INNOmount Fixed Variable Mount for Sako, ATN 4K

• One-piece fixed design: The mount keeps the optic and base in a single rigid unit, which helps maintain alignment and gives a stable platform for digital day optics on Sako rifles.
• 29.00 mm construction height: This height helps position an ATN 4K sight at a practical level above the action, supporting a consistent cheek weld and comfortable sight picture.
• 0 MOA inclination: A neutral cant suits general hunting and field shooting setups where a straightforward optical alignment is preferred over built-in long-range elevation bias.
• Tool-secured attachment: The fixed system clamps to the rifle with screws rather than a quick-release lever, giving a secure installation that resists unintended movement under regular field use.
• Sako-specific fit with 30 mm interface: Built for a wide range of Sako actions and a 30 mm mounting standard, it simplifies pairing the correct rifle platform with the intended optic body.

About the INNOmount One-Piece Fixed Mounts Series

INNOmount One-Piece Fixed Mounts sit within the brand’s broader mount range as the more permanent alternative to its quick-clamping systems. The series is built around a simple idea: a mount should create a secure mechanical connection between rifle and optic without adding unnecessary complexity. In this family, the mount is attached with clamping screws tightened by torque wrench, producing a connection that cannot be loosened without tools. That makes the series well suited to shooters who want a dedicated setup for a specific rifle and optic combination.

The series reflects INNOMOUNT’s focus on lightweight aluminum mounting solutions for day optics, thermal imaging and digital devices. Fixed models are offered across several rifle and rail interfaces, including rifle-specific bases as well as common rail standards, and the line also covers different optical interfaces used by modern sporting and hunting optics. A practical advantage of the system is that it keeps the installation straightforward while still leaving room for future changes, as the manufacturer states that these fixed mounts can be upgraded to the ZERO quick-detach system. For shooters who value repeatable positioning, low added bulk and a clean one-piece layout, this series fills that role clearly.

About the INNOmount Fixed Variable Mount for Sako, ATN 4K

The INNOmount Fixed Variable Mount for Sako, ATN 4K is a rifle-specific mounting solution made for pairing an ATN 4K optic with compatible Sako actions. Its one-piece layout helps keep the optic and mounting base in firm alignment, which is especially useful with digital day optics that benefit from a stable, repeatable position on the rifle. Because this is a fixed mount, it is intended for shooters who want the optic to remain dedicated to one rifle rather than being swapped between platforms in the field.

The mount uses a 29.00 mm construction height and 0 MOA inclination. In practical terms, that gives a neutral setup for general-purpose hunting and field shooting, without introducing extra cant intended for specialized long-range dialing. The absence of adjustable windage keeps the design straightforward and mechanically clean, which suits users who prefer to center the optic through the rifle and sight adjustment system rather than through the mount itself. Its black finish gives the mount a subdued appearance that matches most modern rifles and digital optics.

Compatibility is a major part of this model’s appeal. It is built around a 30 mm mounting standard and fits a broad selection of Sako rifles, including multiple Sako 75, Sako 85 and classic Sako actions. That broad fitment makes it a practical choice for shooters using established Sako hunting rifles while moving to an ATN 4K digital sight. The result is a mount that prioritizes secure attachment, model-specific fit and a tidy installation for a dedicated rifle-and-optic combination.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of practical shooting and hunting equipment rather than generic accessories. Within that portfolio, INNOmount focuses on mounting systems for a wide range of rifles and optics.

The brand’s range includes quick-clamping and fixed rifle mounts, along with tactical, swing and tilt-up designs. INNOmount also supports multiple mounting standards, from Weaver and Picatinny interfaces to several rifle-specific bases, and offers ring diameters including 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth shows a clear specialization in connecting modern optics to equally varied rifle platforms, with an emphasis on precise fit, low-profile construction and application-specific mounting solutions.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Fixed Mounts
• Made in: Germany
• Mount type: One-piece fixed mount
• Optic interface: ATN 4K
• Tube mounting standard: 30 mm
• Construction height: 29.00 mm
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Adjustable windage: No
• Color: Black
• Compatibility below: Sako 75 I, Sako 75 III, Sako 75 IV, Sako 75 SM, Sako 75 V, Sako 85 L, Sako 85 M, Sako 85 S, Sako 85 SM, Sako 85 XL, Sako 85 XS, Sako L461 Vixen, Sako L579 Forester, Sako L61R Finnbear, Sako L691, Sako M591, Sako MA 05 L, Sako MA 05 M, Sako MA 05 S, Sako MA 05 SM, Sako MA 05 XS, Sako S491, Sako TRG-S M995, Sako TRG-S M995 Magnum

Warranty

INNOmount provides a 10-year warranty for this mount. That term reflects the product’s role as a durable mechanical interface designed for long-term use on a dedicated rifle and optic setup.