Audere Adversus GEN 2 Mount, 34 mm, 20 MOA

• 20 MOA cant: The built-in forward inclination preserves more scope elevation for long-range shooting, helping riflescope adjustment travel stay available when dialing at distance.
• 34 mm one-piece mount: A rigid single-body design keeps the optic aligned under recoil and hard field use, which supports repeatable zero and consistent tracking.
• Adjustable windage: Lateral adjustment in the mount gives extra setup flexibility, useful when fine-tuning optic alignment on precision rifles and tactical platforms.
• 7075-T651 aluminum construction: High-strength alloy and hard-use machining deliver the stiffness needed for heavy optics without the weight penalty of steel.
• ScopeLink compatibility: Interface points on the mount allow accessories to be added as part of a modular rifle setup, useful for clip-on or auxiliary optical equipment.

About the Audere Picatinny Rails Series

Audere Picatinny Rails sit within the company’s rifle-accessory range as mounting solutions built around the needs of military, law-enforcement, shooting-sports, and hunting users. The series is based on STANAG 4694 rail geometry for mounting optics and tactical sighting devices, with versions offered for a wide spread of rifle platforms including Browning BAR and Benelli Argo, Franchi Horizon and Momentum, Remington 700, and Tikka T3/T3X. That broad platform coverage makes the series relevant to both sporting rifles and more specialized precision setups.

The range includes aluminum and steel variants, allowing users to choose between lower weight and maximum mass, while the available 0, 10, 20, and 30 MOA inclinations let the mounting system be matched to the rifle’s intended distance envelope. In practical terms, the series is aimed at shooters who need a stable optic interface and who want to preserve adjustment travel for longer shots when required. The design philosophy is straightforward: provide a secure, standardized base for modern optics and sighting accessories across a broad mix of field, hunting, and tactical applications.

About the Audere Adversus GEN 2 Mount, 34 mm, 20 MOA

The Audere Adversus GEN 2 Mount, 34 mm, 20 MOA is a fixed one-piece scope mount intended for rifles that need a stable optic platform and extra elevation bias for distance work. Its 34 mm ring diameter suits modern precision riflescopes with larger main tubes, while the 20 MOA inclination shifts the optic’s mechanical center in a way that helps preserve internal elevation adjustment for long-range dialing. For shooters building a precision, tactical, or hunting rifle around a Picatinny interface, that makes the mount especially relevant when the optic is expected to work beyond ordinary zero distances.

The mount uses a 38.00 mm height and 125.00 mm length, giving practical clearance for larger ocular housings and objective bells while maintaining a compact footprint on the rail. Its adjustable windage adds another layer of setup control, useful when centering the optic and refining alignment on rifles where every bit of adjustment range matters. Audere’s Adversus design is also built as a modular system with ScopeLink interfaces, so the mount can serve as more than a simple ring-and-base assembly when a rifle carries additional optical accessories.

Construction is focused on rigidity and repeatability. The mount is CNC-machined from 7075-T651 aluminum and finished with Type III hardcoat anodizing, a combination chosen for strength, wear resistance, and dependable clamping without unnecessary bulk. In use, that translates into a mount that is suited to hard-recoiling rifles, repeated transport, and demanding field conditions where zero retention and mechanical stability matter as much as low weight.

About Audere

Audere is a manufacturer of tactical equipment and small-arms accessories based in Cailungo, Republic of San Marino. The company focuses on products for military, law-enforcement, shooting-sports, and hunting users, with a catalog centered on mounting solutions and other rifle accessories. Within its scope-mount range, Audere is known for product families such as Adversus and Levitas, both aimed at shooters who need secure optic mounting on modern rifle platforms.

In this category, Audere’s reputation rests on practical engineering rather than decorative design. Its Adversus mounts are built for compatibility with 1913 and NATO rails, and the company’s ScopeLink system adds interfaces for attaching optical accessories directly to the mount. Audere also specifies CNC machining from 7075-T651 aluminum with Type III hardcoat anodizing for the Adversus line, reflecting a clear emphasis on strength, repeatability, and field durability in tactical and precision shooting applications.

Main Features

• Product type: Fixed scope mount
• Series: Audere Picatinny Rails
• Tube diameter: 34 mm
• Inclination: 20 MOA
• Windage adjustable: Yes
• BH height: 21.00 mm
• Height: 38.00 mm
• Length: 125.00 mm
• Material: Aluminium
• Compatibility: Picatinny Rail

Warranty

Audere provides a 2-year warranty for this mount. That period suits a hard-use rifle accessory where consistent clamping strength, finish durability, and mechanical stability are central to long-term performance.