or switching between rifles can be just as important as the initial installation.

The rail uses a black matte aluminium body, which helps keep the assembly lighter than a comparable steel optic mount and avoids unnecessary top-side weight on the rifle. Its KR 0.0 mm extension indicates a neutral layout, useful when the goal is to keep the optic in its intended position without adding forward or rearward offset. For hunters using PARD devices in low-light or nighttime conditions, this rail provides a purpose-built way to connect the optic to the Dentler ecosystem while retaining the practical benefits of a modular, repeatable mount.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company focuses on modular riflescope mounting systems for hunting firearms, with its best-known platforms being BASIS and BASIS VARIO. Dentler’s core idea is to separate the rifle-side base from the optic-side mount, allowing compatible optics to be detached and reattached within one consistent system.

The brand’s expertise is centered on hunting-oriented mounting solutions rather than general accessories. Its product range includes optic rails for formats such as Aimpoint, Pulsar, Swarovski, Zeiss and Weaver/Picatinny, as well as firearm-specific base rails for rifles from makers including Benelli, Browning, Merkel, Heckler & Koch and Rößler. That specialization has given Dentler a strong reputation among hunters looking for a modular mounting platform made in Germany and designed around repeatability, compatibility and practical field use.

Main Features

• Manufacturer: Dentler
• Series: Dentler Dural Mounts
• Made in: Germany
• Mount type: LM Rail
• Extension (KR): KR 0.0 mm
• Material: Aluminium
• Color: Black - Matte
• Compatibility above: Pard NV008 Mounting Standard
• Compatibility below: Dentler Mounts Interface

Warranty

Dentler provides a 2-year warranty for this mounting rail. This stated warranty period matches the product’s general specification and suits a precision-made mounting component intended for regular field use.