INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 34 mm

• Two-piece 34 mm ring layout: The separate ring design gives more flexibility in scope placement, making it easier to achieve proper eye relief and balance with larger tactical or hunting optics.
• ZERO mounting system: INNOmount’s ZERO concept is built for repeatable reinstallation, helping preserve point of impact when the optic is removed and fitted again on the same rail setup.
• Weaver / Picatinny compatibility: The mount fits the most common rail standard in sporting and tactical rifles, so it works across a wide range of platforms without needing a rifle-specific base.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity needed to hold a 34 mm riflescope securely under regular field and range use.
• 0° alignment: With no built-in cant, this mount suits general-purpose sight setups where a neutral optic position is preferred for conventional zeroing and everyday shooting distances.

About the INNOmount Two-Piece Mounts Series

INNOmount Two-Piece Mounts are designed as a versatile family of scope mounts for shooters who want a compact, repeatable interface between rifle and optic. The series is offered with Weaver/Picatinny bases, placing it in a part of the lineup that suits both modern sporting rifles and precision-oriented bolt actions. Across the range, the two-piece format keeps the mounting system adaptable, especially when scope tube length, turret position, or rifle ejection-port clearance call for more freedom than a one-piece bridge can provide.

Within the series, INNOmount offers a broad selection of upper interfaces, including ring variants from 25.4 mm to 40 mm as well as rail-specific options for premium optics. Quick-detach versions use retractable locking levers with thumb-operated buttons, and the levers are recessed to reduce the chance of accidental release. That design reflects the series’ overall philosophy: secure clamping, repeatable positioning, and straightforward handling without unnecessary bulk. In practice, these mounts are aimed at hunters and rifle shooters who need a low-profile, robust mounting solution that can be matched to different optics and rifle platforms.

About the INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 34 mm

The INNOmount Two-Piece ZERO Mount for Weaver / Picatinny, 34 mm is built for shooters using a 34 mm scope tube on a rifle equipped with a Weaver or Picatinny rail. That combination is common with modern long-range, tactical, and hunting optics, where larger tube diameters often bring greater internal adjustment range and more robust scope construction. The two-piece arrangement helps accommodate these scopes without forcing a fixed bridge layout, which is useful when turret housings, saddle position, or eye-relief requirements vary from one optic to another.

The defining feature here is the ZERO mounting concept, which is intended for repeatable removal and reattachment. For shooters who alternate between optics, transport rifles with the scope removed, or maintain more than one sighting setup, that repeatability matters because it reduces the need for frequent re-zeroing. The mount also uses a 0° angle, giving the optic a neutral starting position that suits general-purpose zeroing rather than a pre-canted long-range setup.

Its aluminium construction keeps the mount practical for field use while still providing the stiffness needed for reliable scope retention. The black finish gives it a subdued appearance that matches most rifles and optics. With no windage adjustment and no integrated bubble level, the design stays focused on its core job: providing a straightforward, repeatable 34 mm ring mount for rifles with a standard rail interface.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. The brand focuses on rifle mounting solutions for hunting and shooting applications, with a range that includes tactical, swing, and tilt-up mounts as well as quick-clamping and fixed designs. INNOGUN also manufactures hunting rifles, rifle-scope mounts, and red-dot sights at its Fuchsstadt site, which places mounting technology within the company’s core area of expertise rather than as a side product line.

Within the INNOmount range, the company covers common optic interfaces with ring sizes including 25.4 mm, 30 mm, 34 mm, and 35 mm, alongside mounts for rail-based optics and rifle-specific mounting bases. That breadth is important in practice because it shows a design approach centered on compatibility across different rifles and sighting systems, from conventional sporting setups to more specialized tactical configurations.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Two-Piece Mounts
• Made in: Germany
• Mount type: Two-piece mount
• Rail compatibility: Weaver / Picatinny
• Scope / sight compatibility: 34 mm
• Cant: 0°
• Windage adjustable: No
• Bubble level: No
• Material: Aluminium
• Color: Black

Warranty

10 years. This mount is covered by a ten-year warranty period, making it suitable for long-term use on working hunting rifles and regular range setups.