INNOmount Fixed Variable Mount for Sako, Pulsar Thermion

• Fixed one-piece design: The mount creates a rigid connection between rifle and optic, helping a Pulsar Thermion stay aligned under recoil and during regular field use.
• 29.00 mm build height: This height helps position the optic low and stable over the action, supporting a natural shooting position without adding unnecessary bulk.
• 0 MOA inclination: A straight, neutral setup suits general hunting and thermal use where a simple, direct zero is preferred over an angled long-range base.
• Made for Pulsar Thermion optics: The interface is configured for the Thermion format, giving a cleaner and more secure fit than a generic mounting solution.
• Sako-specific compatibility: The mount is built for a wide range of Sako rifles, reducing guesswork and giving a model-matched fit on the correct action types.

About the INNOmount One-Piece Fixed Mounts Series

INNOmount One-Piece Fixed Mounts sit in the brand’s range as a straightforward solution for shooters who want a tool-secured, non-quick-detach mounting system. In this series, the mount is fixed to the rifle with clamping screws tightened by torque wrench, creating a connection that is intended to stay in place until it is deliberately removed. That makes the series especially relevant for hunting rifles and thermal or digital optics that are meant to remain dedicated to one firearm.

The series covers more than conventional daytime scope use. INNOMOUNT positions these mounts as lightweight aluminum solutions for day optics, thermal imaging, and digital optics, which is important for rifles that carry heavier electronic sights or need a model-specific interface. The one-piece layout keeps the setup compact and mechanically simple, while the range itself spans different rifle platforms and optic connection standards. Another practical point is flexibility over time: fixed mounts in this series can be upgraded to the ZERO quick-detach system, so the user is not locked into one mounting concept forever. Overall, the series is aimed at shooters who value a low, stable, rifle-specific installation over rapid removal.

About the INNOmount Fixed Variable Mount for Sako, Pulsar Thermion

The INNOmount Fixed Variable Mount for Sako, Pulsar Thermion is a rifle-specific mounting solution built for pairing a Pulsar Thermion thermal riflescope with compatible Sako actions. Its purpose is clear: provide a stable, repeatable platform for a thermal optic that is often used in low-light hunting, pest control, and observation where confidence in zero matters as much as image quality. By using a mount tailored both to the rifle family and to the Thermion footprint, the setup avoids the compromises that can come with more universal adapters.

The mount uses a fixed one-piece construction, which favors rigidity and mechanical simplicity. In practice, that means fewer separate parts, a clean profile on the rifle, and a secure connection that is not meant to shift during normal use. The 29.00 mm height helps keep the optic at a practical level above the receiver, balancing clearance with a controlled cheek weld. With 0 MOA inclination, the mount is set up for a direct, neutral zeroing arrangement that suits typical thermal hunting distances rather than specialized long-range correction. The listed KR 0.0 mm extension keeps the optic position straightforward, which is useful when the rifle and optic already match well in eye position and overall balance. Finished in black, the mount maintains a discreet appearance that suits both traditional hunting rifles and modern thermal setups.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG. The company is based in Fuchsstadt, Germany, where it manufactures hunting rifles, riflescope mounts, and red-dot sights. Within that portfolio, INNOmount focuses on mounting solutions for sporting and hunting firearms, covering both quick-clamping and fixed designs.

The range is broad rather than limited to one interface style. INNOmount offers mounts for Weaver/Picatinny rails as well as several rifle-specific mounting bases, and the line includes tactical, swing, and tilt-up mount types. The brand also supports multiple optic connection standards and ring diameters, including 25.4 mm, 30 mm, 34 mm, and 35 mm. That specialization makes INNOmount particularly relevant in categories where secure fit, low build height, and compatibility with both conventional optics and thermal devices matter.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Fixed Mounts
• Made in: Germany
• Mount height: 29.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Optic / sight type: Pulsar Thermion
• Color: Black
• Upper compatibility: 30 mm
• Lower compatibility: Sako 75 I, Sako 75 III, Sako 75 IV, Sako 75 SM, Sako 75 V, Sako 85 L, Sako 85 M, Sako 85 S, Sako 85 SM, Sako 85 XL, Sako 85 XS, Sako L461 Vixen, Sako L579 Forester, Sako L61R Finnbear, Sako L691, Sako M591, Sako MA 05 L, Sako MA 05 M, Sako MA 05 S, Sako MA 05 SM, Sako MA 05 XS, Sako S491, Sako TRG-S M995, Sako TRG-S M995 Magnum

Warranty

INNOmount provides a 10-year warranty for this mount. That long coverage period suits a component designed for permanent rifle installation and regular field use.