INNOmount ZERO Mount for Tikka T3, 35 mm

• Tool-free quick-detach design: The ZERO mount attaches and removes in two quick steps, so a riflescope can be taken off for transport or swapped between setups without reaching for tools.
• Repeatable return to zero: INNOmount positions the ZERO system as a repeatable mount, which helps preserve point of impact after reattachment and makes it practical for rifles that alternate between optics.
• Built-in torque lock: The clamping system is designed to maintain consistent force and compensate for small base tolerances, supporting secure fit and dependable alignment on compatible rifles.
• 35 mm ring configuration: The mount is made for 35 mm scope tubes, giving a direct fit for larger main-tube optics that often offer broader adjustment range and robust mechanical construction.
• 0 MOA, straight-line layout: With 0 MOA inclination, KR 0.0 mm extension and 0° offset, this mount keeps the optic centered in a neutral position that suits general hunting and sporting rifle setups.

About the INNOmount ZERO Mounts Series

INNOmount ZERO Mounts sit within the brand’s quick-detach tilt-up mount range and are built for shooters who want fast optic changes without giving up repeatability. In the INNOmount lineup, the ZERO family stands alongside fixed and other QD systems, but it is defined by its tool-free handling and by a clamping concept intended to keep mounting force consistent from one installation to the next. That makes the series especially relevant for hunting rifles and multi-optic setups where a day scope, thermal device or digital optic may be used on the same rifle platform.

A key characteristic of the series is the integrated torque lock, which is designed to compensate for small dimensional differences between compatible weapon bases while maintaining even clamping pressure. The ZERO range also covers several mount formats, including one-piece, two-piece and multifunction variants, as well as versions with ring mounts or optic-specific interfaces. Some models are offered with 20 MOA pre-tilt for applications that need additional elevation reserve, while 0 MOA versions suit more conventional sighting distances. Across the series, the design focus is low-profile mounting, quick handling and repeatable reattachment for practical field use.

About the INNOmount ZERO Mount for Tikka T3, 35 mm

The INNOmount ZERO Mount for Tikka T3, 35 mm is a rifle-specific quick-detach mount built for the Tikka T3 and T3x platform and sized for optics with a 35 mm main tube. That combination makes it a strong match for modern hunting optics and larger tactical-style riflescopes that use a 35 mm tube for increased internal adjustment travel and sturdy mechanical construction. Because the mount is tailored to the Tikka action pattern, it gives a direct interface that avoids the extra height and added parts often associated with adapter-based solutions.

This version uses a 0 MOA inclination, KR 0.0 mm extension and 0° offset, so the optic stays in a neutral, centered position over the rifle. In practice, that suits shooters who want a straightforward setup for general hunting, range use or a conventional zeroing distance rather than a long-range canted arrangement. The ZERO system’s quick-detach operation is particularly useful when the rifle must be transported compactly, cleaned with the optic removed, or switched between different sighting systems while keeping the mounting process simple and consistent.

The mount body is made from aluminium and finished in black, balancing low weight with the rigidity expected from a repeatable scope mount. This model does not use windage adjustment or an integrated bubble level, which keeps the layout clean and focused on secure ring mounting. For shooters using a Tikka rifle with a 35 mm scope, it provides a practical combination of rifle-specific fit, fast handling and repeatable reinstallation.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. The company’s work centers on hunting rifles, riflescope mounts and red-dot sights manufactured at its Fuchsstadt site, which gives the brand a clear focus on firearm and optic integration rather than general outdoor accessories. Within that range, INNOmount covers both quick-clamping and fixed rifle mounts for a wide variety of platforms.

The brand’s catalog includes mounts for Weaver/Picatinny rails as well as numerous rifle-specific bases, and it also spans several mounting concepts such as tactical, swing and tilt-up mounts. INNOmount further supports a broad selection of optic interfaces, including scope rings in 25.4 mm, 30 mm, 34 mm and 35 mm diameters. This specialization has given the brand a reputation for practical mounting solutions that address both traditional hunting rifles and more modular optic setups.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount ZERO Mounts
• Made in: Germany
• Mount type: Detachable repeatable mount
• Compatible rifle: Tikka T3, Tikka T3x
• Ring diameter: 35 mm
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Offset angle: 0°
• Windage adjustable: No
• Bubble level: No
• Material: Aluminium
• Color: Black

Warranty

INNOmount provides a 10-year warranty for this mount. That stated warranty period matches the product’s general specification and gives long-term support for a component intended for repeated installation and removal.