RCBS Collet 7mm/284 for Bullet Puller

• Caliber-specific 7mm/.284 fit: sized for 7mm/.284 bullets, this collet gives the bullet puller a secure grip on the correct projectile diameter so bullets can be removed cleanly with less risk of slipping or marking the jacket.
• For the RCBS Standard Bullet Puller: built to work with the RCBS Standard Bullet Puller body, it turns the puller into a caliber-matched tool for correcting loads, salvaging components, or breaking down ammunition safely at the loading bench.
• Hardened steel construction: the steel body resists wear from repeated use and helps the collet keep its shape, which matters when consistent grip is needed across multiple cartridges.
• Made for jacketed and monolithic bullets: suited to common bullet types such as FMJ, JHP, HP and all-copper projectiles, it gives reloaders one practical solution for many centerfire disassembly tasks.
• Compact bench accessory: with a 76.00 mm length and 50.00 g weight, this collet is easy to store with reloading dies and puller parts while adding almost no bulk to a bench kit.

About the Standard Bullet Puller Collet Series

The RCBS Standard Bullet Puller Collet series is a line of caliber-specific accessories made for the company’s Standard Bullet Puller. Rather than relying on a one-size-fits-all grip, these collets match bullet diameter to the puller so the tool can hold the projectile more securely during removal. That approach is especially useful for reloaders who need to correct seating depth, disassemble questionable handloads, or recover components without unnecessary damage.

Across the series, the emphasis is on precise fit, hardened steel construction, and straightforward bench use with a conventional reloading setup. RCBS positions these collets as practical workshop tools for ammunition handloading, where repeatability and component protection matter more than speed alone. Because each collet is caliber-specific, the series lets the reloader tailor the puller to the bullet being worked on, which improves grip consistency and helps reduce the chance of marring jacketed or monolithic bullets during the pulling process. It is a simple system, but one that fits well into careful, methodical case and cartridge work.

About the RCBS Collet 7mm/284 for Bullet Puller

The RCBS Collet 7mm/284 for Bullet Puller is the caliber-specific insert for reloaders working with 7mm/.284 bullets. Its job is straightforward but important: it gives the RCBS Standard Bullet Puller the correct gripping surface for this bullet diameter, helping the tool remove projectiles with better control than a generalized fit would allow. In practice, that matters when correcting a bad powder charge, changing bullet selection, or pulling loaded rounds apart to recover usable components.

RCBS builds this collet from steel, and the benefit is durability under repeated clamping cycles. A properly sized steel collet helps maintain even grip pressure, which is useful when trying to pull jacketed bullets without excessive marking. The design is intended for jacketed and monolithic bullets, so it suits many common centerfire rifle loading tasks in this diameter range. Because it is made specifically for the RCBS Standard Bullet Puller, it becomes part of a modular system: the puller body provides the operating mechanism, while the collet supplies the caliber match.

Its 76.00 mm overall length and 50.00 g weight keep it compact and easy to handle at the bench. For reloaders who organize tools by cartridge family, this makes it a practical accessory to keep alongside dies, shell holders, and case-preparation tools. The result is a simple, purpose-built reloading accessory that supports cleaner disassembly work on 7mm/.284 ammunition.

About RCBS

RCBS was founded in 1943 by Fred T. Huntington in Oroville, California. The company name came from Rock Chuck Bullet Swage, the bullet-swaging die that started the business. From those beginnings, RCBS grew into a specialist in ammunition handloading and reloading equipment for rifle and pistol cartridges, with product lines that include presses, dies, shell holders, powder measures, and priming tools.

RCBS remains closely associated with bench reloading in the United States and is based in Oroville, California. Its catalog covers everything from single-stage tools to more advanced press systems, reflecting a long focus on practical equipment for reloaders who want repeatable ammunition assembly and case preparation. That background makes RCBS a natural fit for accessories such as bullet puller collets, where precise fit and dependable workshop use matter more than unnecessary complexity.

Main Features

• Product type: Bullet puller collet
• Manufacturer: RCBS
• Caliber compatibility: 7mm/.284
• Made in: USA
• Material: Steel
• Weight: 50.00 g
• Length: 76.00 mm
• Color: Silver
• Application: Case preparation

Warranty

This RCBS accessory is covered by a 2-year warranty.